Used Faymonville Multimax Satteltieflader (2+2) - Nachlaufgelenkt for sale (78,133)

Condition: new, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Here is an excerpt of the equipment. Complete equipment details are available upon request. GOOSENECK: Gooseneck with SNT design to optimize the loading area length, approximately 3,700 mm long, with a taper at the rear of approximately 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. Steel front wall, plug-in, approximately 400 mm high. ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. 3 kW electric-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches. Outrigger of the gooseneck with mounting holes for screwable lashing rings. One mounting hole in the rear upper area of the gooseneck outrigger for a screwable lashing ring. 1 pair of screwable lashing rings included (LC 10,000 daN). On the gooseneck, 1 pair of plug-in aluminum side panels, approximately 400 mm high, in an anodized finish. On the gooseneck, one plug-in aluminum rear panel, approximately 400 mm high, in an anodized finish. Approximately 40 mm thick hardwood flooring above the gooseneck. 2-inch kingpin. 1 crossmember pocket rail mounted in the loading bed of the gooseneck in front of the taper, for plug-in crossmembers, approximately 100 x 50 mm. LOADING AREA: Fpsdpfoz N Nxwox Aivjn Loading area in an extendable design, approximately 8,800 mm long, with a taper at the rear of approximately 500 mm x 10°. A recess in the loading area that extends into the taper to accommodate the excavator arm, approximately 2,490 x 750 x 210/290 mm (L x W x H). TPMS tire pressure monitoring system according to ECE R 141. BPW axles and suspension, 1st and 2nd axles rigid, 3rd and 4th axles steered. 3rd and 4th axles with electro-magnetic reverse locking via reverse gear and can be activated manually. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Mechanical fifth-wheel supports with 2-speed gearbox and crank. Continuous hardwood flooring approximately 50 mm thick in the loading area, interrupted between the axles (thus increasing the coefficient of friction). 1 intermediate table with a recessed loading area, approximately 300 mm wide, for the extension tube with a large cross-section and sheet metal flooring. 1 pair of lashing rings on the front crossmember (LC 10,000 daN). 6 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN). Additionally, 1 pair of lashing rings on the outside of the front crossmember of the loading area, rotated approximately 90° inwards towards the loading area (LC 10,000 daN). Extensions (galvanized), extendable approximately 230 mm on each side (without wooden planks). 1 pair of fixed wheel arches, open to the extension, approximately 700 x 410 mm (W x D), in the loading area in front of the 1st axle. Between the 2nd and 3rd axles in the loading area, 1 pair of fixed wheel arches, approximately 1,695 x 700 x 410 mm (L x W x D). 1 pair of mechanical rear supports. 245/70 R 17.5 3PMSF twin tires - brand of our choice. HYDRAULIC LOADING RAMPS: DR-15/60-900-4350-HB-HV-M. A pair of two-piece steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm. Hardwood flooring. Hydraulically foldable ramp tips. Ramps can be individually hydraulically moved outwards approximately 235 mm and inwards approximately 215 mm. Hardwood flooring on the taper of the loading area. Ramp with hardwood fl

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid Fpjdsy Auh Ijpfx Aivon * Sandblasting painted...

Condition: used, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 08/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. GOOSENECK * Designed in SNT for optimized loading area length * Length approx. 3,700 mm, with a rear slope of approx. 1,000 mm x 10°. For SZM: 4 x 2, 6 x 2, and 6 x 4. Fedpfozz Ei Rex Aivspn * Front panel made of steel, plug-in type, approx. 400 mm high * ASPÖCK-UNIBOX on the connection strip at the front with sockets * 3 kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches * Without installation of the supply connections on the SZM * Outriggers on the gooseneck with mounting holes for screw-on lashing rings * The first hole is approx. 200 mm from the front, followed by one every approx. 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood deck above the gooseneck * 2-inch kingpin * Guide plate on the gooseneck for the turntable, approx. 500 mm wide * 1 pair of recessed bolster pockets on the gooseneck for plug-in bolsters, approx. 100 x 50 mm LOADING AREA * In an extendable design, length approx. 8,800 mm with a slope at the rear of approx. 500 mm x 10°. * A recess in the loading area and extending into the slope for accommodating the excavator arm, approx. 2,490 x 750 x 210/290 mm (L x W x H). * TPMS tire pressure monitoring system according to ECE R 141. * Mechanical landing gear with 2-speed gearbox and crank. JOST Module B * Static test load = approx. 50,000 kg * Continuous hardwood deck, approx. 50 mm thick, on the loading area and interrupted between the axles (this increases the coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with a large cross-section. * 1 pair of fixed wheel recesses in front of the axles, open to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area - 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the loading area between the 1st and 2nd axles. Wheel recesses with square ladder strips approx. 15 x 15 mm and widening in the lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axles, which can also be used as widening boards (if the vehicle is equipped with extendable wideners) * 1st axle with starting aid BPW axles and suspension * 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock via reverse gear and can be activated manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve. * 235/75 R 17.5 3PMSF twin tires. Manufacturer of our choice HYDRAULIC LOADING RAMPS * DR-15/60-900-4350-HB-HV-M * A pair of two-piece steel ramps * with a length of approx. 4,350 mm and a width of approx. 900 mm. Hardwood deck * Hydraulically folding ramp tips. Ramps can be individually shifted hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm * Maximum load and angle of inclination according to the technical data sheet: C465497 * In accordance with Regulation 2021/535/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm in the driving position. * Hardwood deck on the slope of the loadin

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Fsdpfez I A Tqex Aivopn Faymonville Multimax F-S43-1AAF 3 axle stepframe trailer 06-2014 Airsuspension 1 positive steert axle Double hydraulic ramps Hydraulic floor Its own 24 V powerpack for the hydraulics Winch Loadingfloor lenght 9.2 m ABS HU tuv 02-2026

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires Fpedpjrgzv Njfx Aiven * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: good (used), axle configuration: 3 axles, first registration: 12/2007, suspension: air, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension = Further Information = Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Unladen weight: 12,940 kg Payload: 21,060 kg GVW: 34,000 kg Technical condition: good Optical condition: good Vehicle number: Low-bed trailer: 15 Faymonville / 3 axles, steerable, with remote control SAF / Extendable .: YA9TL35F02113453 SAF 3 x Steerable axles with remote control Unladen weight: 12,490 kg Total weight: 34,000 kg Length: 9.20 m, with extension 15.10 m + extension 20.40 m, total length 24.40 m Width: m = Company Information = Fedpfx Aszvzt Isivjpn No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment Complete equipment available upon request GOOSENECK * Designed in SNT to optimize the loading area length * Length approximately 3,700 mm, with a rear slope of approximately 1,000 mm x 6° For SZM: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX Grid floor with 5 mm sheet metal reinforcement on the gooseneck and the rear slope * 2-inch kingpin * Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide, round * NATO socket on the connection strip at the front on the gooseneck * 1 pair of pluggable aluminum side panels, approximately 400 mm high, in anodized design Fodpfx Aijzzhfuovepn * 1 LED work light each on the left and right, mounted at the top of the front wall * Controlled via on/off switch (operation of the work lights from the SZM is not possible in this case) LOADING AREA * Length approximately 9,600 mm, with a rear slope of approximately 900 mm x 6° * Loading area after the gooseneck can be hydraulically raised and lowered, length approximately 3,000 mm * Load capacity up to approximately 9,000 kg on the lifting platform and the loading area, continuous grid floor with approximately 5 mm sheet metal underlay as additional reinforcement, designed for point load TIRES * 235/75 R 17.5 3PMSF, twin tires, manufacturer of our choice * TPMS tire pressure monitoring system in accordance with ECE R 141 AXLES * BPW axles and suspension * 1st and 2nd axles rigid * 3rd axle with trailing steering * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with start-assist * Technical axle load: 12,000 kg each AIR SUSPENSION * with raising and lowering valve HYDRAULIC LOADING RAMPS * 1 pair of two-piece AXS steel ramps with grid floor and a length of approximately 4,920 mm and a width of approximately 900 mm * Hydraulically foldable ramp tips, ramps can be individually moved hydraulically outwards by approximately 235 mm and inwards by approximately 365 mm * Flashing lights on the outer sides of the ramp tips, with a switch next to the ramp control * Ramp securing in driving position by means of a quick-release fastener * Painted sand coating on the outer frame of the ramp as well as on the ramp tip * Mechanical supports in drop tube design on the sides of the ramps to support when docking with loading ramps * Control valves for the hydraulic ramps on the right side of the vehicle BRAKE SYSTEM * From WABCO EBS-E according to EU regulations SURFACE TREATMENT * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection PAINTING * Semi-trailer carmine red (RAL 3002) * Rims silver gray, side panels aluminum natural * Wheel hubs according to axle manufacturer, lamp sign pure white (RAL 9010) EQUIPMENT * Front wall made of steel, pluggable, approximately 1,600 mm high * Including connection strip for supply lines to the SZM, mounted approximately 1,000 mm from the lower edge of the outer frame profile * Possibility to attach lashing chains on the inside of the front wall on the left and right * Including aluminum tray underneath on the left and right for storing chains or lashing straps behind the front wall, approximately 12 mm thick DELIGNIT surface, screwed on * 2 pairs of screwable lashing rings additionally (LC 5,000 daN) * Electric winch, approximately 5,400 kg pulling force, with

