Used Helmerding Eccentric Press - Single Column for sale (22,960)

Condition: used, Year of construction: 1989, pressure 25 t throat 190 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm table surface area 550 x 370 mm hole in the table 200 x 155 mm table height over floor 660 mm ram surface 280 x 160 mm total power requirement 1,5 kW weight of the machine ca. 1,9 t Gsdpsz Rqnpefx Aivjbu - Ortlinghaus hydraulically operated clutch with dual brake - fixed table Machine is partially overhauled in-house

Condition: used, Single-column eccentric press HELMERDING Type EH 25 B Machine No. 5917 Year of manufacture: 1993 Pressing force: 25 tons Throat depth: 180 mm Table area: 560 x 360 mm Ram area: 315 x 150 mm Table through-hole: 150 x 100 mm Stroke adjustment: 8 - 82 mm Ram adjustment travel: 60 mm Installation height max.: 330 mm Clamping pin bore: Ø 40 mm Strokes per minute: 145 Table height adjustment: 150 mm Godeyath Tspfx Aivsbu Table height above floor: 630 - 780 mm Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Hydraulic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand control - Automatic central lubrication by BEKA lubrication system - Electrical cabinet with 2-channel contactor control - Press table height-adjustable via 2 threaded spindles - UVV [accident prevention regulations] according to VBG 7n 5.1 for manual loading operations - Electrical diagram Space requirements (L x W x H): 1600 x 1100 x 1900 mm Weight: 2 tons Good condition

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm Gbsdpfep Apxhsx Aivou

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Gbjdpoyiflmsfx Aivou

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Gbodpohz Ua Sjfx Aivsu

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Gbodpjv Uraajfx Aiveu Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: excellent (used), pressure 50 t Gbsdpfx Aistrhf Aeveu throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Gbsdpfev Tp D Hox Aivju Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Year of construction: 2002, pressure 80 t throat 300 mm stroke 8-110 mm no. of strokes 100 Hub/min ram - range of adjustment 75 mm table surface area 750x590 mm ram surface 540x400 mm hole in the table 200x200 mm Gsdpfoy I Dd Nox Aivebu table height 780 mm tool hole in ram Ø 40 mm total power requirement 11 kW weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 1200x1700x2700 mm

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm Gedpfsd Nl E Uox Aivsbu ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm Gsdjxu Dwmjpfx Aivjbu sheet thickness continuous stroke : 2,25 mm ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min shut height (stroke down, adjustm. up) 260 mm Gbjdpfxoz N Hu Ne Aiveu ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: used, Year of construction: 1986, pressure 35 t throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm Gbjdpfx Aisxh Sx Ejvju

Year of construction: 1980, condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Approximate technical data: - Pressing force 10 t - Overhang 150 mm - Table size 520 x 320 mm - Adjustable table height 160 mm - Through-hole in the table 165 x 125 mm - Overall installation height 220 mm - Ram area 240 x 150 mm - Dowel hole in the ram 30 mm - Ram adjustability 40 mm - Stroke adjustment 4 - 60 mm - Stroke rate 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet Gbedpfx Aijktg Dheveu - Drive 380 V / 1.1 kW - Space requirement approx. W 1000 x H 1800 x D 1100 mm - Weight approx. 1300 kg

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm ram surface 120 x 100 mm dayligth 250 mm total power requirement 1,1 kW weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m Gbsdpfet Tqglox Aivju

Year of construction: 1985, condition: used, pressure 110 t throat 295 mm stroke 20-120 mm no. of strokes 60/90 Hub/min ram - range of adjustment 85 mm table surface area 920x580 mm Godpfx Aijlp U Rvevobu ram surface 540x280 mm hole in the table 300x180 mm table height 830 mm tool hole in ram Ø 50 mm weight of the machine ca. 5,1 t dimensions of the machine ca. BxTxH 1500x2000x2500 mm

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Gbodpsz Alg Ssfx Aivou Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: good (used), Manufacturer: DIGÉP Gbodpfjm Uc R Ajx Aivju Tip: SD 100

Condition: used, Year of construction: 1992, pressure 25 t Gbedsykb Ebepfx Aivou throat 375 mm stroke 8 - 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW weight of the machine ca. 2,5 t

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Gbsdpfxjt Ei Hno Aiveu Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm Gedpfxetx E Rqs Aivobu - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, pressure 45 t Gbjdpoykb Ddofx Aivsu throat 230 mm stroke 10 - 140 mm no. of strokes 80 Hub/min ram adjustment 55 mm total power requirement 3,0 kW weight of the machine ca. 2,7 t

Condition: used, pressure 25 t throat 250 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 1,5 kW Gbedpfoykb A Tjx Aiveu weight of the machine ca. 1,95 t

Condition: used, pressure 35 t throat 300 mm Gedpfsykb D Rjx Aivjbu stroke 10 - 120 mm no. of strokes 110 Hub/min ram adjustment 50 mm total power requirement 3 PS

Condition: used, pressure 100 t throat 355 mm stroke 8 - 130 mm table surface area 710 x 1200 mm T-slots at tabel 3 clamping plate thickness 75 mm no. of strokes 50/80 Hub/min ram adjustment 80 mm ram surface 450 x 560 mm T-slots at ram 2 tool shank hole (depth x diameter) 100 x 50 mm max. distance table - ram 540 mm distance between columns 400 mm connected load 11,5 kW weight of the machine ca. 9,0 t Overall size 1,65 x 2,25 x 3,05 mm - increased installation height Gbsdpfxetqm Dhj Aivju - with die cushion - converted to safe control (Pilz PLC), safe for “hand inlay work”. on the open tool"