Used Fliegl Tandem Platform Trailer for sale (20,309)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21201011210, empty load weight: 3,420 kg, maximum load weight: 8,380 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 60 %, Year of construction: 2021, Please note: the images are archive photos. The vehicle may currently be in use! # Chassis – centre-axle trailer - Fine-grain steel welded construction, "10-year warranty against rust-through" - Outer frame slightly inclined with "Load-Lock-Profil" for attaching lashing straps - Gear-driven landing leg at front, folding rear support, side door stays - Steel rear underrun protection, rear corner impact protection - 1 spare wheel carrier for 1 spare wheel, with wheel fixing kit - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with padlock (padlock not included) - Without ramps - Platform height 1080 mm – observe overall height! # Towing device – centre-axle trailer - Drawbar with certified 40 mm towing eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - No drawbar length adjustment # Axles + suspension - BPW drum brake axles, air suspension - Axles/running gear laser-aligned – reduces tyre wear and fuel consumption # Braking system - Dual-line compressed-air braking system, colour-coded lines for easy servicing - Spring-brake parking brake - Duomatic connection at front, with connecting line to towing vehicle - EBS with EBS connector at front, with connecting cable - Caution: the trailer may only be towed by vehicles ensuring the effectiveness of the ABS! - Raise/lower valve, vehicle stability system # Wheels and tyres - 235/75 R17.5, make at manufacturer's discretion, steel rims factory silver # Electrics - 24 V, multi-chamber lamps, yellow LED side lighting - 2 white front position lamps, 2 white/red outline marker lights at rear - 1 x 15-pin connector at front, with connecting cable # Floor - Film-faced plywood approx. 30 mm, for high point loads - Floor rated for forklift loads up to 2900 kg - Platform length approx. 7300 mm # Front wall / front corner posts - Through-loading system with front portal doors, double-leaf, each with 2 internal cam-bar locks - Steel corner posts, release device for side curtain - Bridge plate approx. 2400 mm wide, divided once, approx. 350 mm long to rest on tail lift, capacity approx. 1800 kg, incl. tail lift support - (Drawbar length then approx. 2100 mm; for 1800 mm tail lift, truck coupling set-back min. 20 to max. 240 mm) # Centre stanchions - 1 pair of sliding stanchions, movable over full length, with fourfold slat pockets and long pocket at bottom - 1 pair of fixed stanchion positions Kedpfjz R Afyox Akpjdu # Insert slats - 5 rows of aluminium V-slats # Rear wall / rear corner posts - Steel rear corner posts up to roof underside - Curtain attachment with round tube, curtain tensioning ratchet - Rear portal doors, double-leaf, each with 2 internal cam-bar locks # Curtain - Welded-in horizontal and vertical straps, stainless steel tensioning buckles # Roof - Sliding roof, slides from rear to front - Rear end carriage folds upwards - Curtain colour: white - Optimised rain gutter at rear, on top of rear bow above doors # Country of registration / plates - Germany, with DEKRA inspection and expert report (acc. to §13 EG-FGV) - 24/7 service hotline - Fliegl manufacturer's certificate for body strength acc. to EN 12642 XL - Prepared for single-line number plate holder - White reflective strips: along bottom of side curtains and at top corners - Red reflective strips: around rear portal

