Used Hilma Vl 125 for sale (3,914)

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Bjdpfx Akjxw Rdfsqsdd Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Bedpfozgbmijx Akqodd Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Hollow spindle stop Diameter 125 mm Bdedpfx Akodbc E Neqod Weight 6.6 kg

Condition: like new (used), Tower clamping system TS 125 Magnum Jaw width 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Overall height 780 mm Clamping stroke per clamping slide 64 mm Clamping force 40 kN Price: 7,850.00 € + VAT Item 2 4 hydraulic clamping cylinders Jaw width 125 mm Overall length 400 mm Price per unit 850.00 € + VAT Price for 4 units 3,000.00 EUR + VAT Item 6 Preci Tool NC, Type 125 Jaw width 125 mm Overall length 430 Only 1 fixed jaw Price: upon request Item 8 HILMA machine vise with rotary table Mechanical/hydraulic Clamping force 40 daN Jaw width 125 mm Overall length 430 mm Price: 850.00 € + VAT Item 9 HILMA machine vise Mechanical/hydraulic Clamping force 50 daN Jaw width 160 mm Overall length 550 mm Price: 900.00 € + VAT Item 10 HILMA machine vise Mechanical/hydraulic Clamping force 25 daN Jaw width 100 mm Overall length 380 mm Price: 650.00 € + VAT Item 11 HILMA machine vise with rotary table Bdsdpsidl Rrjfx Akqed Mechanical/hydraulic Clamping force 40 daN Jaw width 125 mm Overall length 430 mm Price: 850.00 € + VAT Item 12 HILMA machine vise with rotary table Mechanical/hydraulic Clamping force 50 daN Jaw width 160 mm Overall length 620 mm Price: 1,050.00 € + VAT Item 26 HILMA machine vise (trade fair model) Jaw width 125 mm Overall length 430 mm Price: upon request Item 28 HILMA machine vise Mechanical/hydraulic Clamping force 25 daN Jaw width 100 mm Overall length 570 mm Price: 700.00 € + VAT Item 32 Clamping angle Clamping surface 160 x 420 mm Price: 150.00 € + VAT Item 33 Clamping angle with HILMA clamping cylinder Jaw width 125 and load cell Price: 450.00 € + VAT

Condition: excellent (used), Extension for HILMA vice Bdsdsnl Drzopfx Akqsd jaw width 160 mm Jaw width extension length of tie rod 560 mm Weight 21,5 kg

Condition: good (used), Technical data for the pallet rack traverse: Rack system: Stow Type: Pal Rack NS Included in delivery are: 01x pallet rack traverse, used Material color: RAL 2004 orange box profile: 125 x 50 mm type of cross beam: PNB0485/1.5 Bdedpfolvrg Rsx Akqod agraffe: 4 HK (hooks) clear width: 3.600 mm max. load per truss pair 1.832 kg, with evenly distributed load 02x safety pins, used design: compl. galvanized To secure the longitudinal beams against unintentional lifting out

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Bedpfjxt Ibyex Akqedd Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow Bdodpjx Suzajfx Akqed * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: excellent (used), Hydraulic vise Manufacturer: Hilma Jaw width 200 mm Jaw height 65 mm Maximum clamping width 440 mm Overall height 160 mm Overall length 1030 mm Shipping dimensions: L 700 mm W 280 mm H 160 mm Bedpfok N A Dmox Akqsdd Weight 115 kg

Condition: used, thickness of jaw 200 mm Bdjdpfsy Sullex Akqed

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 Bdjdpfoyuqxrjx Akqed • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system.

Condition: good (used), I am selling a HILMA-ROEMHELD machine vice, good condition. Bsdpfx Ajv Upvrokqsdd

Condition: good (used), 1 used vise Manufacturer: Hilma Model: KNC 160 For horizontal clamping Clamping against fixed jaw Mechanically operated With mechanical-hydraulic force transmission With fully encapsulated spindle Jaw width: 160 mm Max. clamping force: 50 kN Max. clamping range: 436 mm Bedpfx Akew Skgdsqsdd Overall length: 594 mm Overall height: 115 mm

Condition: excellent (used), Year of construction: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner 10500kw, oil+gas. Year of manufacture 2013. Bdodpfsvrkcnjx Akqjd

Condition: good (used), Busch SE 125 Pile Turner Bdodszfww Ispfx Akqed This machine is like new, fully functional, and ready to use. This turner is from the German manufacturer Busch. This is the current model in production. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Device weight: 850 kg Power supply: 380 V Controlled from a control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Includes documentation.

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Bjdpfx Akey Iaa Teqsdd Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: excellent (used), Vice Bsdswf Hdaopfx Akqsdd Hydraulic Vice Manufacturer: Hilma Jaw Width: 125 mm Jaw Height: 43 mm Max. Clamping Length: 220 mm Rotary Plate Height: 140 mm Weight: 43.5 kg Stock Number: (28623)

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Bjdpfexl Rgiex Akqedd

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan Bsdpfxsyc H Npo Akqedd

Condition: good (used), Hilma machine vice 200mm Bdedovpuw Dopfx Akqsd Good condition, fully functional. Jaw width 200mm, clamping range approx. 110mm.

Condition: used, machine/vehicle number: 01655, jaw width: 125 mm jaw height: 42 mm span length: 175 mm Bsdpfx Akjdqgiyjqjdd height of construction: 108 mm

Condition: good (used), jaw width: 160 mm jaw height: 50 mm span width: 310 mm Bdsdpsd Hyfzjfx Akqod total height: 132 mm

Condition: used, jaw width: 200 mm Bdodo Ixyvopfx Akqjd jaw height: 67 mm span width: max. 340 mm span power: bis 100 kN total height: 167 mm weight: 120 kg

Condition: ready for operation (used), jaw width: 100 mm jaw height: 41 mm span width: 160 mm Bdsdod Hurfepfx Akqsd total height: 127 mm

Condition: used, jaw width: 200 mm jaw height: 67 mm span power: bis 10000 kg Bdodpfx Akjbp Tucjqjd total height: 207 mm weight: 120 kg