Used Göpel Automated Optical Inspection Machine for sale (84,697)

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Lredpfx Abstz Dkyoysu

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Lsdpfx Abezrg T Eeyeru Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Lrsdpfx Aowb E Sbobyeu

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system Lrjdpfx Ajzii Dhebyou CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2003, condition: good (used), functionality: fully functional, X-TEK RTR160UF: X-TEK Systems Ltd., England Model: RTR160UF Type: Ultra Focus X-Ray System Max. X-ray voltage: 160 kV Max. power: 60 W Focus size: 5 (Ultra Focus) Manipulator: 50 kg, 5 axes Power supply: 230 VAC, 50/60 Hz Serial number: RTR/124 Model: RTR160UF Ledpjzl Scrjfx Abyjru X-ray source: 160 kV, 60 W, 5 m Ultra Focus Manipulator: 50 kg, 5-axis Serial No.: RTR/124 Supply: 230 VAC, 50/60 Hz Specified cabinet leakage: < 1.0 Sv/hr at any point on the cabinet surface under the stated test conditions. This is an industrial cabinet X-ray inspection system, designed for high-resolution non-destructive testing (NDT) of components, electronics, castings, solder joints, and similar items. The 5 m ultra-focus source is intended for very high-resolution imaging.

Condition: excellent (used), Automatic machine with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3mm such as boxes, linen, reams of paper, magazines, leaflets. In production up to 23.09.2026 Lsdpfsz D Uguex Abyjru Price € 7,995.00 Quantity 2 machines available Shipping can be arranged for the buyer

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 919, power of the servo motor: 750 W, input voltage: 400 V, type of input current: three-phase, feed length X-axis: 150 mm, feed length Y-axis: 100 mm, 8 C – JAM TC 138-EP-FC Automatic Pocket Setter with Brother Sewing Head (2001) CNC Controlled Automatic Pocket Setting Workstation for Jeans & Workwear Production Professional-grade JAM TC 138-EP-FC Automatic Pocket Setter equipped with a high-performance Brother automated sewing system. Manufactured by JAM s.r.l. (Italy), this fully integrated workstation is designed for automated folding and stitching of patch pockets used in jeans, workwear, jackets, and other garment applications requiring high productivity and repeatable quality. The machine combines programmable CNC-controlled sewing, automated pneumatic material handling, precision folding templates, and automatic positioning technology. The system is capable of folding and sewing pocket components with minimal operator intervention while maintaining consistent quality throughout long production runs. The unit was previously used in professional garment manufacturing and remained operational until factory shutdown. Technical Specifications • Manufacturer: JAM s.r.l. • Model: TC 138-EP-FC • Year of Manufacture: 2001 • Machine Number (Matricola): 919 • Reference Number: 8 C • Sewing Head: Brother Automated Sewing Unit • Control System: Brother BAS CNC Controller • Automation Platform: JAM System • Servo Motor Power: 750 W • Power Supply: 400 V, 3-Phase • Frequency: 50/60 Hz • Motor Speed: o 1390 rpm (50 Hz) o 1680 rpm (60 Hz) • X-Axis Feed Length: 150 mm • Y-Axis Feed Length: 100 mm • Pneumatic Supply Required Key Features • Fully automated pocket setting workstation • CNC-controlled programmable sewing system • Automated pocket folding and positioning • Pneumatic clamping and material handling • Fast pattern change capability • High repeatability and consistent stitch quality • Designed for continuous industrial production • Heavy-duty Italian automation platform • Integrated Brother sewing technology • Suitable for denim, workwear, and garment manufacturing Includes • JAM TC 138-EP-FC automated pocket setter • Brother automated sewing head • Brother BAS CNC control system • Dual control panel interface • Integrated pneumatic clamping system • Automated fabric handling system • Pocket folding templates and guides • Stainless steel workstation table • Industrial steel frame • Safety guards • Integrated workstation lighting • Pneumatic components and connections Applications • Automatic patch pocket attachment • Jeans pocket setting • Workwear pocket production • Chino and trouser pocket attachment • Garment component sewing • Reinforcement stitching • Label attachment operations • High-volume apparel manufacturing Condition • Fully functional • Operational prior to factory shutdown • Serviced on 27.02.2026 • Good industrial condition • Normal cosmetic wear consistent with production use • Available for inspection before dismantling Lrodpfszgw Ebsx Abyju Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's CNC control system, pneumatic components, and calibration requirements. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Lrsdpfxjz D Uans Abyou Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery

Condition: used, Year of construction: 2007, operating hours: 14,700 h, machine/vehicle number: ET194, Labeling machine for sale with optical centering 6000 bphTechnical Specifications & Performance DataThis P.E. Labellers rotary adhesive labeler with optical centering is engineered for precision bottle decoration within a used bottling line or new installations. Built for consistent, high-quality labeling across beverage production environments, it balances speed with accuracy and repeatability.Manufacturer / Model: P.E. Labellers – 8T 4S 4E adhesive SL GlueYear of manufacture: 2007Production speed: up to 6,500 bottles per hour (bph)Stations / Plates: 4 adhesive stations; 8 motorized plates with dedicated photocellsOptical centering: Advanced system for precise label alignment on decorated, embossed, or irregular bottlesLabeling applications: Body, back, neck and optional L-/U-seal for caps (via dedicated adhesive unit on trolley)Container types: PET and glass bottles; adaptable for other rigid containers (e.g., aluminum) with appropriate format partsProducts: Suitable for water, juice, beer, wine, spirits, soft drinks, and moreDimensions (WxLxH): 2000 x 2900 x 2500 mmWeight: 2100 kgElectrical requirements: 380 V, 50 Hz, 5 kWConfiguration codes (OEM): No. of plates: 8; Rotation direction: 1; Plate movement: 2; Number of stations: 4; Labeling method: 0,4; Label placement: 0,1,2,4; Optical centering system: 2; Head adjustment: 1Advanced Automation & Control SystemsAutomation is designed for reliable, repeatable labeling within industrial packaging lines. A touchscreen HMI and integrated PLC control all machine functions, offering recipe-based changeovers and real-time diagnostics. Servo-driven or motorized plates work in concert with photocells for synchronous optical centering, supporting premium presentation at full speed.Touchscreen HMI with programmable recipes (memory for multiple label formats)Integrated PLC and modern electronics; inverter-driven speed modulationElectric lift for quick height adjustment of the carousel and heads4-axis head adjustment on trolley for precise head positioningPhotocell-controlled label application synchronized with optical centeringManuals available for operation, maintenance, and programmingProduction Line Integration CapabilitiesEngineered to integrate seamlessly upstream and downstream with rinsing, filling, and capping machines, as well as inspection systems, coders/inkjets, and secondary packaging (shrink, wrap-around, or case packing). This second hand labeler is ideal for upgrading or completing a used bottling line without compromising performance.Compatible with standard conveyors, accumulation tables, and line controlsFast format changes supported by stored recipes and mechanical referencesMulti-format flexibility for different bottle heights and diameters with the right format setsInterfaces available for line start/stop and speed cascade with fillin... Ljdpfjvlnvrox Abysru

