Used Erowa Easy Change for sale (18,321)

Condition: excellent (used), Number of paletts 10 Carrying force 40 kg Working range 1260 x 70 mm Misc. accessories Pgodpfx Acjwhlgrs Aot MARCELS MASCHINEN AG

Year of construction: 2007, condition: ready for operation (used), overall weight: 1,300 kg, number of axes: 3, This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details. Pgjdpfxozcdwdj Ac Ajt • Maximum Load Capacity (Magazine): 1500 kg • Magazine Plate Type: MTS 400 • Magazine Capacity: 6 Positions per Level • Maximum Load per Level: 1500 kg • Maximum Load per Position: 250 kg • Maximum Transfer Weight (RCS 5): 250 kg • Maximum Transfer Weight (RCS I): 130 kg • Required Coupling for Loads >130 kg: RCS 5 Coupling with RCS 5 Gripperlink ER-038622 • Supply Voltage: 3 × 400 VAC ±10% / 3 × 208 VAC ±10% / 3 × 480 VAC ±10% • Frequency: 50/60 Hz • Power Rating: 710 VA • Nominal Current: 1.8 A • Fuse Protection: 10 ATT • Service Socket Voltage: 230 VAC • Minimum Pneumatic Pressure: 5 bar • Minimum Air Consumption: 200 l/min (Nameplate) • Pneumatic Air Quality: Dry, Oil-Free • X-Axis Travel: Type Dependent • Z-Axis Travel: 75 mm • M-Axis Rotation: 360° • Z-Axis Drive: Pneumatic • M-Axis Drive: Electric • Net Weight: 1300 kg • Interface Type: EROWA Standard Interface • Communication Interface: RS232 • Optional Communication Interface: RS422 • Interface Connector: 72-Pin Harting Connector • Communication Protocol: EROWA EWIS Protocol • Alternative Communication Protocol: EROWA Standard Protocol • Robot Door: Pneumatic Door Valve Kit • Pneumatic Connection: Standard • Electrical Connector: Harting 6-Pin (230 V) • Electrical Connection: 230 V (Phase 1 + 2) • Machine Condition: No Longer Connected to Power • Viewing: Available

Condition: used, EROWA UPC clamping system – pallet holder Pgsdpfjzpxkdex Ac Aot ER 016093

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Half-turn staircase, left + right. Pgjdpfx Ajzhhl Iec Aet A complete staircase can be stored on a Euro pallet.

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Pgjdpjz Dvi Rjfx Ac Aet Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: used, This listing includes 3 combination steam ovens, convection ovens from the manufacturer Convotherm, type OGS 20.20, gas-fired version without a boiler, manufactured in 2008. Offers for export in a package are preferred. Our ID Nos. 9361 + 9362 + 9363 The units are set for natural gas; they can also be converted to propane gas. The combination steam oven is equipped with a loading trolley for 20 x 2/1 GN containers or 40 x 1/1 GN containers and with insert racks for 2 x 1/1 GN containers. The units are sold in a package, without inspection and warranty, as returned by the customer. Inspection work will certainly need to be carried out for a new start-up. All 3 combination steam ovens are functional, and videos can be provided. The core temperature sensors are in good condition, and a door lock is included because one is no longer functional. Wiring diagrams and documentation are included. The units were exclusively used for heating/regenerating frozen ready meals. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional refurbishment/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 Pedpfx Aezvd H Dec Aogt Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Inserts: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Further details: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (symbol) for quick selection of defined cooking programs Tray Timer / staggered loading Start time preselection in real-time mode Night baking Delta-T cooking (multi-point core temperature sensor required) Cook & Hold Programmable with 250 cooking programs, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking programs Disappearing door: more space and safety Double-glazed door with integrated door locking position Antibacterial door handle with ventilation position and safety function Door handle with automatic closing function Motor brake when opening the cooking chamber door: less steam release Fan with autoreverse function Hand spray with infinitely adjustable settings Multi-point core temperature sensor Height-adjustable device feet Simple operation via menus/icons Bright graphic display Digital rocker switch for easy setting of temperature, time and core temperature Modular processor control with clear display and module self-test RS232 interface Storage of all device settings and cooking programs in an additional memory module Permanent self-diagnosis for error detection System with full-text error description Safety program mode: the device can be operated with limited functionality Basic prison version Robust design in stainless steel Seamlessly welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic seal Cooking chamber lighting with shatterproof glass cover Including loading trolley with condensate collection tray Subject to change and errors. The sale is exclusively subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Precision machining center HSC 30 linear 5 axes Siemens 840D Travel range X/Y/Z 320 /300 /280 mm B-axis: +/- 120° C-axis: 360° Rapid traverse rate 50 m/min Spindle speed range 0 - 40,000 rpm AC main drive with 19.5/15 kW and 16/12 Nm Incl. spindle cooling and rotary union Tool holder HSK-E 40 according to DIN69893 Linear axis drive package Tool magazine, 30 positions, double gripper Pgsdpfezlhmmex Ac Ast Active cooling unit for main spindle and linear drives Direct absolute linear encoders 3D control Quick-change system EROWA ITS 150 Measuring probe Blum TC 52 Blum laser Interface for handling system EROWA IKZ 40 bar Electronic handwheel Coolant gun Compressed air Production package EROWA Robot Compact 80 50 pallet positions for ITS 148