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: tail-lift, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, centre-axle trailer - Outer frame, slightly angled, new design with "Load-Lock-Profil" for lashing strap attachment - 2-speed landing leg, front - Plastic toolbox - Platform height 1080 mm - Drawbar coupling, centre-axle trailer - Drawbar with tested 40 mm drawbar eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - Drawbar mechanically length-adjustable from approx. 1950-2300 mm, lockable in approx. 50 mm increments, drawbar length set to approx. 2100 mm #Axles + suspension - SAF/BPW axles, manufacturer's choice - Axles/running gear laser-aligned, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Spring-loaded parking brake - Duomatic coupling head, front, with connecting line to the towing vehicle - 24-volt EBS, electronic braking system with EBS connector, front, with connecting cable - With lifting & lowering valve - Vehicle driving stability system #Wheels and tyres - 4x 235/75 R17.5, manufacturer's choice - 4x steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED lighting on the sides - 2 white position lights, front Kdedpezcp E Tofx Akpju - 2 white/red outline marker lights, rear - 1x 15-pin plug, front, with connecting cable #Floor - Screen-printed plywood flooring, approx. 30 mm thick, for high point load capacity - Platform length approx. 7,300 mm #Front wall / front corner posts - Pass-through loading system with front barn doors, 2-leaf, each with 2 internal rod locks, steel corner posts, release mechanism for side curtain - Loading ramp flap, approx. 2,400 mm wide, split once, approx. 350 mm long, for resting on the tail lift, load capacity approx. 1,800 kg, incl. support for the tail lift (drawbar length then approx. 2100 mm; for a tail lift length of 1800 mm, the coupling set-back dimension from the truck must then be min. 20 to max. 240 mm). Note! Usable internal length is reduced by the loading ramp flap! - Side boards #Centre stanchions - 2 pairs of sliding stanchions, adjustable along the full length, with 4 insertion pockets each and a long pocket at the bottom - Insert slats - 5 rows of wooden insert slats (4 rows in combination with side boards) #Rear wall / rear corner posts - Rear corner posts, steel, up to the underside of the roof, tarpaulin attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Tensioning buckles made of stainless steel - Customer lettering possible on side curtains and rear doors #Roof - Sliding roof cover, rear end bow lifts up, cover slides from rear to front, tarpaulin colour: white - Optimised rain strip at the rear, at the top of the end bow, above the doors #Country of registration / plates - Germany - With DEKRA inspection and certification (in accordance with §13 EC-FGV) - Fliegl manufacturer's certificate for body strength to EN 12642 XL - Prepared for single-line number plate holder - Reflective strips: white, continuous along the bottom of the side curtains and at the top corners - Reflective strips: red, all around the rear doors - Bespoke transport solution

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/2016, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, total length: 9,000 mm, total width: 2,480 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 6,750 mm, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Make axles: BPW Brakes: disc brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Kdsdpfx Asz R Nb Aokpju Empty weight: 3.150 kg Carrying capacity: 14.850 kg GVW: 18.000 kg Functional Make of bodywork: Booi Carrosserie Plywood BDF Box History Number of owners: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,520 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis: Central axle trailer, low loader Fine-grained steel welded construction Gear-supported front support Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels with anti-splash flaps only on the last axle Aluminum side impact protection Front crossbar that can be inserted into the floor holes Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (linkage compensation) Wheels and tires 235 / 75 R 17.5" as per manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Parking sockets for electrical wiring, ABS/EBS and air connection to the drawbar 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side coupled with the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED Premium LED side marker lights, with "20 LED diodes per light" 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS low-lying steel tub, platform floor made of steel/non-slip metal plate, steel walls firmly welded to the floor Platform length 5500 mm Tub with "Load-Lock profile" at the front and on the side for attaching lashing straps (8 pieces at the front, 16 pieces on each side) 2 pairs of lashing rings, 1 x at the front in the corners of the steel tub and 1 x at the rear in the floor, each 5 tons 3 pairs of additional lashing rings in the floor, each 5 tons 4 pairs of lashing rings screwed onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, can be shifted sideways with handrail on the ramps covered with wood (tip area with steel/non-slip metal plate) with gas spring for single-person operation Rear wall / rear corner posts Screen-printed panel, 400 mm high, pluggable, between ramps Operating instructions The specified total weight is technically possible, depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Country of registration / signs Country of registration: Germany Type approval according to EG 2007/46 prepared for license plate holder, single-line Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Ksdpfx Aszcnugskpedu Custom-made transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,900 kg, maximum load weight: 8,900 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, total length: 8,000 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center-axle trailer Fine-grained steel welded construction Outer frame slightly angled, new design with "Load-Lock profile" for tie-down straps 3 pairs of lashing eyes outside in the floor, each 5 tons 1 at the front in the corners, 1 in front of and 1 in the rear incline at the back 6 pairs of lashing eyes outside in the floor/outer frame, each 5 tons Gearbox support leg at the front Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection, galvanized Splash guards at the rear covering the entire width (not in combination with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Coupling device: Center-axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking System 2-line compressed air brake system Color-coded line routing for easy servicing Hand-spindle parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 volt ABS and ALB, with ABS connector at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and Tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical System 24 volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front, in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel/diamond plate floor for high point load capacity Note: Slight floor waviness due to welding distortion is possible! Platform length approx. 6,200 mm Rear incline to approx. 900 mm Front wall / corner posts at the front 25 mm aluminum hollow profile, 400 mm high Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / corner posts at the rear Kjdpfxjzcqpas Akpsdu 1 pair of steel uprights attached to the frame, with brackets for locking the access ramps, access width approx. 2,430 mm Access Ramps Steel ramps 2,300 mm long, 510 mm wide, laterally movable With handrail on the ramps Covered with wood (tip area with steel/diamond plate) With gas spring for one-person operation Operating Instructions The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and following behavior possible due to incorrect load distribution) Country of Registration / Signs Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rusting" Front wall Aluminum Side wall Aluminum, anodized Access ramps Hot-dip galvanized Customized Transport Solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel Kedpfxszhfzgj Akpjdu * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 12/2016, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,530 mm, total length: 9,000 mm, total width: 2,480 mm, total height: 3,900 mm, suspension: air, tire size: 385 / 55 / R22.5, wheelbase: 6,890 mm, General information Model year: 2026 Axle configuration Tyre size: 385 / 55 / R22.5 Kjdpfx Ajzv I Aijkpjdu Make axles: BPW Brakes: disc brakes Suspension: air suspension Middle axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Middle axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 3.750 kg Carrying capacity: 14.250 kg GVW: 18.000 kg Functional Make of bodywork: Booi Carrosserie Plywood BDF Box History Number of owners: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Kedpfxez Sna Io Akpjdu General information Year of construction: 2014 Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: ABS, EBS, 2+1 Axle Platform Trailer Ksdpfoyaxthox Akpsdu

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,950 kg, maximum load weight: 23,050 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, total length: 9,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis – Central axle trailer design Fine-grained steel welded construction Gear-supported front leg Hydraulic rear supports Wheel chocks with holder Aluminum side impact protection Without under-run protection Mud flaps at the rear, covering the entire width Mud flaps in front of each axle and anti-splash mud flaps behind each axle Plastic tool box, with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening elements to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3,000 mm Tie-down points for low-bed trailers Recessed ring-type tie-down points in the outer frame, each rated at 5 tons (can be converted to stake pockets) Tie-down eyes at the top and on the sides in the outer frame, each rated at 10 tons Towing device – Central axle trailer Drawbar with a tested 50 mm tow hitch Axles + Suspension Drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Last axle with trailing arm steering, with automatic reversing lock controlled via the reversing light, and an additional locking function on the vehicle via a manual button. Air suspension 1st axle – automatic lift axle, additionally manually lowerable, operable with a button on the vehicle Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle EBS, electronic braking system with EBS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle height in conjunction with the lift axle; when the lift axle is raised, the loading or overall height increases by 50 mm Vehicle – Driving stability system Trailer Info Center for displaying vehicle data such as axle loads, mileage, and diagnostic/system messages Axle load detection via EBS-CAN bus signal for display on the display in the cab Wheels and tires 235/75 R17.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin fail-safe plugs at the front, with connection cable Additional LED work light at the rear LED rotating beacon with mount Warning signs, LED illuminated and extendable to 3,000 mm Floor Subsequently with 70 mm softwood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm softwood flooring Low-bed platform including rear slope 7,500 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Covered with wood Kdodpfx Ajzcv D Nekpju Hydraulically operated via towing vehicle’s auxiliary drive with throttle, operation on the left side in the front Hydraulic lateral adjustment of the ramps, individually controllable Hydraulic connection with quick-release coupling NW 10/3, including connection hose Customized transport solution

