Used Fasti Tche 254 for sale (962)

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm Ijdeyyc A Uspfx Aa Ieic plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) Iedpfx Aasxaa I Sj Ioic - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment Iiodpjhhc Ixsfx Aa Ijc - cutting line illumination - E-foot switch

Condition: used, Year of construction: 1961, sheet width 1020 mm Iedpszfax Ijfx Aa Ijic plate thickness 2 mm

Condition: used, mileage: 552,000 km, power: 331 kW (450.03 HP), first registration: 07/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space volume: 52 m³, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Actros 2545 L ENA 6x2 flatbed truck with canvas cover * Euro6 * Automatic transmission * High-performance engine brake * Engine brake * StreamSpace cab, 2.50m * Sommer superstructure, Jumo curtainsider * Dimensions: L 7.29m x W 2.90m x H 2.48m * Lateral loading height 2.90m * 50cm side boards * Lashing eyes * Center posts * Edscha cover * Lift roof * Forklift bracket Iijdjzd Ng Eopfx Aa Isc * Wheelbase 5.20m * Air suspension * Lift axle * Tires: Front 355/50 R22.5 - Rear 315/60 R22.5 * Tank 500L * Standard D40 trailer coupling * Safety Pack Classic * Economy Pack Basic * Comfort driver's seat * Climate Pack * Air conditioning * Auxiliary heater * EFH Suitable trailer available Manufacturer: Sommer, registration date .30m, length / 292 height, forklift bracket, portal doors.

Condition: good (used), Year of construction: 2001, sheet width 2520 mm plate thickness 3.0 mm 350 mm Swing beam adjustment 80.0 mm back stop - adjustable ca. 1.000 mm Iiodpfx Aajy Umd Sj Isc Control FM 5.1 B upper clamping bar adjustment 20.0 mm/sek bending speed 37.0 Grad/sek total power requirement 4.5 kW weight ca. 3.250 kg The ideal solution for individual and series production. A modern design with particularly high rigidity. Designed for continuous performance. Features: - Dynamic, powerful electro-motorized folding machine * Upper beam bending beam drive by geared brake motor * Bending beam drive with roller bearings - FASTI CNC control "TOUCH" - FM 5.1 B * Swiveling control unit, front right * 11.3" color LCD touch screen display * Manual / automatic mode selectable * Input of actual/target values possible (X axis / angle etc.) * Program memory * Tool memory - CNC electro-motorized back gauge * with rear sheet support surface - CNC electro-motorized folding beam adjustment - 1x extra set of FASTI split scribing tools - height : 120 mm - EMERGENCY OFF button at the front, with extension cable - 1x free-moving double foot switch - 1x free-moving foot switch - original operating instructions - Smallest bending leg length in mm to sheet thickness : * 7.0 mm with 0.75 mm sheet thickness * 8.5 mm for 1.00 mm sheet thickness * 12.0 mm for 1.50 mm sheet thickness * 16.0 mm for 2.00 mm sheet thickness * 19.5 mm for 2.50 mm sheet thickness * 25.0 mm for 3.00 mm sheet thickness

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Iijdjza D Eijpfx Aa Isc Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: used, Max. bending length: 2040 mm Isdpfx Aey T H N Soa Isic Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg

Condition: used, Max. Blechstärke: 1.25 mm steel Iiedpfx Aehlnv Hoa Iec Roller center distance: 63 mm

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Iisdpfxjq T Ud Se Aa Iec Weight: approx. 650 kg

Condition: used, Year of construction: 1993, Max. cutting length: 4000 mm Max. sheet thickness: 4 mm steel Controlled rear stop up to 1,000 mm side stop and table extensions cut length limit cut edge illumination safety fence, roller with safety switches Weight: approx. 8500 kg Iodpfof Nwvfsx Aa Ioic

Condition: used, Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet metal holding Side stops and table extensions Iiodpfx Aaow Hygds Isc cutting length limitation Cutting edge lighting Weight approx. 7500 kg

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm Iedpfx Aaed Ha E Ae Ijic coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm Iedpfxszb Emds Aa Ioic - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1978, strip width: 200 - 1.500 mm strip thickness: 0,4 - 2 mm Iisdpfx Aaegnc H De Iec coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request Iiodpey R S Eajfx Aa Ioc

Condition: used, Max. bending length: 1270 mm Max. Blechstärke: 2.25 mm steel Polished bending rail Manual rear stop Good condition 1200 kg Iiedpswlp Syefx Aa Iec

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm Iiedpfx Aocxxq Eja Ioc total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Iedpfx Aashmmfko Ieic Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Iodpfxottc Uaj Aa Ioic

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg dimension machine xH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius Iiedju Ibzwjpfx Aa Ioc - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Ijdpfx Ashtq N Nja Ioic Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet metal width: 3240 mm Sheet metal thickness: 2.5 mm Iodey Tn Ddspfx Aa Ieic

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Iedpfxjy Twfqo Aa Isic Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: used, Year of construction: 1993, plate thickness max. 3 mm distance betw. rolls 125 mm throat max. 500 mm weight ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt incl. 1 pair of rolls Iiodpjy Iha Uefx Aa Ioc Forward/reverse operation via foot switch