Used Helmerding Erh 75 B for sale (44,497)

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t Ndsdsd Nl E Uspfx Abyec total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min Ndsdpep Apxhofx Abysc ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t Nedpfxelp U Rve Abyjdc dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm Nsdpfx Abst Ei Hneyodc weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Nsdpfxerm Nqmo Abysdc Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: used, functionality: limited functionality, overall weight: 2,100 kg, workpiece diameter (max.): 70 mm, spindle diameter: 54 mm, type of input current: three-phase, spindle speed (max.): 114 rpm, spindle speed (min.): 24 rpm, roll width: 160 mm, stroke length: 15 mm, SENY D-75-B – Hydraulic Thread Rolling Machine – 220 kN For sale is a fully functional hydraulic thread rolling machine from the Spanish manufacturer SENY, model D-75-B, with a maximum rolling force of 220 kN. Due to operational changes, the machine has been taken out of service and is no longer in productive use. However, it is still operational and can be inspected and demonstrated under power after prior appointment. The machine is designed for chip-free cold forming of external threads, as well as for knurling and profile rolling operations. The thread rolling process enables the production of high-strength threads with very good surface quality, without removing material. Technical data General information Manufacturer: SENY Country of manufacture: Spain Type: D-75-B Factory number: 327 Machine type: Hydraulic thread rolling machine Year of manufacture: Unknown Operating voltage: 380 V three-phase Rolling capacity and machining range Maximum rolling force: 220 kN (approx. 22.4 t) Workpiece diameter: 3–70 mm Maximum thread pitch: 6 mm Ndedpfx Aoz Sl Arobysc Maximum knurling pitch: 2.25 mm Maximum rolling width: 160 mm Rolling spindles Rolling diameter: 133–170 mm Rolling spindle diameter: 54 mm (standard version) Rolling spindle spacing: 135–230 mm Rolling spindle speeds: 24 / 30 / 38 / 45 / 62 / 72 / 90 / 114 rpm Hydraulics and feed Hydraulic roller feed Maximum working stroke: 15 mm Feed speed: 0.5–6 mm/s Adjustable rolling time: 0.1–100 seconds Adjustable pause time: 0.1–100 seconds Hydraulic oil tank: approx. 130 liters Drive power Main motor: 5.5 kW Total electrical power consumption: approx. 8.6 kW Weight Machine weight: approx. 2,100 kg Condition and scope of supply Used industrial machine Fully functional Taken out of service due to operational changes Machine is still operational Inspection and demonstration under power possible after prior appointment No thread rolling tools or rolling sets included in the scope of supply Possible applications The machine is particularly suitable for the production of external threads on screws, bolts, threaded rods and other cylindrical workpieces. In addition, knurling and profile rolling operations are possible with the appropriate tools. The robust machine design and hydraulic feed enable use in both single-piece production and series production. Inspection and further information The machine can be inspected and demonstrated under power after prior appointment. Further information and pictures are available on request. Note: The technical data is based in part on manufacturer and comparative documentation of the SENY D-75-B series. Deviations due to the year of manufacture or design may occur. All information without guarantee. Subject to prior sale.

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68113, Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity, enlarging holes approx. 80 mm - Thread cutting up to approx. M 40 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Work area on base plate approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - central clamping system Nedpjzii Sfofx Abyjdc - Coolant system - Space required approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Condition: good (used), Year of construction: 1977, 1 used eccentric press Make: Helmerding Model: EL 35 B Year of manufacture: 1977 Machine no.: 5182 Pressing force: 350 kN Adjustable stroke: 12 - 80 mm Adjustable slide: 70 mm Slide strokes per minute: 110 Adjustable table: 150 mm Safety distance: 150 mm Overrun: 50 mm Weight: 2050 kg Equipped with Ndsdpfx Aowxxr Aebyec press safety valve

