Used Davis Standard Ds-25/Standard Ds-20 for sale (51,899)

Condition: ready for operation (used), One complete and one partially dismantled extruder system Davis are available. 1) Davis Standard DS-25, power: 6385W, max. melt pressure: 700bar, max. temperature: 315°C. Including 4x screws, 6x bursting discs, Digicolor dryer, platform, screen changer with heating and sealing pack, new cylinder, 3x screw seals, and spare drive motor. 2) Davis Standard DS-20, power: 4500W, max. operating pressure: 700kg/cm², max. temperature: 315°C. Including Conair dryer, 3x screws, screen changer with heating and sealing pack, cast housing, extrusion tool, and spare drive motor. General accessories: various ring heaters, 3x Eurotherm temperature controllers, and 3x Eurotherm pressure sensors. Documentation available. An on-site inspection is possible. Rodpfx Afsxn S Umjnst

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Rjdpfx Asfrzrlofnet -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

Condition: used, fuel type: electric, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders Rjdpjizc Dbefx Afnst -Manufacturer: GSL (German Standard Lift), hydraulic cylinder double-acting stroke 250 mm -Type designation: D063032AA20250 -Piston rod: Ø 32 mm -Recording. diameter 30 mm -Dimensions: 500/75/H120 mm -Weight: 10 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 180 mm -Piston rod: Ø 125 mm -Pipe outer diameter: 210 mm -Stroke: approx. 350 mm -Pressure force at 180 bar: approx. 45 tons -Total length when retracted: 860 mm -Hole diameter: Ø 65 mm -Ideal for building a hydraulic press -Number: 2 cylinders available -Price: per piece -Dimensions: 200/280/H860 mm Rsdjcgtyqepfx Afnet -Weight: 150 kg/piece

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 770 mm, total length: 1,220 mm, total width: 500 mm, Tested forklift battery for your forklift - 48V 6PZS 930Ah - DIN C + 1 year warranty + includes Aquamatic filling system + includes end discharge cables & REMA 320 plug (other plug types can be installed upon request) Rodpewzv Awsfx Afnot + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 500 mm Height: 770 mm Weight: approx. 1,350 kg Compatible with the following models and others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 16 - 1120-00 Linde R 16 - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R. 20 - 1122-00 Linde R 20 F - 8923-00 Linde R 20 F - 8923-00 - side battery change Linde R 20 G - 1120-00 Linde R 20 G - 1120-00 - front battery change Linde R 20 HD - 1120-00 Linde R 20 HD - 1120-00 - front battery change Linde R 20 W - 1120-00 Linde R 20 W - 1120-00 - front battery change Linde R 25 - 1120-00 Linde R 25 - 1120-00 - front battery change Linde R 25 F - 8922-00 Linde R 25 F - 8922-00 - side battery change Linde R 25 F - 8922-00 - vertical battery change Linde R 25 F - 8923-00 - side battery change Linde R 25 F - 8923-00 - vertical battery change Linde R 25 W - 1120-00 Linde R 25 W - 1120-00 - front battery change Still FM 20 Still FM-X 20 Still FM-X 25 Jungheinrich ETV 214 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV 460 Toyota/BT VR 1.25 Toyota/BT VRE 150 Crown ESR 4000-1.6 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5260 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UHX 200 Caterpillar NR2042H Caterpillar NR20NH Caterpillar NR25N2X Hyster R2.0H Hyster R2.0HD Hyster R200HD Mitsubishi RB14-25 Mitsubishi RB20NH Yale MR 25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - DIN A + 1 year warranty + Includes Aquamatik filling system + Includes end cell connector & REMA 320 plug (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Rjdpfxowzvzyj Afnot Weight: approx. 1,210 kg Suitable for the following models and others: Linde E 16 P - 386-02 - side battery change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - overhead battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Other common battery sizes available on request. Transport possible.

Condition: used, Year of construction: 2002, operating hours: 2,376 h, machine/vehicle number: 2103736, fuel type: diesel, Empty weight: 14.800 kg Lifting capacity: 1.000 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Rsdpfx Ajyrl Ucofnet Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 5.74x2.55x4.1 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2001, operating hours: 5,358 h, machine/vehicle number: 012722, fuel type: diesel, Empty weight: 14.800 kg Redpfoyqmr Hsx Afnst Lifting capacity: 1.000 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: BKT Transport dimensions (LxWxH): 5.74x2.55x4.1 Please contact PFEIFER GROUP for more information

Condition: used, fuel type: electric, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting -Type: Stroke 20mm -Piston rod: Ø 18 mm -Recording. Ø 16/8 mm -Number: 2x cylinder available -Price per piece -Dimensions: Ø 50 x 260 mm Rodpfoizc Dqex Afnjt -Weight: 3 kg/pc.

Condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece Rsdpfx Afofuw Irjnot

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 8/77 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 44 -Brake: 220 V -Price: per piece Redpfx Afect Er Esnot -Number: 1x available -Dimensions: 590/200/H270 mm -Weight: 36 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 Rsdsxpqm Rjpfx Afnst 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts: 1 x 20 foot centered (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container lock in the longer version 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Side collision protection Aluminum underride guard Half-shell mudguards with anti-spray flaps according to EG VA drip tray with 1 1/4 inch drain pipe + 1 1/4 inch stopcock, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between drip tray and side member 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) with rubber seal all round, with drain hole at lowest point, then without cover on hose pipes 1 stainless steel earthing lug at the rear in FR on the right of the frame, with international earthing sticker on the frame, Steps at the rear right on the underride guard, at the rear in FR right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide, Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Operating instructions Rodpfsi Rixkox Afnet The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of approval / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Approval according to ADR acc. to 9.1.1.2 of ADR, EX/II, EX/III / certificate of approval for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign at the rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Contour marking with refle

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm Rsdpfx Afjy D I Hyjnot -Weight: 24.5 kg

Condition: ready for operation (used), Year of manufacture: 1988 / Overhauled in 2019 by HYDAC Accessoirs with a completely new control system Load capacity: 2,000 kg Table diameter: 1,500 mm Band width: max. 100 mm Band thickness: 0.3 – 1.0 mm Maximum coil height (incl. pallet): approx. 850 mm Number of pinch rollers: one pair Weight: approx. 2,200 kg Dimensions: approx. 2,600 x 2,100 x 1,700 mm Execution/features: Rsdjy Hlgpepfx Afnot • Sturdy welded frame construction • Coil hold-down plate • Large band deflection roller • Deflection roller and pinch rollers hydraulically height adjustable • Motor-driven pinch rollers with lateral band guide and roller cage • Deadman switch for safe band threading during setup operation at safe speed • Direction of operation (forward/reverse) selectable via hand switch • Continuously adjustable pulling force via potentiometer • Loop control system • Free-standing control cabinets with operator panels

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Rodpfx Afev Htnijnot Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Rsdpjiv H Eksfx Afnst Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Rodpfohx Elfex Afnst Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: new, functionality: fully functional, Charger Condition: New device Technical condition: New Redpfxoywpmbj Afnot Description: High-frequency charger available in the following capacities: 24V 30A, 24V 25A, 24V 20A, 24V 15A, 24V 10A. If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist with leasing & financing solutions as well as delivery at favorable terms. Trade-in of Linde equipment is also possible—even if you don’t purchase a device from us. The operating hours indicated were read off at the time of listing. Subject to prior sale, changes, and errors.

Condition: used, This listing is for 1 of 2 Zeiss Standard 20 Microscope Rodpfxexzh Tfo Afnst

Condition: ready for operation (used), Year of construction: 1970, LZ-Lathe KERN Type:DS 20 AL Year 1970 with 3 jaws lathe chuck Forkardt 250mm, tool quick winder holder Rjdpfx Asgqxciefnet Multifix size C with holders coolant device. turning diameter overbed:500mm turning diameter overplane : 250mm centre distance : 1000mm spindle speed: 12 -1200U/min Machine can be demonstrated under current Good guides .

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling unit (glycol) | 2019 2x 28kW Glycol tank Hot water tank 6x Fermentation tanks | 2760l | 2019 3 bar, insulated with jacket cooling, CIP capable 12x Storage tank | 2760l | 2019 3 bar, no cooling, were in a separate cold room Reverse osmosis Compressor | JAN | 585l/ min | 2020 KEG filling 1x drum washer with automatic caustic refill and steam-heated 1x keg filler Up to 70 barrels/ h, Fitting: Type S, basket fitting, Siemens S7 Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc. Rsdsyb N N Aepfx Afnjt

Condition: good (used), Year of construction: 1987, fabric-no. 202 395 Rodpsq Awh Rsfx Afnst working length 2550 mm output 2000 KN tracking travel 13 mm safety distance 176 mm

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Rsdpfxsuddh As Afnjt Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Condition: used, machine/vehicle number: 006064, Squaring: First and Second Pass Max Panel Thickness: 85 mm Rjdpolw A D Tefx Afnst Max feed speed: 26 m/min Distance between dogs: 1000 mm