Condition: excellent (used), Year of construction: 2017, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: 7846, travel distance X-axis: 455 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 800 kg, total height: 2,600 mm, total width: 2,160 mm, total length: 2,600 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 450 mm, table length: 820 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 2,800 kg, table load: 800 kg, input frequency: 50 Hz, Equipment: documentation/manual, EDM312MF30 + AWEX100/5 100 electrode positions 5 pallet positions 320x320mm Operating hours 12,300h Technical data: Travel ranges: 455x300x300mm Workpiece table 820x400mm Tank size 900x520mm Filling height 300mm Distance table/electrode holder 150/450mm Workpiece weight max. 800kg Dielectric fluid max. 700l Dimensions WxDxH 2160x2000x2610mm Machine weight 2500kg Mains connection 3/N/PE 400/230 50Hz Power consumption 6.7 kVA Equipment: Color: Light/Gray Control interface MF30 V3.2 Touch screen display Generator, exogenous 60A Direct measuring system in all axes Lodpfx Aboz I Symeyjru Cartridge filter Cooling unit integrated CO2 extinguishing system C-axis 100/min., holding brake Manual control panel with accept button Lowering tank, automatic positioning Chuck Erowa Warranty 12 months Transport Commissioning on site Training

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles Lsdpfxotnf Iyo Abyoru APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Lrsdpfx Ajzd Rmgsbysu Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, Year of construction: 2021, New 4 Head Automatic Capper & Cap Feeder Never Used / New Lrjdjv R I D Hepfx Abyju Model RCP-141 To include Capper Feeder & automatic capper machine

Condition: used, This listing is for a Quickpouch Automated Form-Fill Seal Packaging Machine with Videojet Dataflex Printer for Quickpouch Auto loader. Ledpfxoxzg Hqs Abysru Manuals are available on request.

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% Ljdpfsurhx Nsx Abyoru -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: ready for operation (used), Year of construction: 2007, A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production line has all necessary peripheral equipment such as filter systems, chip conveyors and coolant supply systems from the manufacturers Knoll and Hyfra. Documentation available. An on-site inspection is possible. Lsdpfsy Ey Tuex Abyjru

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Lrsdpfx Abjzrt Uieysu Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Annual service by Kaste

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Lodeu Itlnspfx Abysru Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: used, Grinding spindle drive: 0.5HP, drive: Vibration-damped electric motor, power transmission: Endless woven flat belt, grinding carriage oscillation rate: 55 or 109 strokes/min, continuously adjustable oscillation stroke: 0-3⅛in, max. oscillation stroke: 79.375mm, pantograph ratio: 50:1, profile reduction: Factor 50, lateral clearance angle: ±10°, front clearance angle: 0-35°, an on-site inspection is possible. Lrjdpo Adt Hgefx Abyju

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: YAM0035, power of the servo motor: 1,200 W, input voltage: 230 V, clearance between the columns: 80 mm, type of input current: AC, throat depth: 150 mm, feed length X-axis: 30 mm, feed length Y-axis: 85 mm, feed length Z-axis: 12 mm, pneumatic connection: 10 bar, AMF REECE ATLAS Mark IV Automated Waistband Machine (2020) Modern High-Speed Production System – Video Ready Category Description For sale is an AMF Reece Atlas Mark IV automated industrial sewing unit, manufactured in 2020. This is a modern programmable production system designed for high-precision and repeatable garment component manufacturing. This is not a standard sewing machine but a fully automated unit capable of executing pre-programmed sewing cycles with high accuracy and consistent quality. The machine has been used in a professional garment production environment and is offered as a complete industrial workstation. Year 2020 Modern digital control system Production-ready configuration Key advantages Modern generation machine with low mechanical wear Fully programmable sewing operations High repeatability and precision Suitable for continuous industrial use European-built unit with strong parts availability Key features Programmable automated sewing cycles Integrated touchscreen control interface Pneumatic-assisted operation High precision stitch control Stable heavy-duty construction (Kessler base) Designed for continuous production environments Fast changeover between sewing programs Includes AMF Reece Atlas Mark IV machine unit Integrated control system with touchscreen Pneumatic components Industrial table and Kessler base Thread holders Technical details Manufacturer: AMF Reece Model: Atlas Mark IV Year: 2020 Serial number: YAM0035 Power supply: 230 V, 1-phase, 50/60 Hz Power output: 1.2 kW Current: 8 A Origin: Czech Republic CE marked Pneumatics required Condition Used industrial condition From professional production environment Ljdsy Nd Ukspfx Abyoru Typical signs of use Sold as-is, where-is, without warranty Inspection possible before purchase Applications Belt loop operations Pocket attachment Denim component sewing Workwear production Automated garment part manufacturing Repetitive precision sewing operations Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Lrodpezq Df Nefx Abyju Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: used, Year of construction: 2004, functionality: fully functional, Well used Sunnen honing machine with Felsomat loading system. Diameter range (INSIDE Ø)¹: Krossgrinding® tools: 5.46 to 32 mm when loaded with CGT tools TurboHone® tools: 3.81 to 32 mm when loaded with MMT tools Lredeud Nm Ropfx Abyju Connecting rod tools: 53.8 to 63.8 mm when fitted with CRT tools Larger tools: 25.4 to 101.6 mm Workpiece²: 8 to 150 mm Max. Workpiece weight: 2.0 kg Spindle speed range: 250 to 3,700 rpm, adjustable Standard speed: High torque in the low speed range: 20 to 1,000 rpm, adjustable Stroke speed range: 33 to 500 H/min, adjustable Coolant system Pump motor: 0.18 kW Coolant pump: 5.6 l/min Coolant capacity: 132 l and 11.2 l/min Coolant requirements: Compressed air requirements: 566 l/min at 4.48 bar, 5.52 bar is recommended Temperature range: 0° to 35° C Floor space requirements: (concrete floor) At least 150 mm thick Machine dimensions: L 2946 mm x W 2971 x H 1829 Color: Pearl grey with pewter grey and burgundy decorative stripes Stand weight: 1,579 kg Noise emissions: < 71 dB (A) continuous load, < 75 dB (A) peak load Special features: Automatic set-up: spindle speed, stroke speed, stroke length, infeed value and sparking Automatic finishing: Standard Machine operating modes Automatic: Manual: Series production Individual production Clamping optional

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Ledpsuanrwefx Abyoru

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic carton sealing machine with label printing | 220V | NEW Description For sale is a new automatic carton sealing and labeling machine for professional use in shipping, logistics, e-commerce, fulfillment, and production. The system combines automatic carton sealing with adhesive tape with an integrated real-time label printing system. This allows cartons to be sealed and then labeled with individually generated labels within a single process. According to the manufacturer, the integrated thermal printing system supports barcodes, dates, logos, and other variable label information. Ideal for companies with regular package and carton shipping, as well as for integration into existing packaging and conveyor systems. Technical data according to the manufacturer: Ledezwch Nopfx Abyjru Capacity: approx. 800–1,000 cartons/hour Carton length: from 130 mm Carton width: 80–300 mm Carton height: 90–400 mm Adhesive tape width: 30–50 mm Power supply: AC 220 V / 50 Hz Power consumption: 1.83 kW Machine dimensions: approx. 2,400 × 800 × 1,680 mm Machine weight: approx. 180 kg Operating temperature: –10 °C to +50 °C Features / Functions Automatic carton sealing Sealing of top and bottom Integrated labeling system Real-time label printing Support for barcodes, date, logos, and other information Touchscreen operation Adjustable parameters Status and error display Roller conveyor technology Suitable for different carton sizes Suitable for integration into automated packaging processes Typical applications Mail-order business, e-commerce, fulfillment centers, warehouses and logistics, production facilities, packaging companies, and industrial end-of-line packaging. The machine is particularly suitable for companies that want to automate carton sealing and labeling in a single process. Condition: New Scope of supply and delivery time: upon request. If you are interested or have technical questions, please send us a message. We will also be happy to assist you with the planning of other packaging machines and automation solutions. Note: Technical specifications are based on the manufacturer's documents. Images may show optional equipment. Subject to technical changes and errors.

Year of construction: 2023, condition: ready for operation (used), Automatic 3D XRAY with laser option for Z reference, without calibration plate from 01/2023 with 1500 h. Ljdpfjzuwwyex Abyoru