Used Gmeiner Salt Spreader for sale (691)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Ncodpszf E Hqjfx Aiyou Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics Ncsdpfozf E Dvox Aiyju * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: used, functionality: fully functional, Year of construction: 2011, Salt spreader: + Egholm + Compatible with CityRanger / Parkranger 2100 / 2150 + Stainless steel container + Disc spreader Nedszd Atxopfx Aiyjcu + Hydraulically driven + Cover + Year of manufacture: 2011 + Demountable frame Price per unit Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), mileage: 99,747 km, power: 169 kW (229.78 HP), first registration: 12/2005, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 8,300 mm, total width: 2,500 mm, total height: 3,500 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, Technical information Number of cylinders: 5 Engine capacity: 8.867 cc Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: Scania Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: air suspension Nodpfoy Hcygox Aiyjcu Rear axle 2: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.075 kg Carrying capacity: 15.425 kg GVW: 26.500 kg Functional Make of bodywork: Nido Stratos B50-42 VAXN Stratos B50-42 VAXN Pump: Yes Interior Interior: grey History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Car kit - Heavy duty engine brake - Power take-off (PTO) - Radio/CD player - Remote central locking - Speed limiter - Stability control - Toolbox - Visor

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m Njdpovpp S Nsfx Aiyscu - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications Nsdpot N Ty Tofx Aiyocu ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance Nodpfsx Uwp Eex Aiyocu • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: used, Year of construction: 2011, Double auger spreader Drive via vehicle hydraulics Capacity: 1.8 m³ Brine: 840 l Adjustable spreading width CONTROL PANEL FUNCTION NOT TESTED Sale in current condition and only to other businesses! Our business hours: Mon-Thu: 07:00 am - 03:30 pm Fri: 07:00 am - 03:00 pm Offer subject to our general terms and conditions! Ncjdpfex Svrysx Aiyou Sale only to commercial customers! Used vehicles / used equipment sold without warranty of defects as per our terms and conditions! If you have further questions, I am happy to assist you. For viewings and/or test drives, please schedule an appointment in advance! Vehicles/equipment are not always on site.

Condition: new, GALEN Salt Spreader for truck 7m³ capacity of bunker. Stainless steel bunker structure. Speed adjustable chain conveyor. Foldable spreader unit with adjustable height and angle. Easily accessible 2400lt solution tanks, large solution filling pipe. High pressure hydraulic pump for drive system. Nedorcbztopfx Aiyjcu Only 1 piece stock salt spreader and snow plow

Year of construction: 2021, condition: new, Layout: Spreader Ncedpfx Aeph Rmvsiyju Selling price: € 5.250, US$ 5.528 Skid Steer salt and sand spreader is hydraulically powered by your skid steer loader and is designed to handle most dry, free flowing granular materials, including salt, sand, seed and fertilizer. Ideal for sidewalks, parking lots, driveways and roads. This unit is engineered with minimal moving parts to reduce maintenance costs. You will have the ability to scoop your material with your loader and not have to hand fill. There is a manual flow gate assembly to control the flow of light materials to the discharge assembly. Hydraulic hose and couplers are included in the price. For detailed information please contact us

Condition: used, Year of construction: 2011, _____Gmeiner Airport Winter Maintenance Spreader, Icebear 2D. Capacity: 5000 liters of salt, 3000 liters of brine. Spreading width: 24 meters. Mounting engine. Mounted on a hooklift system. Location: 54595 Prüm. Ncsdpfx Aijzdmtcsyou

Condition: used, Year of construction: 2024, operating hours: 435 h, power: 175 kW (237.93 HP), empty load weight: 15,000 kg, Operating hours: 435, First registration: 24.10.2024_____ Two-engine version with JCB 55 kW / Stage 5. Dual-sided dirt pickup, towed. Basic equipment sweeper. Controls: The main control panel is mounted in the center of the cab with a JVM for displaying information on a wide range of sweeper functions, plus download capability for recorded data. Additionally, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for main sweeping functions is mounted on the door side. Suction fan: Variable suction speed from 1,800 rpm to 3,500 rpm, adjustable for different applications. V65t: Higher gear ratio: 1.79:1. Disc brush (gutter brush): Quick-change brush system with variable sweeping speed up to 160 rpm (adjustable from cab). Highly visible signal-yellow brush disc and hose routing. Suction mouth: Aluminum suction mouth with 250 mm inlet diameter and tool-free adjustment. Dust suppression system: Spray heads for dust control located at suction nozzles, disc brushes, and along the vehicle front. "Pressadrain" water reclamation system. EUnited 4-star PM10 certificate. Electrical system: 24 V. All external wiring harness connectors meet IP67 protection standards. External noise / Sound power level: LWA 108 dB(A) for engines with standard power, measured to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured to EC directive 2000/14/EC. Debris container: The superstructure comprises debris container and integrated water tank, made from high-strength Inox steel. Waterproof rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water strainer allows the debris container to be used as a large water tank for street washing. Standard equipment includes rear dump hatch, automatic multi-stage debris container support, two protected rear beacons, and LED work lights. Container volume: 6.5 m³. Tipping angle: 54° (nominal). Door opening angle: 125° (nominal). Water tank: The baffled water tank can be filled by a Type 'A' hydrant. The double-membrane pump is suitable for continuous duty and even dry run operation. Water volume: 1,545 l (optional 2,000 l). Exhaust hood: The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush: Roller brush Ø 406 mm. Roller brush width: 1,275 mm. Suction mouth width: 750 mm. Disc brush: 500 mm (opt. Ø 650 mm). Special equipment sweeper: Auxiliary engine: JCB 55 kW turbocharged, low emission to Stage 5, REQUIRES EN590 (or similar) LOW SULPHUR FUELS. Sweeping units configured for right-hand operation. Final assembly on customer-supplied MB Atego 1324. Pneumatic raising and lowering of the air guide sieve in the dirt container. Pneumatic shaker device for air guide sieve. Chain curtain in dirt container ahead of air guide sieve. Water tank connection coupling Type A, Storz 2 1/2 inch. Dirty water drain screen with graduated perforation mounted on rear door enables efficient... Nsdpfx Aswxn Uasiyscu

Condition: used, Year of construction: 2024, operating hours: 930 h, power: 175 kW (237.93 HP), empty load weight: 16,000 kg, Operating hours: 930, First registration: 23.09.2024 Double-sided dirt collection, towed Basic equipment Controls Main control panel mounted in the center of the cabin with JVM for displaying information on a wide range of sweeper functions plus download capability for recorded data. In addition, the JVM display can show images from up to four cameras. A separate control console with a palm rest for operating main sweeping functions is mounted on the door side. Ncjdpew Ehx Eofx Aiyou Suction blower Variable suction speed from 1,800 rpm to 3,500 rpm to adapt to different applications. V65t: Higher gear ratio: 1.79:1 Disc brush (gutter brush) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cabin). Highly visible signal yellow brush plate and hose routing. Suction mouth Suction mouth made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. 'Pressadrain' water recycling system. EUnited 4-star certificate according to PM10. Electric system 24 V All external wiring harness connections comply with IP67 protection rating. External noise/sound power level LWA 108 dB(A) for standard power engines, measured according to EC directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC directive 2000/14/EC. Sweeping debris container The structure consists of the debris container and integrated water tank. Made from highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side service doors and side storage compartments. A water strainer allows the use of the debris container as a large water tank for street washing. Rear discharge lid, automatic multi-stage debris container support, two protected rear rotating beacons, and LED work lights are standard. Container volume 6.5 m³ Tip angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank with anti-slosh protection can be filled from a Type 'A' hydrant. The double diaphragm pump is suitable for continuous operation and even dry running. Water volume 1,545 l (optional 2,000 l) Exhaust hood The smooth-surfaced exhaust hood is lined with frequency-tuned sound insulation. Brush Roller brush Ø 406 mm Roller brush width 1,275 mm Suction mouth width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Special equipment - Superstructure with hydrostatic drive (V65h) and hydraulic auxiliary drive with HGB2 gearbox - Sweeping assemblies arranged for right-hand operation - Pneumatic lifting and lowering of the air guide screen in the dirt container - Pneumatically operated shaker device for air guide screen - Chain curtain in the dirt container in front of the air guide screen - Water tank connection coupling Type A, Storz 2 1/2 inch - Wastewater drain filter with graduated perforation mounted on the rear door, enables more efficient draining of the dirt compartment (see PI611) - Mounting frame on the rear door for attaching additional equipment - Additional spray nozzles on the rear of the suction mouth (Ni