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: * Hydraulically extendable/retractable and lowerable gooseneck, length ± 3,650 mm * 2 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the middle section of the gooseneck (LC 10,600 daN) * Suitable for 6 x 4 or 8 x 4 tandem axle vehicles Compact front axle: * Hook receiver at the front and rear, length: approx. 2,200 mm * Axle width: approx. 2,850 mm Excavator bridge: * Telescopic excavator bridge with traversable bridge hooks at the front and pin-and-plate coupling at the rear * Overall width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance approx. 150 mm 4-axle rear axle: Fsdjxbmpljpfx Aivopn * Mechanical pin-and-plate coupling for mounting a low-bed trailer at the front * End crossbeam at the rear, axle width: approx. 2,850 mm * Axle length: approx. 5,480 mm Swivel axles, all axles hydro-mechanically force-locked * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle suspension Tires: * Front axle: * 8 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Rear axle tires: * 16 x tires, selection according to manufacturer (M+S) 285/70 R19.5 * Load index 150/148J Painting: * Complete steel construction automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection. * Final painting with 2 layers of 2K topcoat, single-color in RAL 3002 carmine red, according to the RAL 841GL system. Including the following accessories: * Steel front panel, approx. 400 mm high * Aluminum side and rear walls, pluggable on the gooseneck, approx. 400 mm high, in anodized finish * 3.5-inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Gantry for suspending the supply lines; the SZM tank must have a minimum capacity of 80 liters. * With MAX Trailer coupling parts; otherwise, coupling parts must be supplied by the customer. * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit, type No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front axle with a separate air connection for air suspension * BEKA-MAX central lubrication for a 2-axle axle with standard grease NLGI-2 * One 7-pole socket on the left and right at the rear of the front axle for warning signs * Screw-in option (approx. 40 mm diameter) every approx. 500 mm on the outside of the top chord of the outer beam of the excavator bridge for screw rings (LC 16,000 daN) * Foldable wideners with steel mats, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for a 4-axle axle with standard grease NLGI-2 * On the rear axle, a socket for the cable remote control of the trailing axle * Rear axle with tipper body * Two INOX toolboxes, approx. 855 x 340 x 390 mm, on the gooseneck, left and right * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the power pack, start/stop of the diesel engine

