Used Groove-End Finishing Machine for sale (68,044)

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Bdodpfsy Hvp Ujx Aa Ijh

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approximately 60,000 packs (approximately 40 operating hours) processed during the trial run! For sale is an absolutely like-new, high-end thermoforming packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was purchased in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in the cleanroom, dust-free • Operating hours: Only approximately 60,000 individual packs (equivalent to approximately 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approximately 700 cm x 140 cm x 230 cm (including discharge conveyor) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: no compressor included! Bjdezwgxrspfx Aa Iodh 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides a highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format layout: 4 lanes side by side / 1 row (pp. 13-14) • Actual cavity inner dimensions per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimensions (L x W): 185 mm x 82 mm (pp. 14, 23) • Package depth: 19.5 mm (mold plate type 5, directly water-cooled) (pp. 14-15) • Infeed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (included!) • Integrated printer: MULTIVAC MR293 HP/TT in-line direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers, and expiration dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge conveyor: High-quality Intralox discharge conveyor (800 mm) with a blue Intralox chain and its own frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection bars installed on the tool side for packaging under modified atmosphere are available. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic wiring diagrams in German included in the scope of delivery (pp. 19-20). 💰 Price € 39,900,- net, excluding VAT. • Shipping costs: Available upon request, throughout Europe • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT, ex wareh

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Bdsdewk Rlxepfx Aa Ijh Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Bodpfxepr Utle Aa Isdh Tube diameter 6 - 40 mm Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. Bsdpjid Iymofx Aa Ijdh To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 Bedsg Umitspfx Aa Iedh 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new round bending machine with only 26 operating hours! TECHNICAL DETAILS Work area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheet: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L x W x H): 1,850 x 700 x 1,200 mm Weight: 520 kg EQUIPMENT 3-roller round bending machine with asymmetrical roller arrangement Robust machine frame made of spheroidal graphite cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric locking for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control console with foot switch for left/right operation Emergency stop safety cable Side cover Operating manual Bsdpfxoz Dw Eme Aa Iodh

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm Bodpfeid Ixdjx Aa Isdh With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system Bsdoz D Sn Nepfx Aa Ijdh * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment * Selling price: €14,500 net plus statutory VAT.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) Bedpfol Dw D Esx Aa Iedh - Weight: 3560 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Bodpfxozqun Ue Aa Iodh Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Bdodszuzpyspfx Aa Ieh Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 indicational EUR 195.000 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: Bdedpfx Aezyq Ivoa Ish - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: Bodpfx Asw Ixw Aoa Isdh • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Condition: reconditioned (used), IRD Model B750 End Drive Balancing Machine. Capacity 34,000kg (75,000lbs). Maximum Balance Length 5000mm (Approx). Max Rotor Diameter 3250mm (128"). Max Journal Diameter 508mm (20"). With IRD Model 295 Balancing Instrument and Operating Manual. Bedpfxjz Eay No Aa Isdh For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79268 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21137, tank capacity: 50 l, usable tank capacity: 36 l, input voltage: 230 V, inner dimension width: 280 mm, inner dimension length: 600 mm, COMPLETE ORIGINAL DESCRIPTION IN THE IMAGE GALLERY Mobile Vibratory Finishing Machine EUROTEC TV25-M – Vibratory Deburring System with Noise Protection For sale is a mobile vibratory finishing machine, EUROTEC TV25-M, in a compact design. This machine is ideal for deburring, rounding edges, smoothing, cleaning, and polishing various workpieces. Technical data: Manufacturer: EUROTEC Innovation Model: TV25-M (TV25 compact) Mobile vibratory finishing machine with complete noise protection enclosure Gross volume: approx. 50 liters Net volume: approx. 36 liters Connected power: 0.5 kW Bdedpfx Aezktcqsa Ijh Operation via 230 V (Plug & Play) Working container: approx. 600 × 280 mm Electronic control with timer Frequency converter integrated Integrated process water treatment Process water feed pump 3-stage process water cascade (70 liters) Automatic shutdown after processing time expires Highly wear-resistant polyurethane lining Integrated scraping edge Very quiet operation due to complete noise protection enclosure Equipment: - Automatic compound dosing unit (TV25-M ACD5) - Partition module for dividing the working container (TV25 TW-G) for simultaneous processing of multiple batches - 3 stainless steel sieve boxes (TV25-M Skxx) - Various grinding media (ceramic and plastic): more detailed description see images Advantages: - Complete system on a chassis – ready for immediate use - Compact design - Easy operation - Ideal for small and medium-sized series - Uniform and reproducible processing results - Robust industrial quality The machine is in excellent condition and has been used only a few times. It has been used exclusively in a professional setting. New price as of 15.03.2023: €19,885.53 net

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: Bsdszqnxtjpfx Aa Isdh 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Bdsdoxmlinopfx Aa Ijh

Condition: excellent (used), Year of construction: 2025, operating hours: 3,700 h, functionality: fully functional, machine/vehicle number: 21220, total height: 1,310 mm, tank capacity: 450 l, usable tank capacity: 310 l, input voltage: 400 V, outer diameter: 1,480 mm, We offer this very well-maintained rotary vibrator RA21, manufactured in 2025. This rotary vibrator is a versatile finishing machine for deburring, rounding, and polishing parts. It offers high finishing performance, easy operation, and reliable processes. The rotary vibrator has a sloped container bottom, which reliably guides the workpieces to the integrated screening area. The large screening area with a tangential outlet ensures safe separation of workpieces and grinding media. An automatic washing system is installed, which automatically removes grinding dust from the parts. The cleaning centrifuge is used to process contaminated process fluids. These systems are characterized by their high cleaning performance and are equipped with a separate process water tank for dirty and clean water. Bjdpfezgti Aox Aa Ijdh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,895 h, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Bdodezu Ix Uspfx Aa Ioh Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Total weight: 4,000 kg Operating hours: 9,895 h

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 Bjdpfxez E T Tvo Aa Iedh - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine Bjdpfx Aezb Ab Esa Iodh • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Bsdpozizu Eefx Aa Ijdh Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen Bdjdpfxsu Utzys Aa Ijh • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Polishing machine, TROMA Model T 60-1 - Capacity: 60 liters - Stepless speed control via frequency inverter - Trough diameter: 680 mm - Overall height: 750 mm - Drive power: 1.1 kW - Drain valve - Total weight: 110 kg Errors and omissions excepted. Bdsdpszzqa Ijfx Aa Ish