Condition: used, Year of construction: 2021, operating hours: 2,783 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2783, Battery: Li-ion 63 kWh, Width: 1300, First registration: 02.11.2021, Charger: Integrated 22 kW, self-propelled. Ncedpfxjiwwghe Aiysu Standard equipment of the fully electric CityCat V20e: Cab: Comfortable, sprung-suspended, sound-insulated aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heating blower, sun visors, windshield wipers with washer system. Individually adjustable, sprung driver's seat with headrest and 3-point safety belt. Angle and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C"-profile construction. Independent wheel suspension with shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, as well as front and side brush drives. Brakes: Hydraulic dual-circuit servo brake system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive: Working speed: 0-15 km/h Driving speed: 0-50 km/h *Climbing ability up to 30% Electric drive: 88 kW Electric blower: 8.5 kW Electro-hydraulic unit: 12 kW HV battery: Battery type: Li-ion Battery capacity: 63 kWh Nominal voltage: 335 volts Operating time: up to 10 hours Charging system: Integrated charger: 22 kW Charging connector: Type 2 Charging time: 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control. Hydraulics: Hydraulic unit with low-noise gear pumps for blower, steering, auxiliary functions, as well as front and side brush drives. On-board power supply: 12 V electrical system, battery 95 Ah. Hydraulic dual-circuit servo brake system with disc brakes on front and rear axles, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 tires with 215/75 R16C M+S. Dimensions: Length: 4200 mm Width: 1300 mm Height: 1999 mm Wheelbase: 1900 mm Track width: 1090 mm Sweeping width: 2100 mm Sweeping width with 3rd brush: 2700 mm Special equipment: - Lithium-ion NMC battery, 63 kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic shut-off valve - Third front disc brush - Brush diameter: 800mm, with front arm, swiveling left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment, both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, regeneration and leaf grid - Hydraulic side brush pressure regulation for both side brushes with individual side brush lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Brush speed

Condition: used, Year of construction: 2011, operating hours: 4,500 h, mileage: 134,485 km, empty load weight: 15,000 kg, Operating hours: 4500, First registration: 25.05.2011_____VT 650 Single Year of manufacture 2011 - Kilometers: 134,456 km - Operating hours: 4,260 h - Wheelbase: 3,260 mm - Manual transmission - Sweeping function right - Rear view camera - High pressure system 100 bar/30 L - Spray bar behind suction shaft and high-pressure bar behind the middle sweeping roller - High-pressure lance with 15 meter hose - Convertible to dual operation, storage location: null Ncjdpetrquwofx Aiyju

