Used Ex-Cello Ex-Cello Xk 275 Cold Rolling Cell for sale (16,623)

Condition: used, Year of construction: 2003, Ex-Cello XK 275 Cold Rolling Cell comprising Ex-Cello XK 275 cold rolling machine (2003) 45 kW drive power 1,000L hydraulic tank capacity 1,950mm maximum slide stroke 1,400+330mm or 915+815 mm maximum bar length 60mm maximum profile outside diameter 175mm maximum profile width 0,3 2,0m gear module range 56mm maximum workpiece diameter Lodsz Stlmopfx Akwoah 800mm maximum workpiece lenght Felsomat FZ250 infeed and outfeed system (2003)

Condition: used, Year of construction: 1960, centre distance 1200 mm Lajdpjx U A Igofx Akweh 550 weight of the machine ca. 2,5 t

Condition: ready for operation (used), functionality: fully functional, L & Z Spindle Lathe / EXCELLO DLZ 500 SL x 3 Meter Turning Length - MACHINE IN WELL-MAINTAINED ORIGINAL CONDITION - Center height 250mm - Distance between centers 3000 mm - Turning diameter over bed 500mm - Turning diameter over cross slide 310mm Lodpfx Akezwwf Aoweah - Bar capacity 65 mm - Spindle speeds 28 - 1400 rpm (geared) - Automatic longitudinal / facing feeds - Thread cutting / Metric / Inch etc. - 3-jaw chuck 250mm - 4-jaw chuck 250mm - Multifix base with inserts - Steady rest - Work light - Tool cabinet - Documentation Dimensions: L x W x H 5.5 x 1.4 x 1.6 meters / Weight 3800 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK, table load: 400 kg, spindle speed (max.): 16,000 rpm, number of axes: 4, This 4-axis EXCELLO XHC 241 M/3 was manufactured in 2003. It features a maximum spindle speed of 16,000 RPM and a 500 mm pallet with a maximum load of 400 kg. The machine is equipped with a 120 station automatic tool changer and offers rapid traverse rates of up to 120 mm/min. If you are looking to get high-quality machining capabilities, consider the EXCELLO XHC 241 M/3 horizontal machining centre we have for sale. Contact us for further details. • Pallet size: 500 mm • Pallet change time: 7 s • ATC capacity: 120 stations • Spindle taper: HSK-A63 • B-axis: 360,000 positions, 0.001° increment • Feed rate (X/Y/Z): up to 120 mm/min • Rapid traverse (X/Y/Z): 120 mm/min Lodpoy Ry Hlsfx Akwoah • B-axis rapid traverse rate: 100 (unit not specified)

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW Lodpfx Aez E Ra Hskwoah Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Lasdpefnk Ehsfx Akwjh Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Ledpfxjuxmlio Akwsah

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT. Lajdpfx Akjg Ryqkjwjh

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl Lasdszdk Ikepfx Akwjh centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Ljdpot Hw D Dofx Akwsah Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Laodpfx Aouz If Nekwjh Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any Laedpfep E Efvox Akwsh work roll diameter: 80 mm

Condition: used, Year of construction: 2018, Rollen-Laminiergerät - Roll Laminator GBC Ultima 65Year 2018 - Serial-No. PGG0734 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Lodsmk Nc Dopfx Akweah Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 685mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 889 x 355 x 533mm Weight 62.4 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2018, Rollen-Laminiergerät / Roll Laminator Cold/Hot GBC CATENA 35Year 2019 - Serial-No. PCG0226 Formatbreite / Size width max. 650mm Heiß-/Kaltlaminierung / Hot and Cold laminationSpecifications Operation Mode Roll film laminator Heating System 2 heated rollers Laminating Speed (variable) max. 3000mm/min Max. Pouch Thickness max. 2 x 250 micron rolls Photo friendly Warm up Time 10min Power Supply 220/240 V/AC Laminating Thickness max. 6.0mm Laminating Width max. 330mm Anti-Jam Technology Manual Reverse Approx. lamination time (A4) 6 secs (A4 75 microns) Dimensions (WxHxD) 685 x 330 x 457mm Weight 37.8kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Laedpfx Akjmk Nc Iswsh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Thread rolling machine, cold rolling machine, thread forming machine, profile rolling machine Manufacturer PEE-WEE, Type P 24 Q Serial No. LC2403099, Year of manufacture 2004 Rolling force, max. 24 tons Tool diameter, max. 200 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Receiving length, tool length, max. 180 mm Workpiece diameter, max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 RPM Hydraulic motor power approx. 3 kW Rolling drive motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Swiveling rolling spindle for thread through-rolling - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons Good condition Plunge rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The thread length is a maximum as long as the rolling tools are wide. Through-rolling tools: If the thread length is greater than the rolling tool width. Through-rolling tools have 3 sections - the inlet, the calibrating section, and the outlet. Grooved rollers have no pitch and are swiveled with the helix angle of the profile to be rolled. Lsdjh A S Htjpfx Akwsah Helix rollers differ from grooved rollers by having a pitch in the profile. The sum of the helix angle and the swivel angle results in the helix angle in the workpiece.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv Lodpfx Aksd Nw Ttswoah

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0027 Lasdpj Ad Hcnjfx Akwoh - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm Laodpsp E Ed Rofx Akwjh roll core for rolling rings: 190 mm

Condition: used, This listing is for Genomix GCG-SR-1 10X Next Gen Single Cell Controllor The unit is in full working condition and ready for immediate use This advanced single cell controller provides precise fluidic control for high-throughput genomic sequencing and analysis workflows Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Ljdpszghrlefx Akwoah Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Lasdpfxop E Egle Akweh working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Ljdpoyw N Irsfx Akwoah Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Note: The door on the right pallet station is jammed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0047 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. Ljdpfj Ad Hcusx Akwjah A second identical machine is also available. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request.

Condition: like new (used), Year of construction: 2014, operating hours: 3,103 h, load capacity: 1,600 kg, lifting height: 7,850 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: LINDE R 16 - Lajdpszuuf Iofx Akwjh Mast: 3F7850 ID: 25021.5418 Category: Used Mast: 3F7850 Lowered height: 3200 mm Lifting height: 7850 mm Capacity: 1600 kg Year: 24 Hours: 3103 hours Battery: 48v / 620ah - 28 Options: - Air-suspended SEAT with heating!! - Cold store specification (COLDSTORE) - Blue warning spot (BLEU spot)

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Lasdpfeyfqvfsx Akwsh Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Engine displacement: 12,809 cc Please contact Tobias Ebert for further information.

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Ljdpfx Akjy Eyy Ujwjah Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers