Used Gannomat / Ganner Carcase Press for sale (12,420)

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. Hfedpfx Aoy Egz Seagog - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames Hfjdpfxjxdttie Aagog • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: reconditioned (used), Year of construction: 2007, Connection 220V, compressed air connection 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory feeder, automatic dowel length and diameter control, fully automatic electronic control system, rinsing-gluing-gluing+driving in, rotary switch for glue/water to rinse, glue residue indicator, stainless steel container for glue, stainless steel container for water, 1x gun for dowels with diameter 8 mm length 20-50 mm, operating instructions - Hfjdowrruqopfx Aagog

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and Hfedpfx Aoumw Sbjageg hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion Hfedpfx Aajvxgm Njgeg • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Hfsdjw Nafkopfx Aageg Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Hodpfxsvvkl Dj Aagefg Storage location: Nattheim

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: Flexible, pneumatic press with very short setup times Hedpjy Ih Ryjfx Aagefg The press consists of a sturdy press frame, a smoothly movable press carriage, and horizontal and vertical press jaws. All controls are conveniently accessible. The MPH 100 achieves a clamping effect of the press carriage when pressing – similar to a screw clamp. - Equipped with 3 vertical press jaws - Equipped with 2 horizontal press jaws - Cabinet length: 380 - 2500 mm - Cabinet depth: max. 600 mm - Cabinet height: 350 - 1200 mm - Pressing force: 3.6 kN / press jaw - Working height: 600 mm - Weight: 1.1 t - Operating pressure: 6 bar Availability: short-term Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Hodoxu Egvepfx Aagofg Weight approx. 900 kg

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 211/91/1, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 750 mm, table length: 2,700 mm, total length: 3,650 mm, total width: 850 mm, total height: 2,300 mm, overall weight: 2,200 kg, lifting height: 1,350 mm, working width: 750 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, workpiece height (max.): 1,300 mm, height adjustment type: electric, space requirement height: 2,300 mm, space requirement length: 3,650 mm, space requirement width: 950 mm, working length: 2,500 mm, - Lamella - carcass press - Working area: Hjdpjyx Habsfx Aagjfg - Width from 150 - 2,500 mm, height from 150 - 1,300 mm; depth 750 mm; - 2,200 daN (kg) - The pressing force is adjustable to 85% + 70%. - Very robust machine

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Hsdoxgvwpepfx Aagefg Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: good (used), Code: 0278 Brand: COMIL BIESSE Model: COSMO Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Hfsdpfxeyyzvgj Aagjg Working height mm 1200 Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Hfodew Sgnkepfx Aageg Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Hodpfx Aoiidm Neagefg Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Hfedpfevv Ul Ujx Aageg Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) Hodpfx Aajvxgrrjgsfg • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Gannomat Mod. 260 carcass press Hfjdsrfbnbspfx Aagjg Clamping size 2500 x 1250 x 650 mm Working pressure 0 - 10 bar Cylinder stroke 110 mm Space requirement 3240 x 2120 x770 mm Weight 900 kg Year of construction 2010 CE conform The machine is still being refurbished and more pictures will follow shortly

Condition: new, Year of construction: 2026, CNC bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic CNC controlled drilling and insertion machines. Short introduction: • CNC controlled hinge boring and inserter for high capacity • Flexibility through the CNC control • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor Hodpfxsdx A U Hs Aagsfg • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2026, Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines. Short introduction: • Single and multi hinge boring and inserter for high capacity • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option) Hedpsdx A U Djfx Aagjfg

Condition: new, Year of construction: 2026, Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines. Short introduction: • Single and multi hinge boring and inserter for high capacity • Massive and robust drilling units • Inserting die made of steel for a long life time use Hedpfxsdx A Urj Aagefg • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Hfodpsvdbv Aefx Aagsg Roller width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction Hodpjhwwnrofx Aagjfg

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, pressing force: 120 t, total length: 100,000 mm, total width: 1,000 mm, total height: 2,600 mm, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Hsdpfxeqai H Tj Aagjfg Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: excellent (used), Gannomat slot mortising machine / dowel drilling machine with Leroy-Somer motor - Motor type: LS80L2 - Power: 1.1 kW - Speed: 2810 rpm - Voltage: 220/380 V - Frequency: 50 Hz - Protection class: IP54 3-phase drive - Stable work table - Precision guide rails - Adjustable stops - Robust metal construction Hodpfey Saw Hox Aagsfg - Ideal for series production and precise wood joints – with drill and cup cutter - Air pressure must be shut off manually

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm Hsdpfxevuukno Aagjfg capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication