Used Endress Heating System, Heater, Wood Chip Heating for sale (54,068)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, heating capacity: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed with ash discharge Njdpfeznca Hox Abyedc with control

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Nedpfx Abjyhlrmsyjdc

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Ndedpfj Aba Rgjx Abyoc Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: used, Motan DH-1 N-A/B – Portable Continuous Flow Water Heater You are purchasing a fully functional continuous flow water heater from Motan. This unit comes from Bundeswehr (German Armed Forces) stocks and is in very good condition. Versatile for various applications, e.g., as a pool heater. It’s the perfect solution for quickly heating swimming pools. A 100 m³ swimming pool can be heated to 30°C in just 3 hours. You won't find a faster way to heat the water. Perfect for use anywhere where there is no electricity available. Camping sites, weekend houses, construction sites, and camping. Its effective output is continuously adjustable from 40.5 kW to 128 kW. Despite its high output, the unit is still portable, weighing only 130 kg. Since the water temperature can be set freely within the range of 30°C to 90°C, the unit can be used in many ways, e.g., as a hot water generator for camping shower facilities, for hot water production. Also perfect for Koi ponds. Technical data: Njdpfx Abeulgh Noyodc Output: 35,000 kcal/h to 110,000 kcal/h, continuously adjustable (40.5 kW to 128 kW) Maximum water flow rate: approx. 3600 l/h Water at maximum heating output. With maximum water flow, the temperature increase is approximately 30°C, i.e., with a water inlet temperature of 10°C and a 30°C increase. Increase = 40°C final temperature Drive: Two-stroke engine, Fichtel & Sachs, Stamo 75, displacement: 75 cc Output: 2.5 HP at 4500 rpm Consumption: approx. 1.8 l/h, mixture 1:25 (for the engine!) For the burner, depending on the water flow, max.: 24 l/h gasoline at a maximum flow of 3600 l/h Tank capacity: 5 liters Dimensions: Width: 500 mm, Length: 1040 mm, Height: 850 mm Weight: approx. 130 kg Manufacturer's price: €8,000 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution). Ndodpfx Abeyrhd Teyoc

Condition: used, ApenGroup LRP28DE Gas-fired hot air generator Gas type: G20 natural gas Ndedpfxox Ihlkj Abyec Connection pressure: 20 mbar Nominal heat input QN: 27 kW Nominal heat output: 24.63 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 2700 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Ndsdpfx Abeyalbleyjc

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 110 used wood chip / pellet biomass boiler, supplied with screw conveyor and spring-arm fuel extraction system. Nominal heat output: 110 kW. Water capacity: 320 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Net price: EUR 10,000 including the advertised feeding and fuel extraction equipment. Exact delivery scope and configuration by agreement. Ndjdpfxo Afbqvo Abyec Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 35 used wood chip and pellet boiler, offered with feeding and fuel extraction system. Nominal heat output: 35 kW. Output range: 10.5–35 kW. Water capacity: 114 litres. Ndjdpfx Aj Afbq Nsbysc Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz. Lambda-controlled combustion and automatic heat exchanger cleaning. Net price: EUR 8,000 including the advertised feeding and extraction system. Exact delivery scope and availability by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Neder R Ewlspfx Abyjdc Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Nominal heat output: 48 kW. Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Njdo Afbq Aopfx Abyjdc Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Condition: excellent (used), KWB Powerfire TDS 150 – automatic biomass boiler Used Austrian wood chip and pellet boiler with modulating output from 45 to 150 kW, suitable for commercial, agricultural and industrial heating. Key features: Ndedszqnp Sepfx Abyjc - Moving grate combustion - Lambda-controlled combustion and cyclone combustion chamber - Automatic heat exchanger cleaning - Automatic ash extraction - Wood chips G30/G50 or pellets Factory specifications: - Nominal output: 150 kW - Minimum output: 45 kW - Maximum operating pressure: 3.5 bar - Maximum supply temperature: 90 degrees C - Water capacity: 300 litres - Efficiency with wood chips: 90.4 percent at nominal load In stock. Inspection by appointment. Please confirm the exact scope of delivery and accessories before purchase. Transport and installation by separate arrangement. We also offer wood chip boilers, pellet boilers, wood gasification boilers, feeders, pumps, buffer tanks and heating accessories.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Talbot T150 warehouse wood waste heater will heat a warehouse upto 5000 square feet, excellant condition serviced with Talbots qualified engineers Ndedpfx Ajzc Hkyobyec

