Used Goma Single-Sided Tenoning Machine for sale (81,843)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8/2017, working width: 180 mm, total height: 1,300 mm, overall weight: 800 kg, saw blade diameter: 200 mm, spindle diameter: 40 mm, input voltage: 380 V, type of input current: DC, Used Goma machine for manufacturing French herringbone flooring. An excellent tool for producing high-quality wooden flooring. It allows for the quick and precise production of flooring elements – herringbone patterns – with a choice of 3 angle types (45 degrees, 60 degrees, 90 degrees). The machine is in good working order and comes complete with 2 sets of saw blades and diamond cutters, as well as 3 types of tables with different angle settings. Year of manufacture: 2017. After installation, the machine is ready for operation. Lrjdpfx Aioza U H Djgjr

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function Lodpfxsztl Scs Aigerr GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Year of construction: 1961, condition: used, functionality: fully functional, machine/vehicle number: 15/15/61, VEB Ellma Double-ended tenoning machine - 1100, manufactured in 1961. Machine designation and size: KS Lrjdpfx Aozavpgoigsr Manufacturing number and year of construction: 15/15/61 Total weight: 5.55 t Wiring diagram: G1-106/1 Sp Wiring diagram code: Lp Voltage type: ~ Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected power: 15 kW Machine rated current: 28 A Auxiliary machine rated current: 2 A Time-delay fuse: 25 A The used double-ended tenoning machine is in working order; it was mainly used for precisely cutting door components to length. The electrical components have recently been replaced, including a new electrical panel, as well as the feed motor and speed control mechanism. The machine has 2 vertical saws and 8 milling cutters, including 2 horizontal saws.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Lrjdezuyhhjpfx Aigsr Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Ledpfxezuyp Ej Aigerr Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. Lodpezuyhnefx Aigsrr - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 Lrjdpfx Ajzuyh Uoiger 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom Lrsdpfsztpw Nox Aigsr - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit Lredezuykvopfx Aiger for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Ledpfxeydnxno Aigorr Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: good (used), Brandt edgebander (Homag group) for roll and ABS edge banding. Complete with pre-milling units at entry and all profiling groups with corner rounding units. In perfect working condition. Lrsdoy N Ukispfx Aigor

Condition: used, machine/vehicle number: D 395T5, With the NOVA-3 tenoning machine, two rounded tenons of different sizes and inclinations can be produced at both ends of a solid wood part at the same time. The innovative technology of the NOVA-3 makes it the leading double-sided tenoning machine on the market. ROBUST MECHANICS Torsion-free, stress-free annealed steel welded construction, large-dimensioned processing units with supports and slides made of gray cast iron, absolutely vibration-free. Mechanics designed for high operational reliability with the highest production output. Lrjdpfx Aioxrpkmegor USER FRIENDLINESS The new swivel system of the processing units enables short set-up times, in which the position of the tools always remains constant when swiveling around the vertical as well as the horizontal axis, i.e. the swivel point always corresponds to the tool position. Even if the inclination changes, the shoulder length of the workpieces remains the same. FLEXIBILITY NOVA-3 is an extremely versatile processing machine. The large and reliable mechanics, the sophisticated design of the processing units and the innovative swivel system allow both short, heavily deformed workpieces and large parts to be machined with equal precision and high cutting performance. For the latter, the stable machine structure and the performance of the motors are a decisive factor. The flexibility is further underlined by the range of loading magazines; Depending on requirements, the customer can equip his machine with the ADR or APPC automatic loading system. The workpieces are loaded from suitable reference points. The processed parts run out at the bottom of the machine and can therefore be easily removed by the operator, transferred to a conveyor belt or placed in a container. No manual intervention is required for this, the operator only has to load the magazine.

Year of construction: 2016, condition: new, The single-sided polishing machine is a polishing machine for both manual and robotic processing, used for polishing parts made of aluminum, steel, brass, and zinc die-cast. Technical data: Polishing disc: max. Ø 450 mm Spindle diameter: 35 mm Polishing disc width: max. 50 mm Dust extraction connection: Ø 100 mm Dimensions (L x W x H): 1800 x 1300 x 1800 mm Weight: approx. 180 kg Connection voltage: 3 x 400 V Connection power: 4 kW Height to polishing spindle adjustable to customer requirements Lrjdpfoc Rfg Ujx Aigjr Made in Germany Warranty: 12 months Optional: Extension with a frequency converter will cost 950 euros per polishing machine. 1 frequency converter, 1 potentiometer for control, 1 main switch.