Condition: used, Year of construction: 2023, operating hours: 777 h, mileage: 22,187 km, empty load weight: 16,000 kg, Operating hours: 777, First registration: 27.09.2023 _____ Engine: PX-76 inline six-cylinder diesel engine, 6.7 liters. Output 194 kW (264 HP) at 2300 rpm. Torque 1000 Nm at 1000-1700 rpm. Version LF 260 FA 4X2 truck, 16t D0555471. Driven rear axle with mechanical differential lock. Brake system: Exhaust brake, integration of function with electronic brake system (EBS). When activated via steering wheel switch, the exhaust brake engages after releasing the accelerator pedal. Emission class: Euro 6. Transmission: Manual gearbox, 6 speeds. Transmission: 6-speed manual gearbox 6S1000 OD, 6.75-0.78. Wheelbase: 3250 mm. Chassis weight: Technically permissible chassis weight 16,000 kg. Cab: Day Cab with steel bumper, tinted windows, and electric window lifters. Electrically heated main mirrors and wide-angle mirrors. Cab width 2130 mm. Exterior sun visor in green above the windshield. Daytime running lights, bumper-mounted lighting units with combined fog lamp and cornering light function. Electric adjustment of main mirrors. Central locking with exterior light checking function, includes 2 remote controls and 2 keys with transmitters. Air-sprung luxury driver's seat with adjustable damping and pneumatic lumbar support. Seat cushion heating, integrated headrest. Three-point seat belt. Velour seat cover. Armrest on driver's seat, manually controlled air conditioning with recirculation function. Communication and driving management: Radio/USB player, two-speaker sound system, truck telephone, hands-free kit with SIM card slot (for 2G or 3G network) and Bluetooth antenna. Multipoint pairing allows simultaneous operation of two additional phones via the steering wheel. Paintwork: Cab color RAL 2011. Standard basic equipment: Hydrostatic transmission HGB2 Max. 1400Nm and approx. 340 HP. Mechanically shifted transfer gearbox with integrated hydrostat for stepless speed control during sweeping operation. Transport driving 0-85 km/h via standard gearbox (cruise control optional). This working drive allows stepless adjustment of sweeping speed forwards (1-40 km/h) and reverse (1-10 km/h) via an electronic accelerator pedal (Easy-Drive). At the same time, suction power can be regulated independently of travel speed between ECO and Max. Fuel tank in sweeper body, approx. 190 l capacity. Hydraulic fan drive. Hydraulic oil tank 50 l. Engine compartment fitted with sound-insulating material, fan exhaust directed upwards through vehicle superstructure, stepless electronic turbine adjustment, single hydraulic pump. Sweeper container: Sweeper container (with tailgate and mesh) and water tank made from 1.4003 stainless steel. Sweeper container gross volume 6.5 m³, container floor from chrome-alloyed stainless steel 1.4301. Sweeper container tipping angle approx. 55 degrees, dirt chute of 1.4003 stainless steel, inspection flaps on right and left, dirty water drain via clamping hose and 2" drain valve, air guide mesh manually foldable, 2 amber beacon lights at rear on KGB, suction pipe flap mounted externally on container, hydraulically operated, 4-stage... Ncodox S Tp Aopfx Aiyeu