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, More vehicles available. Excerpt from the equipment list below. Full equipment details on request. GOOSENECK: Fsdpfxoxarmae Aivspn * Gooseneck in SNT design, optimized for loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * Suitable for tractors: 4 x 2, 6 x 2, and 6 x 4 * Detachable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling all hydraulic functions except hydraulic winches * Gooseneck outer rail with mounting holes for screwable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at rear part of gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Approx. 40 mm hardwood floor covering on gooseneck, checker plate covering over kingpin * 3.5-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retention spring hanging on the outer rails of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, length approx. 8,800 mm with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical lock bolt and reinforced locking positions; supply lines routed securely inside the extendable rails, automatically adapting to the current platform length * BPW axles and suspension; 1st axle steerable, all others force-steered via hydro-mechanics * 1st axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting/lowering valve * 235/75 R 17.5 3PMSF twin tires – brand at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B – static test load 50,000 kg * Full-length hardwood floor, interrupted between axles, approx. 50 mm thick (increases slip resistance). – Long slots for removable and repositionable bridging elements * At the front of the platform – 1 movable intermediate table, approx. 300 mm wide, for the large-cross-section sliding tube, with checker plate covering. – Front and rear with long slots for removable and repositionable bridging elements * 1 pair of lashing rings on front cross member (LC 10,000 daN) * 7 pairs of flush-mounted, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extendable (galvanized) widened sections, approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering operable from front and rear via cable remote control, with single-track control of axles, without installation on the tractor * TPMS tire pressure monitoring sensors fitted to all wheels * Deck locking with conically welded locking profiles every 500 mm * Lock monitoring left and right on the trailer * Mechanical lock for intermediate table (approx. 300 mm wide) to secure the table when extended * 5 pairs of threaded blocks mounted on the extendable rail for the installation of M20 screw-in rings (LC 5,000 daN) BRAKING SYSTEM

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) Fjdpfjyhkquex Aivopn - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: excellent (used), Year of construction: 2026, Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Total permissible weight: 49.500 kg Information: sample images Information: Location: Essen Fpsdpfezdiziox Aivjn immediately available.

Condition: good (used), Year of construction: 2004, Extras Single extension Toolbox made of stainless steel Lashing points Spare wheel with bracket Mechanical landing gear Rear bumper with lighting Toolbox mounted on the gooseneck Warning signs for overwidth Twist-lock for containers Kingpin 2.0 inches = Further information = Year of manufacture: 2004 Unladen weight: 10,800 kg Payload: 47,200 kg GVW: 58,000 kg Fpjdpfx Aiezym T Uovon Technical condition: good Visual condition: good Price: On request

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English Fodsx Upxxepfx Aivopn