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Ndedpfx Abeyath Tsyjc Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Nedpfx Ajxx Nuxsbyjdc Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, stroke length: 275 mm, throat depth: 410 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table height: 900 mm, oil tank capacity: 300 l, overall weight: 9,086 kg, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 175 t, clearance between the columns: 2,600 mm, distance table to ram: 550 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Nsdpfxsz Dn Hue Abyedc Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: excellent (used), Year of construction: 2014, 5-axis machining center Brand: DMG MORI Type: DMF DMU 75 Monoblock Year: 2014 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 600mm / 600kg 35 kW spindle – 18,000 rpm 60-position tool changer Nedpfxsz E R D Sj Abyodc TS 649 probe 3D quickset Center coolant system, 40 bar 600l coolant tank with paper filtration Infrared tool probe Coolant gun Chip conveyor Specifications: Table surface 800 x 650 mm (dia 600 inclinable) X-axis travel 750 mm Y-axis travel 650 mm Z-axis travel 560 mm B-axis -/+120° C-axis 360,000° Spindle speed 2 - 18,000 rpm Spindle power 35 KW Spindle taper SK 40 Rapid traverse XYZ 40 m/min Machine dimensions approx. 3200 x 2600 x H 2900 mm Weight approx. 11,600 kg

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Nodperuq Dfjfx Abyjdc

Condition: used, Year of construction: 2017, Manufacturer: DMG MORI, Type: DMU 75 monoBLOCK, Year of manufacture: 2017, Serial number: 12430007443, Operating hours: 28,368, Spindle hours: 11,627, Control system, Manufacturer: Heidenhain, Type: iTNC 530, 21" Operator terminal ERGOline Touchscreen, Tool changer, 63-position SK 40, Travel range X/Y/Z: 735 x 650 x 560 mm, Spindle speed max.: 12,000 rpm, Machine table clamping area: 1,000 x 650 mm, Coolant system, Oil mist extraction, Chip conveyor, Chip cart Ndsdoz Tlucspfx Abysc +++ IMPORTANT: This machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Njdpfx Aoug Edkobyedc Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides - 2 additional, automatically positionable material clamps Nodpfozz Tbhex Abyjdc - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled - 2-layer machining - Minimum quantity lubrication - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 362 h, functionality: fully functional, machine/vehicle number: 12430021383, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl Operate, spindle speed (max.): 20,000 rpm, Auction of a DMG DMU 75 Monoblock + Pallet Handling PH150! Only 362 spindle hours! TECHNICAL DETAILS Travel in X-axis: 750 mm Travel in Y-axis: 650 mm Travel in Z-axis: 560 mm Main drive and spindle Main drive: AC motor, digitally controlled Motor spindle: speedMASTER Warranty period of the motor spindle: 36 months Speed range: max. 20,000 rpm Spindle mount: HSK-A 63 Acceleration time: approx. 2.6 s Deceleration time: approx. 2.6 s Drive power at 40% duty cycle: 35 kW Drive power at 100% duty cycle: 25 kW Spindle torque at 40% duty cycle: 130 Nm Spindle torque at 100% duty cycle: 86 Nm Spindle bearing inner diameter (front): 80 mm Spindle bearing inner diameter (rear): 55 mm Number of T-slots: 4 × 14 H12 T-slot spacing: 63 mm Centering bore: 50 mm Thread: 8 × M12 Tilting axis A Tilting angle towards the working spindle: +120° Tilting angle away from the working spindle: −120° Torque of tilting axis: 3,400 Nm Holding torque of tilting axis: 3,400 Nm Holding torque of tilting axis with hydraulic clamping: 6,200 Nm Rapid traverse of tilting axis: 40 rpm Feed rate of tilting axis: 20 rpm Input and display resolution: 0.001° Bidirectional accuracy of tilting axis A: A ≤ 9 arc seconds Permissible moment of inertia of tilting axis: max. 59 kg·m² Rotary axis C Rotary range of C-axis: 360° Torque of rotary axis: 2,000 Nm Holding torque of rotary axis: 2,000 Nm Feed rate of rotary axis: 7,200°/min Bidirectional accuracy of rotary axis C: A ≤ 7 arc seconds Table load: max. 600 kg Permissible moment of inertia of rotary axis: max. 48 kg·m² Workpiece diameter: max. 840 mm Machinable diameter: 650 mm Workpiece height: 500 mm MACHINE DETAILS Control system: Siemens 840D sl Operate Cooling system: Liquid cooling Lubrication: Oil-air lubrication Operating hours Power-on hours (according to counter): 1,166 h Spindle hours (according to counter): 362 h Further technical data can be found in the attached offers. Nedez I Tcispfx Abyodc