Condition: excellent (used), Year of construction: 1995, heating capacity: 200 kW (271.92 HP), We offer a heating system from the renowned Austrian company BINDER. Ndjdpfx Asxalfijbyjc Boiler with a heating output of 200 kW TYPE RRK 150 Stove for biomass, bark, wood chips, and sawdust. Complete set with pumps and valves

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Nodpfxszhh Iie Abysdc Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Nedpfxsyizqnj Abyodc Dismantling must be carried out by the buyer

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Ndodevyrwpopfx Abyoc

Year of construction: 2017, condition: good (used), Spirax Sarco PHS Easiheat Heat exchanger system Ndodpfx Asz I Dv Hebysc 2017, Pre assembled skid mounted packaged heat exchanger system, touch screen control, with Alfa Laval heat exchanger, see plates for all spec

Condition: used, functionality: fully functional, overall weight: 4,000 kg, smoke pipe connection diameter: 200 mm, nominal heat output: 300 kW (407.89 HP), space requirement length: 4,040 mm, space requirement height: 2,250 mm, space requirement width: 5,150 mm, temperature: 95 °C, total height: 2,250 mm, total length: 3,450 mm, total width: 1,250 mm, operating pressure: 5 bar, Equipment: documentation/manual, Gilles HPKI-K 300 industrial wood chip boiler Ndodpfx Abezwkrpjyjc Used Austrian biomass boiler for industrial, agricultural and commercial heating. Technical data: - Nominal output: 300 kW (W40) - Output range: 90.2 to 300 kW - Fuel: wood chips G50 / G100 - Water capacity: 1100 litres - Maximum operating pressure: 5 bar - Maximum temperature: 95 degrees C - Supply and return: DN 80 - Length: 3450 mm - Width: 1250 mm - Height: 2250 mm - Weight: approximately 4000 kg - Flue connection: 200 mm Operating manuals and technical documentation available. Exact scope of delivery, availability and collection by arrangement. Inspection by appointment. A wide selection of boilers, feeders, pumps, buffer tanks and heating accessories is available. Transport and installation are arranged separately.

