Used Heller Drz20-2-1250 for sale (79,447)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Dcodpfxszdpvge Aa Hjl Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Dsdpfxswgm Hkj Aa Hjcl Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis HELLER MC 16-2 was manufactured in 1999. It features a Siemens control system, a robust tool magazine with 160 slots, and an HSK-63A tool holder. The spindle operates at a speed of 10,000 rpm, ideal for detailed machining tasks. If you are looking to get high-quality milling capabilities, consider the HELLER MC 16-2 machine we have for sale. Contact us for more information about this machine. Dcsdpfxex D I Alo Aa Hol • Control: Siemens Sinumerik 840D • Tool magazine: 160 • Tool holder type: HSK-63A

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis Dcodewgndkopfx Aa Hol m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2016, operating hours: 60,000 h, functionality: fully functional, Heller FMS with 2 x H2000 Machine make / type: HELLER H2000 Operating hours: 59,654 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: PC63 10,000 rpm, 38 kW, 242 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 160 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Djdpfswbt Rrjx Aa Hscl Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make / type: HELLER H2000 Operating hours: 60,546 Year of manufacture: 2016 Control system: Siemens 840D SL Spindle: SC63 16,000 rpm, 40 kW, 96 Nm Tool clamping system: SK40 Magazine / locations: Chain magazine / 240 locations Convenient operator terminal, setup during machining Rotary table: 360,000° x 0.001° Coolant system: Knoll KF 400/50 bar Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Workpiece clamping: Mechanical Additional options, special features: Drill breakage detection (SBBK); FMS interface, infrared receiver probe (Renishaw), extraction interface; coolant cooler Machine make/type FASTEMS FPC750 with expansion container Operating hours: No counter installed Year of manufacture: 2016 Control system: FASTEMS Memory locations: 24 memory locations, 2 setup stations Workpiece clamping: Mechanical Additional options, special features: 20 pallets included Further information and technical specifications upon request.

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Dcjdsx U Ectepfx Aa Hjl Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U Djdpjvcrmpefx Aa Hscl power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: good (used), Year of construction: 1985, functionality: fully functional, spindle mount: MK 5, height adjustment type: mechanical, total width: 2,100 mm, total length: 900 mm, total height: 3,300 mm, overall weight: 3,000 kg, drilling capacity: 60 mm, clearance between the columns: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 20 rpm, spindle stroke: 400 mm, Radial drill BR 40/2 x 1250. Prod. Heckert (GER). Year 1985. Max drilling diameter in steel (mm) - 60 mm Max threading diameter in steel - M24 Max workpiece height - 1100 mm Spindle stroke - 400 mm Arm length - 1250 mm Arm rotation - 360 Drill attachment - MK5 Rotation speed range (rpm) - 20-1200 rpm Feed range - 0.063-0.63 mm/rev Base plate mounting surface - 1400 x 800 mm Table dimensions - 650 x 650 x 500 mm Machine dimensions width x depth x height - 2100 x 900 x 3300 mm Dsdpfx Aaowazbvo Hocl Motor power - 3.7 kW Weight - 3 tons

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg Dsdpjxd Rgmofx Aa Hscl - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: new, Year of construction: 2025, Decoiler RAZ-DV 1250/2 - up to 2,0 t stationary - with 4 clamping arms, ball bearings and with disc brakes Dcjdpfx Aov I Ur Esa Hel - ecordable coil width: 1250 mm - Upper loading capacity: 2.000 kg - Downer loading capacity: 2.000kg

Condition: refurbished (used), Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Dcodpfx Aaezr If As Hsl Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Dsdpfxjzncnko Aa Hjcl Spindle speed: 12,500 rpm Number of axes: 4 Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Dcedpfx Aszncndja Hol Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines Dcsdpfxjx D Skmo Aa Hol • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Dcodpouxdhuefx Aa Hjl

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Dcsdpfxozpyg Tj Aa Hel Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: new, Gebr. Heller uni-Pro DIGI-Drive E3 23.020212 X VPS 30A-N12, new, in sealed original packaging, 100% functional. Dcsdpfx Aoi D U Sfoa Hel

Condition: new, Heller SL90 F A 23 Uni Pro CNC 90 interface card in opened original packaging, 100% functional. Dedpfx Aji Ea E Roa Hocl

Condition: new, Heller CANCPU A 23 Uni Pro PLC 90 < unused > 100% functional. Dcedpfx Aei Ea Exsa Hel

Condition: new, Heller CPU91 E93 H 23 Uni Pro PLC 90 < unused > 100% functional. Dodpfji Ea E Hsx Aa Hjcl

Condition: ready for operation (used), Heller PLT 90 uni-Pro CNC 90 control panel SN:00214 - without key, used, good condition, 100% working, scope of delivery as per photos Dodpfetyr Avox Aa Hjcl

Condition: ready for operation (used), Heller uni-Pro 24.000914 monitor with 20.003 / E 23 control card, used, in good condition, 100% functional, scope of delivery as per photos Dcsdpfxjy Nrwas Aa Hjl

Condition: new, Heller ACPU90-SE D 23 Digi Drive ACPU90-S J 22 Uni Pro < unused > 100% functional. Dcedoi Ea Emepfx Aa Hel

Condition: ready for operation (used), Heller XGC90 H 23 Uni Pro CNC 90 graphics card, used, 100% functional. Dcedpfx Aoi Ea Hvsa Hjl

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Dcsdpsx Hn D Refx Aa Hel Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.