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 4,500 kg, sheet thickness steel (max.): 8 mm, total width: 1,700 mm, total length: 5,500 mm, total height: 2,300 mm, sheet thickness (max.): 5 mm, type of input current: AC, input voltage: 400 V, Professional circle shear and flanging machine from the Italian brand PB Engineering – model MTD B 5075/8. This robust machine is ideally suited for the precise cutting and flanging of round and conical sheet metal parts. Ideal for the construction of containers and tanks, as well as the production of rings, discs, and flanges. The machine enables efficient trimming and flanging of bottoms, lids, and conical parts in a single process. Very well suited for the production of tanks, containers, and large parts. Technical data: • Year of manufacture: 2010 Njdjz Sriwjpfx Abyjdc • Electrical voltage: 400V/50Hz • Machine weight: 4500 kg • Dimensions: 5500 x 1700 x 2300 mm (L x W x H) Maximum workpiece dimensions: • Square workpiece, max. side 3500 mm • Octagonal workpiece, max. 5000 mm • Maximum diameter 5000 mm • Round drawn parts, max. diameter 5000 mm • Maximum sheet metal thickness, iron: 8 mm / stainless steel 5 mm • Cavity: 750 mm • Flanging with interchangeable rollers for various radii possible • Suitable for flat and conical workpieces • Vertical cutting and flanging on the outer and inner circumference The machine is fully functional.

Condition: used, Year of construction: 2023, operating hours: 1,500 h, Yanmar B 75 W Year of manufacture: 2023 1500 hours !!!!! POWERTILT !!!!! Full hydraulic quick coupler on the Powertilt 3 buckets Air conditioning German machine, first owner Complete piping/connections for hammer/grab/shear Tires approx. 60-70% Operating weight approx. 7200 kg Ready for immediate use Delivery possible Ndjdpfx Aoy Uqftjbysc Financing possible ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/p?????/?????... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and VAT number. VAT deposit: 2000 € Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer to Munich Airport or Passau train station

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm Ndedpfxjxh Sx Es Abyjc tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: good (used), Year of construction: 2007, operating hours: 37 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,750 mm, controller manufacturer: ABB, controller model: 66-55456 (IRC5 Dual), teach pendant manufacturer: ABB, teach pendant model: FlexPendant: 10 m kabelis, input voltage: 400 V, Equipment: documentation/manual, Complete ABB IRB 6650-200 / 2.75 industrial robot package (Serial No. 66-55293). Includes the robot arm, IRC5 control cabinet, a 10m FlexPendant, and 15m connecting cables. In working condition, stored indoors on a pallet. Located in Riga, Latvia. Ndedpfxezqd Ecs Abyjc

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Njdewl Rucopfx Abysdc Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: reconditioned (used), Stock - No.: 2553 Ndjdoiyynwjpfx Abyec 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Ndsdpeiyyndjfx Abyjc > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2015, operating hours: 715 h, condition: good (used), KÄRCHER B 150 R with R head (cylinder brush scrubbing deck) Ride-on scrubber-dryer This KÄRCHER B150R was manufactured in 2015 and has only 715 total operating hours. It is in good overall condition with the usual signs of wear and tear. Comparable to a new price of €19,000! The price is plus 19% VAT! Nsdpfx Aoivt Hbebyjdc - Inspection/test drive is possible at any time. - Nationwide shipping can be arranged; the costs depend on the distance.