Condition: used, Year of construction: 2006, functionality: fully functional, power: 37 kW (50.31 HP), filter area: 169 m², total height: 5,950 mm, total length: 4,650 mm, total width: 2,250 mm, For sale is a complete Aagaard/Finnrose industrial dust extraction and filtration system, manufactured in 2006, from a wood processing company. The system is designed as a screw filter and features a complete dust extraction control system including heat recovery. The main fan is an Aagaard AVD 40 HF/240 with 37 kW. The filter system has approximately 169 m² of filter area with a total of 128 filter elements, each approximately 2,000 mm long and Ø 210 mm. The discharge is carried out via a discharge screw and a rotary valve airlock. Under the discharge, there is a suitable hopper with a volume of approximately 6 m³ on a mobile cart, which is included in the scope of delivery. The complete control cabinet for the dust extraction control and heat recovery is part of the system. The control cabinet includes, among other things, the controls for the rotary valve airlock, discharge screw, and four cleaning groups, as well as a Schneider-Electric frequency inverter for the dust extraction fan. Technical data Aagaard / Finnrose industrial dust extraction system / screw filter Year of manufacture: 2006 Main fan: Aagaard AVD 40 HF/240 Motor power main fan: 37 kW Filter area: approx. 169 m² Filter elements: 128 pieces Dimensions of filter elements: approx. length 2,000 mm / Ø 210 mm Electrical system: 3 × 400/230 V, 50 Hz Rated current control cabinet: 160 A Njdpfjz Ik Atsx Abyjdc Discharge via discharge screw and rotary valve airlock 4 cleaning groups Complete control cabinet for dust extraction control and heat recovery Frequency inverter for main fan Heat recovery / return air system available 6 m³ hopper on mobile cart included Existing steel substructure can be taken over Extensive existing pipelines available by agreement Dimensions Filter tower including rotary valve airlock: approx. 5,950 × 2,280 × 4,632 mm (L × W × H), height from the steel substructure. Steel substructure: approx. 5,500 × 2,800 × 2,250 mm (L × W × H from the ground). Total height of filter tower including substructure: approx. 6,882 mm. Availability / Dismantling Sale possible immediately. The system is located at CH-3608 Thun, Switzerland. The complete dismantling and removal must be completed by 31.07.2027 at the latest. Dismantling, loading, transport, and any customs clearance will be carried out entirely by the buyer at his expense and responsibility. All required specialists, lifting equipment, cranes, and means of transport must be organized by the buyer. Inspection possible by arrangement. Sale from the location in its current condition. Technical data provided to the best of our knowledge, without guarantee; inspection by the buyer before purchase is recommended. Selling price: 24,500 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, ESTA Spänesog-SB 8151 Chip Extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g., during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Ndsdpfx Absznibwsysc Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Reznor UDSA Gas-Fired Air Heater, 54.74 kW, Heating Capacity 5830 m3/h UDSA Gas-Fired Air Heater – Efficient, Even at Peak Performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures uniform air distribution in industrial halls. This air heater, which is easy to install, is available in 14 sizes ranging from 7 to 97 kW and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the hall, as standard. The UDSA gas-fired air heater from REZNOR ensures uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-Fired Air Heater. The advantages: Efficiency of over 92% The device is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. The gas-fired air heaters are suitable for: - Natural gas or liquid gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation° control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via the roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas-fired air heater type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Ndjdpfjwb A Hiox Abysc Intended use: DE Gas category: I2ELL Gas type: G20 Natural Gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. rated heat input (Hs) QN: 66.04 kW Max. rated heat input (Hi) QN: 59.50 kW Min. rated heat input (Hs) QN: 33.02 kW Min. rated heat input (Hi) QN: 29.75 kW Max. rated heat output: 54.74 kW Min. rated heat output: 26.92 kW Connection voltage: 230V 1N, 50Hz Air volume flow: 5830 m3/h Protection class: IP20 Part No. 0461BN0677 More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, This listing is for the Eppendorf thermostat C Dry Block Heater The unit is in full working condition and is ready for immediate release Description Peltier technology enables comfortable and precise temperature control from -10°C to +110°C Heating and active cooling in all common vessel and plate formats from 5μL to 50mL Precise maintenance of various temperature levels Reliable prevention of condensate formation with optional ThermoTop™ (tect™) lid Highly flexible due to large selection of exchangeable SmartBlocks Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4, 16, 37, 56 and 95°C) Individually store up to 15 programs Comprehensive range of program functions Eppendorf Thermostat C is the ideal device to accurately set and maintain temperatures. The ThermoStat C features excellent temperature management. Peltier technology provides the comfortable and precise temperature control of all conventional lab vessels. The operation is easier and more intuitive than ever before. Predefined temperature keys provide quick access to five important experimental temperatures. Due to comprehensive program functions, you can also individually store 15 programs. With an extensive range of exchangeable SmartBlocks, the ThermoStat C adapts to any application. Key Features Heating and active cooling in all common vessel and plate formats from 5 μL to 50 mL Excellent temperature management Precise temperature control from -10°C to 110°C (110°C can be set when using the 12 mm and cryo SmartBlocks.) Precise maintenance of various temperature levels Nedpfoxwc Nmox Abyedc Reliable prevention of condensate formation with the optional ThermoTop® (tect) lid Maximum flexibility thanks to large selection of exchangeable SmartBlocks™ Dry incubation for improved lab hygiene Simple and intuitive operation due to predefined temperature keys (4°C, 16°C, 37°C, 56°C and 95°C) Comprehensive range of program functions 2 second block exchange due to quick release system of SmartBlock

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready Ndjdpox Ihiiefx Abyjc These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Condition: used, This listing is for the Grant QBD2 Dry Block Heater The unit is in full working condition and is ready for immediate use The QBD2 Grant block warmer is a versatile, general purpose dry block heating system with 2 custom made blocks Ndsdpfxjxv A R Ie Abyec The Grant QBD2 is a high-performance digital dry block heater designed for accurate and consistent sample heating in a wide range of laboratory applications. Ideal for molecular biology, clinical, and general lab use, it offers flexibility with interchangeable blocks and customizable features.