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change Psdpfx Asykubiec Asgt ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2009, condition: used, General information Field of application: Freight transport Drivetrain Make of engine: Honda Functional Lifting capacity: 2 kg History Pgjdoz Ehv Eopfx Ac Ast Number of owners: 1 Condition General condition: good Technical condition: good Visual appearance: good Other information Latest inspection: 2026-04-24 Production country: DE Additional information Please contact Michael Overmeer for more information Paus 25 WH Easy Big lift construction year 2009 from the first owner (rarely used and always stored inside) Lift is in a nice condition and has among other things: powered by a Honda petrol engine, last technical inspection and maintenance 04-2026. Changes and writing and typing errors reserved.

Condition: excellent (used), Hallo, Pgodpfx Aeiqunwsc Aet Wir bieten hier kurzen Erowa Kontrolldorn kurz an. ER-008617. Mit diesem lässt sich der Rundlauf und die Achse ausrichten.Passend für Spannfutter 50 +100. Bei Rückfragen stehen wir gerne zur Verfügung .

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Pjdjzbybiepfx Ac Asgt Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Pgodpfsvtcvijx Ac Aot Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Podpfxjtbawke Ac Asgt Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Hydraulic thread cutting machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread: M 5 - M 24 Working range 2050 Rmax. Pgsdpfx Aekhmgijc Ast Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic thread cutting machine Incl. machine base with clamping plate Mobile Hydraulic pressure gauge Stepless speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Psdpoykudkofx Ac Aegt Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Pedpfx Acexuh Ddo Aogt

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable Pgedpfx Acjykty De Ast F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy Psdjykua Sspfx Ac Asgt TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 37 kW (50.31 HP), input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, pressing force: 220 t, stroke length: 200 mm, operating speed: 21 mm/s, reverse speed: 200 mm/s, table width: 120 mm, table length: 4,270 mm, table height: 900 mm, throat depth: 400 mm, ram plate length: 4,270 mm, distance table to ram: 400 mm, clearance between the columns: 3,820 mm, oil tank capacity: 350 l, total length: 5,370 mm, total width: 2,160 mm, total height: 3,275 mm, overall weight: 16,950 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic press brake LVD EASYFORM-10 220/4270 Touch-B Year of manufacture: 2010 Serial number: 33189 Technical specifications Force: 2200kN Working length: 4270mm Distance between uprights: 3820mm Stroke: 200mm Distance table – ram: 400mm Gap: 400mm Turbo: PP5400 Approach speed: 120mm/s Working speed: 21mm/s Return speed: 200mm/s Weight: 16950 kg Motor: 37kW Oil capacity: 350 COMMAND CONTROL TOUCH-B • Table PP8170 V-axis • EFL 90/130 • Top tool clamping PP3090 – Wila • Back gauge X600 X’ R Z1 Z2 PP8096 • Safety: CE PP3580 – laser-safe • PP1115 manual front support: 2pcs • T-axis Heavy duty 200kg Pjdez Eqwljpfx Ac Ajgt

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 13600 € Pgedpswiryhsfx Ac Aet 261.12 € 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: as good as new (ex-display), Year of construction: 2026, The compelling advantages: Space-saving, compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area due to air guide plates – making it suitable for larger workpieces. Separation rate of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Easy and quick filter replacement on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan including throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² of filter area) due to the folded filter pockets than conventional filter mats. The downstream fiberglass secondary filter only captures the finest remaining particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only after every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors on the floor or from floor pits. Due to this additional intake opening facing downwards, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also simplifies filter replacement here. Standard extraction capacity Easy Paint 7000 Article number 600027 Air flow rate with standard delivery * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Pgododqc U Hepfx Ac Ajt Motor power 400V/50Hz 2.5 kW ex 2-pole Connection nozzle extraction hose D = 355 mm Width in mm 2845 Overall height in mm 1955 Depth in mm with capture area 1015 Weight in kg 180 Location: In stock in Bitburg Exhibition machine at a special price.

Condition: excellent (used), Year of construction: 2010, the complete Tetra Pak volume conversion kit A3 Flex 200/250 ml Square, version machine 100/150. Packed into original wooden Tetra Pak boxes. Excellent condition. Pgsdpof Th Sxjfx Ac Ajt Location - Poland

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark Metal Analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of datasets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional In like-new condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grid/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples A groundbreaking spark excitation and optical design to ensure the best performance in its class An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both new users in production and experienced laboratory staff The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Podpfx Aceziar Ns Asgt Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. W x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring Pjdpfxjx D Hvqo Ac Aogt

Condition: excellent (used), functionality: fully functional, We are offering a used EROWA UPC chuck for sale. EROWA ER-026229 UPC chuck UPC collet set, 82/82 mm through-hole (special version) Year of manufacture: 2023 New price: €9,940 The chuck is in very good condition and fully functional. Pedpfxjzw D E Nj Ac Ajgt Inspection possible by appointment. Shipping and inspection are possible!