Used Femi N280Sahx for sale (10)

Condition: used, Year of construction: 2006, functionality: fully functional, For sale: Femi N280SAHX bandsaw from 2006. I have 5 spare bandsaw blades for it. FEMI N280SAHX – a professional metal-cutting bandsaw with hydraulic lowering and cooling. Robust, precise, and ready for use. Ksdpfx Ajzcriuomrslu Technical specifications: - Cutting range: up to approx. 280 mm - Bevel cutting - Hydraulic arm lowering - Built-in cooling - Quick-release vise with hydraulic clamping - Power supply: 400V - Roller feed system, approx. 2m long - Ability to cut at a 60-degree angle Ideal for workshops, locksmith shops, and production. Used, fully functional.

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width 250 mm cutting speed 45 / 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm capacity 45 degrees: flat 135 x 185 - 145 x 150 mm capacity 45 degrees: round 150 mm capacity 45 degrees: square 145 mm capacity 60 degrees: flat 63 x 107 - 69 x 90 mm capacity 60 degrees: round 70 mm capacity 60 degrees: square 70 mm capacity 90 degrees: flat 240 x 160 - 250 x 110 mm capacity 90 degrees: round 225 mm capacity 90 degrees: square 185 mm total power requirement 0,75 / 1,1 kW weight of the machine ca. 200 kg dimensions of the machine ca. 1385 x 580 x 890 mm Technical features: - Hydraulic head descent control system - End stop at the end of the cut - Powerful three-phase induction motor with 2 speeds and Transmission with oil bath - Saw frame, vice and swivel group made of cast steel - Steel blade guide with ball bearings - Vice with quick clamping - Lever integrated on the front for locking the miter adjustment - Coolant pump with aluminum body - Large hand wheel for easy saw blade tension - Pressure gauge to show the belt tension (600-1000 kg/cm3) - Emergency stop safety switch - Swarf brush for cleaning the saw blade STANDARD EQUIPMENT: Kljdpfx Aslb I Daomrsu - Mountable base cabinet - coolant tank - Electric coolant pump - Length stop for serial cuts - Band change and settings tools - Chip removal brush - Hydraulic cylinder with feed control

Condition: new, Year of construction: 2025, functionality: fully functional, New, innovative DCS system with 5 pre-set cutting speeds for the most common materials. In addition, the belt speed can be manually adjusted continuously. A load indicator signals the motor load, in order to minimize motor damage, potential saw blade breakage, and cutting errors caused by excessive pressure. The reversed rotation direction of the saw blade (NG system) enables a cutting speed up to 40% faster than with traditional machines. The patented slip clutch prevents over-tensioning of the saw blade. A cutting line laser facilitates accurate positioning of the material. Despite a large cutting area of 110x85 mm, the machine is very light at 17 kg. The saw frame and base plate are made of aluminum die-cast and thus enable an enormous weight reduction. The vice cast into the base plate ensures maximum precision. A miter adjustment of 0 – 45° and adjustable belt guides enable versatile applications and accurate cuts. Kljdpjy Tnctsfx Amrou FEMI – quality for professionals and demanding DIY enthusiasts. Technical data: Motor: 230 V, 50 Hz, 0.95 kW Saw blade dimensions: 1330x13x0.65 mm Weight: 17 kg Saw blade speed: continuously adjustable, 30 – 80 m/min Miter angle: 0 – 45° Cutting area in mm: 0° 110x85 105 100x100 45° 75x37 74 72x72 Scope of delivery: 1 saw blade 1330x13x0.65 mm, 14 teeth/inch 1 length stop, 500 mm Operating manual and CE declaration of conformity

Condition: new, Year of construction: 2025, functionality: fully functional, New, innovative DCS system with 5 pre-set cutting speeds for the most common materials. In addition, the belt speed can be manually adjusted continuously. A load indicator signals the motor load, in order to minimize motor damage, potential saw blade breakage, and cutting errors caused by excessive pressure. The reversed rotation direction of the saw blade (NG system) enables a cutting speed up to 40% faster than with traditional machines. The patented slip clutch prevents over-tensioning of the saw blade. A cutting line laser facilitates accurate positioning of the material. Despite a large cutting area of 110x85 mm, the machine is very light at 17 kg. The saw frame and base plate are made of aluminum die-cast and thus enable an enormous weight reduction. The vice cast into the base plate ensures maximum precision. A miter adjustment of 0 – 45° and adjustable belt guides enable versatile applications and accurate cuts. FEMI – quality for professionals and demanding DIY enthusiasts. Technical data: Motor: 230 V, 50 Hz, 0.95 kW Saw blade dimensions: 1330x13x0.65 mm Weight: 17 kg Saw blade speed: continuously adjustable, 30 – 80 m/min Miter angle: 0 – 45° Klsdpfxjy Tk N Ae Amreu Cutting area in mm: 0° 110x85 105 100x100 45° 75x37 74 72x72 Scope of delivery: 1 saw blade 1330x13x0.65 mm, 14 teeth/inch 1 length stop, 500 mm Operating manual and CE declaration of conformity

Condition: new, cutting diameter 120 mm capacity 90 degrees: flat 120 x 102 mm capacity 90 degrees: square 112 x 112 mm capacity 45 degrees: flat 78 x 78 mm capacity 45 degrees: round 80.0 mm capacity 60 degrees: flat 50 x 43 mm capacity 60 degrees: round 50.0 mm cutting speed 35 - 80 m/min saw band length 1440 x 13.0 x 0.65 mm voltage 230 V engine output 1300 Watt Kljdpfxexaawto Amrsu weight 18.0 kg range L-W-H 520 x 400 x 900 mm Portable metal band saw for cuts between 0° and 60° Dry cutting (no coolant) Up to 60% faster cutting compared to a conventional band saw thanks to the NG system with opposite direction of rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled band tensioner . for checking and setting the correct band tension - Steel vice with prism-shaped guide - Powerful 1300 W motor - "Constant Speed" setting with current limitation - Stable, robust frame made of sectional steel - Bracket locking device for easy transport Accessories included: - Adjustable length stop 500 mm - Detailed operating instructions + maintenance manual - Circuit diagrams and exploded drawings - Saw blade for pipes and profiles

Year of construction: 2011, condition: excellent (used), FEMIA bean calibrator, unused Kjdpfx Aewykpcemrslu

Year of construction: 2013, condition: excellent (used), Device for separating clusters of green beans, little used device Kljdpfx Amowz I Tuorsu

Year of construction: 2001, condition: refurbished (used),  Femia air cleaner/separator with feeding vibrator and control platform for sale  Completely refurbished Kljdjyxnu Topfx Amreu  Equipped with an electrical control panel and frequency converter  Capacity: 12–14 t/h green peas, 10–12 t/h sweet corn  The machine is currently undergoing refurbishment; the photos were taken before the refurbishment  Refurbishment completion: approximately April 30, 2026 FCA Debrecen

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display Kodpfxed R U Ads Amrjlu →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness Klodpjd R U Agefx Amrsu →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surf