Condition: good (used), axle configuration: 2 axles, first registration: 03/2004, total length: 15,600 mm, total width: 2,550 mm, color: green, Year of construction: 2004, Equipment: ABS, - Air suspension - Central lubrication system Rear axle 1: Steered Rear axle 2: Steered Unladen weight: 13,400 kg Payload: 22,600 kg GVWR: 36,000 kg Superstructure brand: FAYMONVILLE STBZ-2VA Loading platform height: 45 cm Technical condition: good Optical condition: good FAYMONVILLE STBZ-2VA – 2-AXLE LOW LOADER – TELESCOPIC – DETACHABLE GOOSENECK – HYDRAULICALLY STEERED Well-maintained and robustly built Faymonville STBZ-2VA 2-axle low loader, equipped with a detachable gooseneck, telescopic platform, hydraulically steered axles, air suspension, and a central lubrication system. A professional low loader for the transport of construction machinery, excavators, wheel loaders, cranes, as well as long and heavy machinery. GENERAL DATA * Manufacturer: Faymonville * Type: STBZ-2VA * Design: 2-axle low loader * First registration: 19.03.2004 * Number of axles: 2 * Axle manufacturer: BPW * Both axles hydraulically steered * Air-suspended * Central lubrication system * Detachable gooseneck * Excavator boom recess at the rear Fedpfx Aiozy I Tvevopn * Tires: 235/75 R17.5 LOW PLATFORM / LOADING AREA The Faymonville features a particularly low and widely telescopic platform. * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: approx. 1,390 cm * Width: approx. 255 cm * Loading height: only approx. 45 cm * Thickness of the loading platform: approx. 24 cm Due to the very low loading height of only approx. 45 cm, this low loader is ideally suited for the transport of tall machinery where the lowest possible overall height is crucial. The platform is telescopically extendable by an impressive 5.50 meters. This also makes the semi-trailer excellent for particularly long machines, structures and special transports. DETACHABLE GOOSENECK Equipped with a detachable gooseneck. This allows self-propelled machines to be conveniently driven directly onto the low platform from the front. Ideally suited for the transport of: * Excavators * Crawler excavators * Bulldozers * Wheel loaders * Crawler cranes * Road construction machinery * Agricultural machinery * Heavy and special construction machinery AXLES & CHASSIS Equipped with 2 BPW axles, both of which are hydraulically steered. The hydraulic steering ensures excellent maneuverability and is a major advantage, especially in tight construction sites, industrial plants and special transports. In addition, the low loader has air suspension, which ensures good driving characteristics and optimal load distribution. WEIGHTS * Technical total weight: approx. 36,000 kg * Unladen weight: approx. 15,600 kg * Specified payload: approx. 22,600 kg Note: The specified weights should be checked against the vehicle documents, as the unladen weight and specified payload together amount to 38,200 kg. DIMENSIONS * Overall length of low loader: approx. 1,560 cm * Width: approx. 255 cm * Platform length retracted: approx. 840 cm * Telescopic extension: approx. 550 cm * Max. platform length extended: ...

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulically adjustable loading ramps (width) Fpsdswta Alspfx Aivon * Air suspension * Extendable * Tare weight: 11,020 kg -----Internal vehicle number: 11010----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp – German, English – WhatsApp – German, English, Arabic.

Condition: used, empty load weight: 14,100 kg, maximum load weight: 33,900 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 11/1999, suspension: air, tire size: 235/75 17,5, tire condition: 50 %, color: green, Year of construction: 1999, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 68574 Faymonville, Flatbed Trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced-steered axle * Compressed air coupling head (red + yellow) * Connection plug: 2x7-pin * Lift and lower device * Extendable - telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tyre condition, 1st axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 2nd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre condition, 3rd axle: 50% -- 50% - Tyre size: 235/75 R17.5 * Tyre size: 235/75 R17.5 * Manufacturer: ES-GE * Extension faulty * Steering axles not functional * Mobile Disclaimer: Subject to alterations, prior sale, and errors excepted. Fpedpfjyib Ahex Aivsn More photos and videos are available on our website. Our comprehensive services include, for example: * Purchase/sale/rental of commercial vehicles * Fast and hassle-free financing * Arranging all (export) documentation * Order of export/customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration services * Transfer/transport of commercial vehicles Contact our trained staff for advice—we are happy to assist you.

Condition: used, maximum load weight: 47,500 kg, overall weight: 57,000 kg, axle configuration: 3 axles, first registration: 11/2016, total length: 15,840 mm, total width: 2,750 mm, total height: 2,400 mm, Equipment: ABS, * Own hydraulic unit Fsdpfx Aisz Rh Tiovepn * Gooseneck with sideboards * Hydraulically steered axles * Split axles * Extendable to a total length of up to 24,140 mm * Load area widening to a total width of up to 3200 mm * Height-adjustable low-bed * Radio system * Wabco Trailer EBS-E Remorque * Drum brake * Support wedges * Spare wheels ----* Tire size: 245/70R17.5 * Technically permissible total weight: 66,000 kg * Tare weight: 7,700 kg * Total length: 15,840 - 24,140 mm * Inspection due: / ----Vehicle number/Vehicle: 12527----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/inspection approval, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport. ----?YOUR VTS TEAM

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Year of construction: 2015, Damages: none YAFTL2007F0017329 = More information = Empty weight: 13.600 kg Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Fjdpfeymrb Sex Aivjpn Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, maximum load weight: 30,660 kg, overall weight: 43,000 kg, axle configuration: 2 axles, first registration: 03/2024, next inspection (TÜV): 03/2025, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment: Complete equipment available upon request. Loading Platform * Low-bed with central beam in extendable design * Length approx. 6,750 mm * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the rear of the loading platform (LC 10,000 daN) * The supply lines are protected in the central beam and adapt to the respective low-bed length. Gooseneck * Length approx. 3,900 mm * Gooseneck hydraulically adjustable up/down and extendable * Technical saddle load: 23,000 kg Rear Chassis * Short design with closed outer frame and diamond plate cover * Chassis with excavator well, which is closed in the rear half to accommodate the air tanks * 2 pairs of lashing rings that fold outwards (LC 5,000 daN) * 1 pair of lashing rings that fold outwards (LC 10,000 daN) Axles * BPW axles * Hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool Tires * 245/70 R 17.5 3PMSF – Manufacturer of our choice, load index (146/146F) Braking System * According to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels Fjdozvt Tyjpfx Aivjpn * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork * High-quality 2-component (2K) * Topcoat in solid color RAL 3002 carmine red Incl. the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection strip at the front * 4 wheel chocks with bracket. (± 5 kg) * Steering from the front and rear via cable remote control, operable via push buttons, with single-axle steering control (without installation in the tractor unit) * Electro-hydraulic unit (± 45 kg) * Yellow reflector tape according to EU regulations on the side, on the extension, and at the rear of the trailer * 1 wooden block, approx. 500x250x200 mm * Attachment rail for aluminum loading ramps at the rear of the vehicle * One bracket for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * European reflector plates (red-yellow) at the rear of the trailer * On the gooseneck and at the rear panel, one bracket each on the left and right for warning signs including socket * Manual and description on a USB stick * Speed stickers 80 km/h at the rear and on both sides * Load gauge for determining axle loads including load diagram * Incl. special accessories: On the gooseneck, aluminum side and rear walls, plug-in, approx. 2,440 x 400 mm (L x H) * The rear galvanized end crossbars are removable. (Length of the structure approx. 2,560 mm). (± 46 kg) * On the gooseneck, a separate air connection with an air gun. * 2 work lights with a switch on the trailer, mounted on the gooseneck platform on the left and right * 6 pairs of rung pockets for end crossbars approx. 100 x 50 mm in the outer frame of the loading platform * 2 pairs in the outer frame of the chassis (± 29 kg) * Extensions, galvanized, extendable by approx. 230 mm per side (± 262 kg) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling instead of screw co

Condition: used, maximum load weight: 25,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck Gooseneck Light, length approx. 4,080 mm Hydraulically extendable and retractable gooseneck For semi-trailer combinations: 4 x 2 and 6 x 2 Drop Deck Drop deck designed as a telescoping excavator bridge with a front extension and a mechanical locking mechanism. Length x width approx. 6,350 mm x 1,300 mm Rear Axle Assembly Rear axle assembly in a short design with a closed outer frame and diamond plate covering with an excavator well, which is closed in the rear half to accommodate the air tanks. Axles and Suspension BPW axles and suspension, all axles hydro-mechanically steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Braking System WABCO EBS-E braking system in accordance with EU regulations Without connection cable to the tractor unit Fpjdpfxezlmkwo Aivsn Painting 6-layer end treatment Complete steel construction blasted after welding 1 coat of zinc-based primer, 1 coat of adhesion primer Final coating with 2 coats of 2-component paint (acrylic), single color in RAL 3002 carmine red, followed by sealing of cavities with special wax. Rims in silver. Included Accessories Steel headboard, plug-in type, approx. 400 mm high Connection strip for supply lines to the semi-trailer combination, mounted at the height of the outer frame profile Round NATO socket on the connection strip at the front (Maeler & Kaege VG 96 917) 3 kW electro-hydraulic unit for controlling hydraulic operations, with the exception of hydraulic winches 3 pairs of recessed lashing rings on the gooseneck (LC 5,000 daN) 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), at the front approx. 600 mm behind the headboard and at the rear on the gooseneck 2 pairs of welded lashing rings LBS 3 (LC 6,000 daN), on the outer frame of the gooseneck On the gooseneck, 2 pairs of plug-in aluminum side boards, approx. 400 mm high, in anodized design On the gooseneck, a plug-in aluminum rear panel, approx. 400 mm high, in anodized design Above the gooseneck, approx. 12 mm thick Delignit flooring 2-inch kingpin Hydraulic cross member for supporting the gooseneck on the semi-trailer combination or a dolly Air connection with air gun on the gooseneck Access to the gooseneck 2 pairs of rung pockets recessed on the gooseneck, for plug-in rungs approx. 100 x 100 mm On the outer tube, threaded holes for mounting screw-on lashing rings M24 (LC 8,000 daN) 2 pairs of screw-on lashing rings M24 (LC 8,000 daN) included On the top flange, approx. every 1,200 mm, attachment point ø26 mm for screw-on rings (LC 8,000 daN) 10 pairs of lashing rings on the outer girder RBS-5 (LC 10,000 daN), under and between the widening sections Folding, extendable widening sections, lockable to approx. 2,550/2,750/3,000 mm, incl. steel mattresses in a split design, with wooden flooring Bevel at the front of the axle assembly, approx. 350 mm x 12°, including integrated attachment rails at the front and rear for loose loading ramps 2 pairs of lashing rings with retaining spring at the transition from the drop deck to the excavator well (LC 10,000 daN) 3 pairs of recessed lashing rings in the outer frame of the axle assembly, foldable outwards: 1 pair at the front and 1 pair at the rear (LC 5,000 daN), 1 pair in the middle (LC 10,000 daN) 2 pairs of lashing rings LBS-3 (LC 6,000 daN) welded above the wheel arch on the rear axle

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck: Gooseneck with rear slope, approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approximately 30 mm thick. Loading platform: Loading platform can be hydraulically raised and lowered after the gooseneck, length approximately 2,800 mm, with rear slope approximately 1,000 mm x 8°. 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings that can be folded inwards on the center beam at the front (LC 10,000 daN). Grid floor C40/4 (point load approximately 2.3 t on an area of approximately 20 x 20 cm) above the axles. Diamond-plate floor. Two-piece steel ramps: One pair of galvanized two-piece steel ramps in reinforced design, approximately 3,185 + 1,420 x 1,250 mm, with grid floor C40/5 (point load approximately 8 t on an area of approximately 20 x 20 cm). Ramp with hydraulically raising and folding ramp sections and hydraulic lifting mechanism, maximum load per pair: 40,000 kg. In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm do not need to be taken into account in the vehicle length of 16,500 mm when in the driving position. Landing gear: JOST landing gear (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Tires: 235/75 R 17.5 3PMSF TPMS tire pressure monitoring system according to ECE R 141 Axles: BPW axles and suspension. 2 axles rigid, 1 axle steered. Technical axle load: 12,000 kg each. Electro-magnetic parking brake via reverse gear and can also be activated manually. Air suspension with raising and lowering valve. Braking system: WABCO braking system according to EU regulations with EBS-E (2S2M). Colors: Semitrailer RAL 3002 carmine red. Rims silver. Tarpaulin in RAL 9006 silver. Including accessories: 1 spare wheel holder under the loading platform on the right in the direction of travel. 2-inch King Pin. One galvanized steel front panel. Yellow-red air couplings on the galvanized connection strip at the front. 4 wheel chocks with holder on the front panel. Fjdpfszu Ebtox Aivepn 3 height-adjustable wooden planks. Galvanized folding supports under the slope of the loading platform. Height-adjustable tarpaulin superstructure *3,960 mm*. Galvanized front panel with a tensioning mechanism for the sliding curtains. Roof from EDSCHA, height-adjustable by approximately 400 mm, can be moved forward on aluminum roof rail profiles (screwed to the front and rear walls). 3 pairs of adjustable load securing bars in the loading platform. The superstructure can be widened by approximately 750 mm on the left and right at the rear by hydraulic means. Sliding tarpaulin with approximately 700 mm reserve in length, with lashing straps at intervals of approximately 600 mm. Top edge of the superstructure approximately 3,960 mm (loaded). Driving with an open sliding tarpaulin is not permitted and will result in damage to the tarpaulin. On the diamond plates on the gooseneck and on the loading platform, a sand layer is applied as an anti-slip coating. Cover plates to bridge the gap between the ramps and the loading platform. Electro-hydraulic unit at the rear under the loading platform. On the gooseneck and on the ramps, one holde

Condition: used, maximum load weight: 25,630 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2024, next inspection (TÜV): 11/2026, Equipment: ABS,

Condition: used, empty load weight: 9,600 kg, maximum load weight: 30,400 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2011, loading space length: 13,200 mm, loading space width: 2,500 mm, loading space height: 800 mm, suspension: air, tire size: 205/65R17.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, air suspension, lifting and lowering function, 3rd and 4th axles self-steering, ABS (anti-lock braking system), extendable, lashing eyes, drive-on ramps can be fitted, front support legs, rear support legs, lateral aluminium side guard, storage box. Body: 4-axle low-bed semi-trailer with attachable drive-on ramps, SAF axles, 3rd and 4th axles self-steering, 13 pairs of lashing rings, 10 pairs of preparations for plug-in stanchions, 13,200 mm loading length fully retracted, 16,800 mm loading length fully extended, 800 mm loading height in the low-bed area, low-bed length approx. 9,500 mm retracted, next technical inspection (TÜV) due, aluminium ramps available at extra cost of €1,500. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted. - . Fpjdjxxkqzepfx Aivjn

Condition: used, axle configuration: > 3 axles, first registration: 01/2023, Year of construction: 2023, Number of axles: 8 Axle type: Swinging axles Steering: Hydraulic Suspension type: Hydraulic Tires: 245/70 R17.5 Kingpin: 3.5" Color: RAL 5009 Azure Blue Gooseneck length: 3700 mm Overall width of the vehicle: 2990 mm Platform length: 15000 mm Telescopic: Yes / Length of extension 1: 8000 mm Saddle height: 1415 mm Saddle load: 30,000 kg Axle load: 96,000 kg Tare weight: 36,200 kg Maximum permissible load: 126,000 kg Fodpfxjz Ed D Es Aivjpn Payload: 89,800 kg

Condition: used, Year of construction: 2014, Year of manufacture: 2014 Faymonville Mega Z-5H+3L-V-AT-A Lowbed Bj 2014, Bj 2006 3 axle dolly (bj 2014) Airsuspension SAF axles First axle is a liftaxle Last axle positive steert Low Bed (bj 2014) Length 6.410 mm + 3.700 mm extendible Width 3.000 mm + Side extensions 3.500 mm 5 axle (bj 2006) Hydraulic Suspension All 5 axles hydraulic steert Fpjdez I A U Uopfx Aivon Extra remote steering Excavator trough Width 2.750 mm With 80 km/h Kingpin 30 ton 3 axle Dolly 36 ton 5 axle trailer 60 ton Total 125 ton With 30 km/h Kingpin 30 ton 3 axle Dolly 39 ton 5 axle trailer 65 ton Total 134 ton