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, first registration: 06/23/2016, self-propelled. Standard basic equipment: Fan unit - fan drive hydraulically via the auxiliary drive located on the chassis, independent of the transmission (semi-hydrostatic drive) - hydraulic fan drive - hydraulic oil tank 50 l - engine compartment with noise-reducing material - fan exhaust duct leading upwards through the container front - hydraulic pump, single sweeping material container - sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel - engine compartment cladding made of normal steel - sweeping material container gross volume 6.5 m³ - sweeping material container floor made of chromium alloy stainless steel, 1.4301 - sweeping material container tilting angle approx. 55 degrees - dirt chute made of chromium steel, 1.4003 - inspection flap on the right and left - dirt water drain 4", A-coupling - air intake screen, manually foldable - 2 rear warning lights on the sweeping material container - air shut-off on the suction hose, pneumatically operated - multi-stage locking support, pneumatically operated - marker lights on the container rear, side marker lights - integrated water tank - preparation for rear suction hose boom or mounted on the roof - side marker lights. Sweeping material intake: Sweeping material intake, wear-resistant coating - coarse intake by tilting the suction nozzle - suction hose diameter 250 mm - disc brush, pushed - hydraulically driven disc brush, steel - disc brush, steel, diameter 500 mm, pulled - stepless speed control for disc brush - two robust, pivoting trailing wheels - automatic lifting of the sweeping units when reversing - work lights for sweeping unit. Roller brush: Roller brush suspension, pulled - brush length 1,300 mm, brush diameter 406 mm with plastic trim (chassis-dependent) - hydraulically driven roller brush - throw limitation apron for roller brush unit. Water system: Water tank volume approx. 1,554 l - water container made of chromium steel, 1.4003 with coating - water level indicator in the driver's cab - water filling device, Storz C (2"), right - manual water filling device, right and left - water pump, hydraulically driven - automatic water stop when the sweeping units are lifted - spray water connection, 3/4", rear right - water blowing system - electric water valves in the driver's cab - 2-jet nozzle bar, low pressure, front. Instrument panel and control panel: Bucher instrument panel, incl. 7" color display - ergonomic control unit, mounted on the driver's door, equipped with the main functions - display includes the following functions: water level indicator, operating hours and rear axle load - warning and control lights for rear axle load - control and regulation unit for regulating the brush pressure (brush relief), stepless speed control of the disc brushes - electric valves for water system, operation in the driver's cab - operation of the dirt container functions by means of a cable remote control from the driver's cab, but also possible from the outside - operation of the air intake screen, operation on the rear right of the vehicle - overload indicator for rear axle load, warning light in the display (optional). Ncjdpfx Ajfy Am Ujiyou

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Nsdpfxsu Ay Tzs Aiyocu Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Nsdpfetuzqpsx Aiyscu Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm

Condition: used, Year of construction: 2023, operating hours: 893 h, power: 62 kW (84.30 HP), empty load weight: 4,500 kg, Operating hours: 893, First registration: 29/09/2023 Ncjdpfxew Ehxxj Aiysu Sweeper Bucher C202 Euro 6C with VM engine, Euro 6C certified, featuring integrated diesel particulate filter, SCR catalyst, and AdBlue. Standard configuration with 2 side brushes, front steering (2-wheel steered), speed 50 km/h. Equipment: - Right-hand drive - All-wheel steering – offers high maneuverability and safety - RAL 9016 white - Rotatable 125 mm leaf suction hose - Coarse dirt / leaf flap - Prepared for 3rd front brush and/or winter service equipment (right-hand drive) without front equipment triangle - Includes work lights - Additional mirror inside the cab to improve blind spot visibility - Protective grid on cab floor - Exterior mirrors, heated - Rear view camera, color - DAB+ radio with CD, USB, Bluetooth - Deluxe driver’s seat with headrest, lumbar support, and seat heating - Automatic climate control – fully integrated heating and air conditioning system - Electric battery master switch - LED beacons in front, behind the cab - LED warning flashers, front (2 pcs) - Manual water valves for the brush arms - High-pressure system 68 bar, 9 l/min with 10 m hose and hand lance - Water level / water loss indicator for fresh water - Label 99dB Location: State Office for Fire-

Condition: used, Year of construction: 2016, operating hours: 3,656 h, fuel type: diesel, color: white, empty load weight: 4,000 kg, next inspection (TÜV): 08/2020, front tire size: 0%, rear tire size: 0%, Operating hours: 3656, first registered: March 22, 2016, self-propelled_____Equipment: - Right-hand drive - All-wheel steering (turning circle diameter 3760 mm) - Coarse dirt flap - Poly/steel brushes (instead of standard) - Suction nozzle with castors (instead of standard) - Mounting plate: preparation for 3rd brush - Low water level indicator - Adjustable water valves on the front brushes - Deluxe driver's seat, heated with lumbar support - Radio extension with Bluetooth (hands-free phone) - Blind spot mirror - Heated rear view mirror left/right - Additional 99 dB (A) TÜV approval - Rear view camera system with integrated 7.0" color monitor - RKL, foldable, yellow LED (instead of standard) - High work lights, Storage location: 54595 Prüm Nodpfxelz Iu Ue Aiyscu