Condition: excellent (used), CATALOG NUMBER: 6969 Ljdpfezc Iv Dox Aigsrr TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, functionality: fully functional, machine/vehicle number: 102, Jumberca SJM-3 single-sided circular knitting machine, machine number 102. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA: Diameter: 30 inches, Gauge: GG 24, Number of needles: 2304, Manufacturer: Jumberca S.A., Badalona, Made in Spain, No CE marking. APPLICATION: Single-sided knitted fabric in fine gauge: shirts, underwear, nightwear, and lightweight outerwear. Ljdpjzvphtofx Aigsrr FREQUENCY CONVERTER: The machine is equipped with a 400 V Toshiba frequency converter mounted on the control column, with electronic speed regulation. INSTALLED EQUIPMENT: Toshiba 400 V frequency converter, Kübler hour meter and counter, Jumberca panel with eight indicator lights, main switch, Square D control panel with start, stop, and emergency stop buttons, Memminger-IRO Pulsonic 3 Mini lubricator, complete upper cam, fabric take-up system with chains and sprockets. CONDITION: Complete and assembled machine, currently protected with film for storage. Fabric from the last production run remains in the machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: Approximate dimensions: length 2.70 m, width 2.00 m, height 2.70 m. No disassembly required. Location: Albacete, Spain.

Condition: used, functionality: fully functional, machine/vehicle number: 108813364, Single-sided circular knitting machine by Paolo Orizio S.p.A., model JO/5, machine number 108813364. Made in Italy. PLATE DATA · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1860 · Number of feeders: 72 · Cylinder number: 04871290 · Needles: VO 15752 T02SA / T03SA / T04SA · Sinkers: L7 22601 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION Single-sided knitted fabric with 72 feeders: plain jersey, pique, fleece and derivatives for outerwear, sportswear and underwear. INSTALLED EQUIPMENT · Orizio MPF positive feeding system · Hole detector · Needle detector · Revolution counter and pre-selection · Open door warning · UNIWAVE mist lubricator · Complete upper butt · Fabric take-up with upper fan Ledpozvh Swefx Aigjrr INCLUDED OPTIONS The machine panel indicates MPF-UNITS included and ROSEN-UNITS / HOLE-DETECTOR included. LUBRICATION Oil recommended on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION Complete and assembled machine. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain.

Condition: used, functionality: limited functionality, machine/vehicle number: 11862780, Paolo Orizio S.p.A. single-sided circular knitting machine, model FI-HN, machine number 11862780. Made in Italy. NAMEPLATE DATA · Diameter: 30 inches · Gauge: 20 · Number of needles: 1860 · Number of feeders: 96 · Cylinder number: 1860253 · Needles: VO 15752 T02 / T03 / T04 · Sinkers: 209225000 · No CE marking 96 FEEDERS With 96 feeders in 30 inches, this machine has the highest feeder density in the lot. For the same diameter and gauge, a higher number of feeders translates into more production per revolution. APPLICATION Single-sided knitted fabric: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT · Warning panel: network connected, warnings, lighting, Rosen units, open door warning · Two-row counter with preselection · Complete upper fillet LUBRICATION Oils indicated on the nameplate: IP Mellana 150 / Shell Full IP Gear Oil 72 for parts lubricated with oil and the variator; IP Athesia Grease EP2 / Shell Alvania EP2 for greased parts; IP Feltria 46 / Shell Vexilla 6 for needles and sinkers. CONDITION Machine partially disassembled: the cam plate and sinker ring are accessible without covers. Sold as is. An on-site inspection visit can be arranged. Lrodpfx Aezvm Nbeigjr DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: excellent (used), Year of construction: 2002, A medium duty tenoner suitable for many joinery and furniture companies. Lrsdpfjzudt Uox Aigor Fitted with Cut Off saw 250mm Top and Bottom Tenon head 100mm in length (2.2kw) Vertical tenoning Unit 35mm shaft diameter a 180mm in length (3kw) Year 2002 Ex College Machine Condition - Like New