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Kdedpfxszadb Do Akpsu Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21201012165, empty load weight: 2,290 kg, maximum load weight: 9,510 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 910 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Equipment: ABS, - Please note: stock photos! #Chassis – Centre-axle Trailer - Fine-grain steel welded construction - 6 pairs of lashing rings, bolted externally into the floor/outer frame, 5 t each - 2 additional pairs of lashing rings bolted into the floor at the corners, 5 t each - Geared landing leg, front - Folding rear support - 2 wheel chocks with holder Ksdpfx Aez Akl Tjkpsdu - Galvanised steel underrun protection - Rear mudflap, full width (not compatible with forklift pocket mounting) - Quarter-shell mudguards - 1 plastic toolbox with removable tray, W=620/H=360/D=440 mm, lockable with a padlock (lock not included) - 1 row of lashing/stake rails recessed centrally along the floor (from the end of the front cross-member to the start of the rear cross-member), approx. 100 mm high, with 20 mm round steel bars top and bottom, approx. 60 mm apart, closed at the bottom with an angle plate, open on the lower half; for lashing and inserting 80 x 80 mm stakes - Hook-in rail for aluminium ramps at the rear - 1 storage compartment for loading ramps, for ramps 3000 x 360 mm - Centre-axle trailer coupling gear - Drawbar with approved 40 mm towing eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles + Suspension - BPW drum-brake axles, axle spacing approx. 990 mm - Laser-measured axle/chassis alignment – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensation) #Wheels and Tyres - 235/75 R 17.5" - manufacturer's choice - Steel wheels, factory silver #Braking System - 2-line air braking system - Spring-loaded parking brake - Integral air reservoir - 2 mismatch-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS connector at the front, with connecting cable #Electrics - 24 volt, multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red outline marker lights at the rear - 1 x 15-pin connector at the front, with connecting cable #Floor - Steel/chequer-plate floor for high point-load capacity - Film-faced plywood panels, approx. 30 mm thick, for high point-load capacity, bolted-on version - Note: slight floor undulation possible due to weld distortion - Bed length approx. 5,200 mm #Country of Registration/Plates - Country of registration: Germany - with DEKRA inspection and certification (in accordance with §13 EC-FGV) - Down-rated to a permissible gross weight of 9,900 kg – exempts from the six-monthly safety inspection (SP), with correspondingly reduced payload - 24/7 service hotline - prepared for a single-row number plate holder - Contour marking with reflective tape to ECE R048, white on the sides and red at the rear #Paint Finish - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation - Note: floor undulation possible due to hot-dip galvanising - Please note: stock photos!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,995 kg, maximum load weight: 16,005 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 8,450 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Center-Axle Trailer Fine-grained steel welded construction 2-speed gear-supported landing leg at the front Folding rear support 2 jockey legs with holder Aluminum side impact protection Splash flaps at the rear, spanning the entire width Quarter panel fenders in front of and behind each axle with anti-spray splash flaps according to EC regulations 1 aluminum storage box with stainless steel flap Container locking mechanism, 1 pair of recessed locking recesses in the floor for 1 x 20 ft container, 1 pair of container locking adapters Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3000 mm Tie-down points, low-bed trailer 1 pair of tie-down brackets additionally at the front in the front cross member, 10 tons each 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) 7 pairs of tie-down cleats recessed on top and on the side in the outer frame, 10 tons each Coupling system, center-axle trailer Drawbar with tested 50 mm tow hitch Axles + Suspension Drum brake axles, according to the manufacturer's choice "Axle/chassis laser aligned" reduces tire wear and fuel consumption Axle distance 1810 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Parking sockets for ABS/EBS and air connection on the drawbar or drawbar 24 Volt EBS, electronic braking system with EBS connector at the front with lift and lower valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the cab "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the towing vehicle, via EBS Wheels and Tires 235/75 R17.5, manufacturer's choice Protective caps for wheel studs Electrical System 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side, coupled with the turn signal "Flashing side marker lights" Premium LED side marker lights, with "20 LED diodes per light" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Kdedjzcvt Rjpfx Akpou Parking sockets for electrical system on the drawbar LED work lights on both sides 2 additional LED work lights at the rear 1 LED rotating beacon with holder, switched via sidelights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor thereafter with approx. 70 mm soft wood flooring, in the wheel arch area steel/diamond plate flooring Rear inclination with "Mega Grip surface" made of interlocking grating Low-bed area including rear inclination 6,500 mm Front panel / corner posts Aluminum profile, approx. 400 mm high, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Ramp surface with "Mega Grip" made of interlocking grating Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left side Hydraulic side displacement of the ramps, individually controllable Hydraulic connection with quick-release cou

Condition: used, Sold as is, loading included free of charge. Price per unit, 5 units available. Kedjycqgrepfx Akpsdu

Condition: good (used), Year of construction: 2015, fuel type: electric, Nifty Lift 170 HAC Trailer-Mounted Aerial Work Platform, 230-volt, trailer, 2015 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always available. Kedpfx Asz Nwyiskpedu Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires Kedpfx Akezd Eynspsdu 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear Kdedezw Ep Nspfx Akpeu - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Kdjdpfezv Nrlex Akpsu

Condition: good (used), Year of construction: 2019, Dimensions Length 13,730 mm Extension 22,500 mm Maximum length (extended) 36,230 mm Width of the loading platform 2,550 mm Height 1,450 mm Kingpin 2.0 inches Kingpin height +/- 1,200 mm Extras 3-stage extendable NATO socket Tie-down points Stake pockets Wooden floor Jost support winches Kedpjzy I Igjfx Akpsdu Stainless steel toolbox Electro-hydraulic pump for trailer functions Remote control Central lubrication system with 2 BEKAMAX pumps = Further information = Year of manufacture: 2019 Unladen weight: 13,900 kg Payload: 41,600 kg GVW: 55,500 kg Height of the loading platform: 1450 cm Technical condition: good Price: On request

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Year of construction: 2026, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are carried out individually to customer specification. #Chassis – centre-axle tipping trailer - Steel welded construction, continuous rear tipping shaft with 80 mm ball-type tipping bearing - Geared support leg at front - Foldable rear support - 2 wheel chocks with holder - Steel rear underrun protection - Mudflaps at rear, full width - Quarter-shell mudguards - Lockable storage compartment for loading ramps beneath the load bed - 1 plastic tool box with removable tray, w=620/h=360/d=440 mm, lockable with a padlock - Note: side board touches the storage box when folded down - Lockable storage compartment for loading ramps beneath the load bed - Drawgear for centre-axle trailer - Drawbar with approved 40 mm tow eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles & suspension - SAF drum brake axles - "Laser-aligned axles/running gear" – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free rubber-steel bushings and mechanical axle-load equalisation (rocker equalisation) #Wheels & tyres - 285/70 R 19.5" - Manufacturer's choice - Steel rims, factory silver #Braking system - 2-line air braking system Kodpfx Aozd D Scekpodu - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS socket at front, with connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 V, multi-chamber lights, yellow LED lighting on the sides - 2 white position lights at front - 2 white/red outline marker lights at rear - 2 x 7-pin anti-mismatch plugs at front, with connecting cable #Hydraulics - Three-way tipping gear, hydraulic multi-stage telescopic ram with stroke limiter and safety cable - Low-pressure cylinder up to max. 170 bar, without restrictor valve; to be retrofitted on the truck if required - Hydraulically operated via the truck's PTO - Hydraulic connection with quick-release coupling, DN 10/3, incl. connecting hose #Tipping body - Sturdy tipping body with 4 mm steel sheet floor, steel side-board structure, continuous side walls, foldable and pivot-mounted with central locking at the bottom; rear corner posts, plug-in type; tailgate foldable and pivot-mounted, with central locking at the bottom - Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom - Side-board return springs - Platform width 2,420 mm - 5 pairs of lashing eyes in the floor, 5 t each #Operating notes - The stated gross vehicle weight is technically achievable; depending on the load, it may not be reached while observing the permissible axle, support and fifth-wheel loads #Country of registration/plates - Country of registration: Germany - With DEKRA inspection and certificate (in accordance with §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear #Paintwork - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation" - Side boards/platform painted in colour of choice - Bespoke transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Kdjdpjzcv Stofx Akpou Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: good (used), axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,600 mm, loading space width: 2,550 mm, loading space height: 950 mm, total length: 8,310 mm, total width: 2,550 mm, color: white, Year of construction: 2021, Mileage: 133,000 km Unladen weight: 4,620 kg Payload: 13,380 kg GVWR: 18,000 kg Body brand: WIESE TA 18 OK Technical condition: good Optical condition: good WIESE TA 18 OK – 2-AXLE TANDEM TRAILER – 18 TONS – TWISTLOCKS – SAF – AIR SUSPENSION GENERAL DATA Brand: WIESE Type: TA 18 OK Design: 2-axle tandem trailer First registration: 05/12/2021 Technical total weight: 18,000 kg Unladen weight: 4,620 kg Payload: approx. 13,380 kg Number of axles: 2 Axles: SAF Suspension: Air suspension Braking system: WABCO DESCRIPTION Very robust and versatile WIESE TA 18 OK 2-axle tandem trailer from 2021 with a technical total weight of 18,000 kg. The trailer is designed for professional and intensive use and features a fully galvanized chassis, aluminum side walls, twistlocks for container transport, SAF axles, and air suspension. With an unladen weight of only 4,620 kg, the trailer offers a payload of approximately 13,380 kg. Ideally suited for transport companies, construction companies, crane companies, machinery dealers, and for the transport of containers, machinery, building materials, and various heavy goods. CHASSIS & AXLES The WIESE trailer features a robust tandem design and is equipped with: Kdsdpfxozy Eqfs Akpju * 2-axle tandem design * SAF axles * Air suspension * WABCO braking system * Technical total weight 18,000 kg * Robust chassis for professional use * Fully galvanized construction * Very good corrosion protection * Easy-to-maintain design * Stable driving characteristics, even under heavy load The combination of SAF axles and air suspension ensures comfortable and stable driving characteristics. LOADING AREA & BODY The loading area is versatile and equipped with: * Aluminum side walls * Twistlocks for containers * Robust loading area * Galvanized substructure * Suitable for various transport tasks * Professional design for daily use Thanks to the integrated twistlocks, the trailer is ideally suited for the transport of corresponding containers and demountable bodies. The aluminum side walls also allow for the flexible transport of building materials, pallets, machines, and other goods. DIMENSIONS Length: approx. 6,600 mm Width: approx. 2,550 mm Loading height / Height: approx. 950 mm The low loading height of only approx. 950 mm ensures a favorable center of gravity and facilitates loading and unloading. STAINLESS STEEL TOOLBOXES The trailer is particularly well-equipped with: 4x stainless steel toolbox This provides ample protected storage space for, for example: * Lashing straps * Chains * Tie-down straps * Tools * Transport accessories * Container accessories The stainless steel design is durable, easy to clean, and ideal for daily professional use. SUPPORTS For safe and practical...

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, next inspection (TÜV): 10/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 950 mm, suspension: steel, tire size: 235/75 R17,5", color: green, The images are archive images. The vehicle may be in use! Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing, front gear support, foldable rear support, chocks with holder, steel underride protection, splash guards at the rear over the entire width (not in conjunction with forklift mount), quarter panel fenders, spare wheel, same brand as standard tires, steel rim, loose, plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side board touches the storage box when folded down, lockable storage space for loading ramps below the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (mounting rail for ramps at the rear) Drawbar with tested 40 mm towing eye, drawbar height-adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axle/suspension laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker compensation) 2-line compressed air braking system, color-coded line routing for easy servicing, hand-operated parking brake, integral air tank, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connection line to the truck. Kodpfsk E Tdajx Akpjdu 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin connector at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, incl. connection hose, operated hydraulically via truck auxiliary drive Stable tipping platform with 4 mm steel sheet floor, steel side board construction, continuous side walls, foldable and pivotally mounted with central locking at the bottom. Corner posts at the rear can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side board retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, each 5 tons. Operating instructions: The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and tracking behavior possible due to incorrect load distribution). Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. The images are archive images. The vehicle may be in use!

Condition: used, axle configuration: 2 axles, total length: 7,200 mm, total width: 2,500 mm, Carrying capacity: 12.000 kg VAT/margin: VAT qualifying Kdodsz S Aw Sspfx Akpou

Condition: new, first registration: 12/2014, Year of construction: 2014, KRONE turntable - Jumbo trailer with swap body • ABS • Lifting and lowering system • BPW ECO Plus axles • Fully air-suspended • LED taillights • Length-adjustable drawbar • Tire size: 445/45 R 19.5 • Well-equipped tires! Kdsdpowmpkrjfx Akpou • 18,000 kg gross weight KRONE swap body • With split side walls • Kinnegrip • Wooden floor • High bulkhead • Interior dimensions: 7,250 x 2,500 x 600 mm (LxWxH) • Loading edge/height: 1,180 mm - New vehicle inspection/test certificate! - Ready for use Subject to errors and prior sale!