Condition: used, Year of construction: 2022, operating hours: 1,250 h, mileage: 27,235 km, empty load weight: 16,000 kg, Operating hours: 1250, First registration: 24.02.2023 Application: - Maximum gross weight: 16 t - Prepared for sweeper body Main components: - Chassis height: MED (medium) - Standard cab - Wheelbase: 3350 mm - Euro 6 emission standard - Diesel engine, 6 cylinders, 7.7 l, 257 hp / 188 kW, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Transmission ZTO1006, 6-speed manual (OD) - Drive axle ratio: 5.13 Equipment packages: - Manual roof hatch - Side sun visor, driver side - Manual air conditioning - Cruise control - DAB audio system, DAB/FM/AM radio, antenna, Bluetooth connectivity, USB, 2 speakers Chassis: - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t - AdBlue tank: 32 liters Wheels and tires: - Front tires: 285/70 R 19.5 Goodyear KMAX S - Rear tires: 285/70 R 19.5 Goodyear KMAX D Drivetrain – equipment: - High-level air intake, installed on bracket right behind cab Cab interior: - Right-hand drive - Heated comfort driver's seat with integrated seatbelt Nsdpovt Iytofx Aiyocu - Basic passenger seat - One armrest for driver - Coat hook on rear wall - Forward collision warning with emergency braking (for stationary and moving objects) - Lane departure warning system - Immobiliser, transponder in key - Electric windows on both sides - Reverse alarm - Speed limiter 90 km/h - Metal roof hatch - Steering wheel adjustable in two directions Cab exterior: - Tinted windows - Rear cab wall window - Central locking with remote control - Heated and electrically adjustable rearview mirrors - External sun visor - Headlights with beam adjustment - LED daytime running lights, "V Light" Double-sided dirt intake Body with hydrostatic drive and hydraulic auxiliary drive with HGB2 transmission (V50h/V65h) Engine power: 256 hp / 188 kW (187.9 kW) Application: - Maximum gross weight: 16 t - Sweeper preparation - Diesel engine, 6 cylinders, 7.7 l, 969 Nm - Exhaust and compression brake, 170 kW / 231 hp - Bluetooth phone integration, USB, 2 speakers - Technical max. front axle load: 5.8 t - Technical max. rear axle load: 10.9 t - Collision warning with emergency braking (stationary and moving obstacles) - External sun visor - LED daytime running lights, "V Light" Standard basic equipment: - Hydrostatic gearbox HGB2 - Max. 1400 Nm and approx. 340 hp - Mechanically switching gearbox integrated into chassis with built-in hydrostat for stepless speed control in sweeping mode - Transport speed 0 - 85 km/h via standard transmission (cruise control optional) - This work drive allows stepless control of sweeping speed forward (1 - 40 km/h) and reverse (1 - 10 km/h) via electronic accelerator pedal (Easy-Drive) - Suction power can be regulated independently of travel speed between ECO and MAX - Fuel tank in sweeper body, approx. 190 l capacity - Hydraulic fan drive - Hydraulic oil tank 50 l - Engine compartment fitted with sound insulation - Fan exhaust routing upwards through container superstructure - Stepless electronic tur...

Condition: used, Year of construction: 2022, operating hours: 1,018 h, power: 62 kW (84.30 HP), color: white, empty load weight: 3,500 kg, Operating hours: 1018, Engine manufacturer: VM-Motor, First registration: 28.09.2023 Equipment: Sweeper vehicle Bucher-Johnston CX 202 Euro 6 VM engine, Euro 6 certified with integrated diesel particulate filter, SCR catalyst, and AdBlue Standard configuration 2 side brushes, front steering (2-wheel steering) Special equipment: Right-hand drive, RAL9016 white Coarse dirt/leaf flap Shut-off valve for return water from the debris container Air conditioning, CFC-free Large brush mirror for improved visibility of the sweeping area digital tachograph Ncedpfx Aijuqtfloyeu Heated exterior mirrors Radio DAB+ with CD (brand: Alpine, model: CDE-205DAB), MP3, front AUX, USB, Bluetooth, microphone Deluxe driver’s seat with headrest incl. seat heating 50 km/h LED warning beacon at the front behind the cab Manual water valves for the brush arms Storage location: ESO City Services