Condition: excellent (used), Year of construction: 2002, A medium duty tenoner suitable for many joinery and furniture companies. Fitted with Cut Off saw 250mm Top and Bottom Tenon head 100mm in length (2.2kw) Ljdpfezudurjx Aigjrr Vertical tenoning Unit 35mm shaft diameter a 180mm in length (3kw) Year 2002 Ex College Machine Condition - Like New

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, One side tenoning machine .Face levelling saw , vertical milling cutter .Sliding table on slides .Machine wigo cast iron , stable .Heads set at an angle .Machine has a pneumatic clamping gate .Manual displacement . Lrodpevfv A Hsfx Aigor

Condition: used, functionality: fully functional, machine/vehicle number: 109116063, Paolo Orizio S.p.A. single-sided circular knitting machine, model JSV-R, machine number 109116063. Made in Italy. Lrsdpezvm Ukjfx Aigjr MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: 20 needles per inch · Number of needles: 1856 · Number of feeders: 44 · Cylinder number: 22101088 · Needles: VO 12362 G02 · Belt: Goodyear 200 S 8 M 2032 · No CE marking APPLICATION: Single-sided knit fabrics: plain jersey, pique, fleece, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Orizio control panel with counter and pre-selection · Labeled indicator light panel · IG455 tachometer · UNIWAVE mist lubricator with pressure gauge and regulator · Drive with stepped pulleys · Complete upper fileta · Hour meter LUBRICATION: Oils specified on the plate: Optimol Optigear 5150 / Shell Omala 220. CONDITION: Complete and assembled machine. A visit can be arranged for inspection and on-site operating test. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). Lsdpfjzvh D Hjx Aigsrr NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, functionality: fully functional, machine/vehicle number: 186, Single jersey circular knitting machine, Jumberca model SLM 3. Made in Spain by Jumberca S.A., Badalona (Barcelona). NAMEPLATE DATA · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking Ljdpfx Aezvh R Heigerr APPLICATION: Single jersey knitting: plain jersey, piqué, and fabrics for outerwear, sportswear, and underwear. FOUR-TRACK CYLINDER: Groz-Beckert Vo-Ls 136.52 cylinder needles in all four positions G001, G002, G003, and G004. Internal set reference SK 20 5727 001/00. A four-track cylinder expands the range of structures the machine can produce compared to a two- or three-track cylinder. EQUIPMENT FITTED · Control cabinet with indicator panel · Kübler counter · Separate main motor · Complete top creel · Gear-driven fabric take-down IDENTIFICATION · Stamped frame number: 209622001 · Dealer: SECONTEX / TEX-ROY S.L., Sta. Agnès de Malanyanes (Barcelona) CONDITION: Machine complete and assembled. Viewing, inspection, and a running test on-site can be arranged. DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No dismantling required · Location: Albacete, Spain

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 988, Jumberca SYX2 single-jersey circular knitting machine, machine number 988, year 1990. Manufactured in Spain by Jumberca S.A., Badalona (Barcelona). MACHINE PLATE DATA: · Diameter: 30 inches · Gauge: GG 18 · Number of needles: 1728 · Plate date: 04/25/1990 · Manufacturer: Jumberca S.A., Badalona, Made in Spain · No CE marking APPLICATION: Single-jersey knitted fabric: plain jersey, pique, and fabrics for outerwear, sportswear, and underwear. INSTALLED EQUIPMENT: · Memminger-IRO LMW 3 yarn control unit · Electrical panel with LOYJE 13.220 transformers and ABB / BBC thermal-magnetic circuit breakers · Transformer with 200, 220, 380, 415, and 440 V taps · Stepped pulley drive · Complete top sinker plate · Emergency stop button NEEDLES: Groz-Beckert Vota 76.48 G09 cylinder needles and SNK 42.37-24 G2 sinkers. Internal set reference: SK 20 5719 001/00. Lrjdjzvh Eqjpfx Aigjr POWER SUPPLY VOLTAGE: The transformer has taps for 200, 220, 380, 415, and 440 V, allowing the machine to be adapted to different power supply networks. CONDITION: Complete and assembled machine. Electrical panel accessible and photographed. A visit can be arranged for on-site inspection and operational testing. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle Lsdpfszc I Tpox Aigsrr - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)