Condition: used, Year of construction: 2022, operating hours: 1,249 h, mileage: 9,200 km, empty load weight: 16,000 kg, Operating hours: 1249, Initial registration: 03/13/2023_____Engine power: 256 hp / 188 kW (187.9 kW)Application: Maximum total weight 16 t - Sweeper unit preparationMain components:- Standard cab- Wheelbase 3350 mm- Euro 6 emission standard- Diesel engine, 6 cylinders, 7.7 l, 969 Nm- Exhaust and compression brake, 170 kW/231 hp- Transmission ZTO1006, 6-speed manual, overdrive- Drive axle ratio 5.13Equipment packages:- Manual sunroof- Side sun visor, driver's side- Manual air conditioning- Cruise control- Audio system DAB, radio DAB/FM/MW, antenna, Bluetooth telephone connection, USB, 2 speakersChassis:- Front axle load (technical) max. 5.8 t- Rear axle load (technical) max. 10.9 t- AdBlue tank 32 litersWheels and tires:- Front tires, 285/70 R 19.5- Goodyear, KMAX S- Rear tires, 285/70 R 19.5- Goodyear, KMAX DDrive train - Equipment:- High air intake, mounted on bracket on the right side behind the cabCab - Interior:- Right-hand drive- Comfort driver's seat, heated, seatbelt integrated in the seat- Basic passenger seat- One armrest, driver's side- Coat hook on the rear wall- Collision warning with emergency braking function (stationary and moving objects)- Lane keeping system/lane departure warning- Immobilizer, transponder in the key- Electric windows on both sides- Reversing alarm- Speed limiter 90 km/h- Metal sunroof- Steering wheel, adjustable in two directionsCab - Exterior:- Tinted windows- Window in the rear wall of the cab- Central locking with remote control- Rear-view mirrors, heated and electrically adjustable- Exterior sun visor- Headlights with beam angle adjustment- Daytime running lights LED, "V light"Standard features:Hydrostatic transmission HGB2Max. 1400 Nm and approx. 340 hpMechanical transmission integrated into the chassis with integrated hydrostatic system for stepless speed control during sweeping operationTransport speed 0 - 85 km/h via standard transmission (cruise control optional)This working unit allows stepless control of the sweeping speed forward (1 - 40 km/h) and backward (1-10 km/h) via an electronic accelerator pedal (Easy-Drive).At the same time, the suction power can be regulated independently of the driving speed between ECO and Max. Fuel tank in the sweeping superstructure, capacity approx. 190 lHydraulic fan drive. Hydraulic oil tank 50 l, engine compartment with noise-reducing material, fan exhaust duct leading upwards through the container extension, stepless electronic turbine adjustment, hydraulic pump, single.Sweeping material container:Sweeping material container (with rear flap and screen) and water tank made of 1.4003 chromium steel. Sweeping material container gross volume 6.5 m³, sweeping material container floor made of chromium-nickel stainless steel 1.4301. Sweeping material container tilting angle approx. 55 degrees, dirt slide made of chromium steel 1.4003, inspection flap on the right and leftDirty water drain via clamp hose and 2" drain valve, air guide screen, manually foldable, 2 flashing beacons orange, rear on the sweeping material container, suction pipe flap on the outside of the container, hydraulically operated, 4-stage locking support, pneumatically operated.Marker lights on the rear of the container, side marker lights.Sweeping unit: Ncjdpfx Aovacl Dsiysu

Condition: good (used), Year of construction: 2007, I will sell a feeder for salt, feed, etc. Nodpfx Aiov A Rqmeyecu