Used Cts Temperature Test Cell Walk-In Test System for sale (52,455)

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Iijdpfxovb Hanj Amiob - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Iodpfx Ajvb E Uqemijib Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Iiodpfx Aeylxaxomieb

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Ijdsylmamopfx Amioib Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock test system Working climate area Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions Width 1100 mm Height 2300 mm Depth 2300 mm Test chamber dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg Iiodjtqcu Espfx Amijb The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Ijdpfx Aotrf Ulsmioib Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. Iisdpoyx E D Eefx Amijb A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Condition: excellent (used), ESPEC ARS-0680-AE Environmental Test System Type: ARS-0680-AE Manufacturer: ESPEC Design: Environmental Test System with external stainless steel test chamber For sale is a complete ESPEC Environmental Test System for temperature, climate, and automotive testing applications. The system consists of two ESPEC climate test chambers type ARS-0680-AE and an external stainless steel test cell mounted on a mobile frame. The external stainless steel chamber serves as the primary test space for larger samples such as vehicle headlights, lighting modules, electronic components, or automotive assemblies. The two ESPEC climate test chambers generate the required temperature and climate conditions for the external test cell. Condition / Display: Used system, optical condition as shown in the pictures. Both units display STOP / ready for operation. Operating hours according to displays: Approx. 5,887 h Approx. 6,950 h Iodpfx Aey H H Uhemioib Special feature: Complete environmental test system with external stainless steel test cell. Especially suitable for complex testing applications with larger or externally connected test pieces. Technical Data of Climate Test Chambers: 2x ESPEC ARS-0680-AE Year of manufacture: 2017 / 2018 Test chamber volume: approx. 680 liters each Temperature range: approx. -70 °C to +180 °C Humidity range: approx. 10 % to 98 % r.h. Temperature change rate: up to approx. 4–6 K/min Internal dimensions (W x H x D): approx. 850 x 1000 x 800 mm External dimensions (W x H x D): approx. 1050 x 1955 x 1805 mm Electrical Data: Connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 22–27 A Weight: approx. 505–615 kg per unit Cooling System: Air-cooled cascade refrigeration system No external water connection required Refrigerants according to type plates: R23 – 0.65 kg R452A – approx. 2.1–2.3 kg External Stainless Steel Test Cell: External remote test chamber on a mobile steel frame Large test space for bulky specimens Interior made of stainless steel Front opening with all-around seal Several toggle latches Side feedthroughs / connection ports Shelf / test tray provided Heavy-duty casters Equipment: 2x ESPEC climate test chamber ARS-0680-AE External stainless steel test cell Touchscreen control panel Program and constant operation Temperature and humidity operation Observation window Stainless steel test chambers Interior lighting / chamber lamp Side tube and cable feedthroughs Ethernet interface Specimen temperature input Power supply control for specimen Time signal outputs Water tank system for humidity operation Mobile design Scope of Delivery: 2x ESPEC climate test chamber ARS-0680-AE 1x external stainless steel test cell on mobile frame Available connection cables / accessories as present Available documentation as present Scope of delivery as shown Note: This is a customer-specific special test system. The two ESPEC climate test chambers and the external stainless steel test cell belong together and are offered exclusively as a complete system. Service / Preparation: Functional check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leak test with certificate Documented test run Miscellaneous: Inspection possible by appointment Loading can be arranged Commercial sale – Sold without warranty. (Subject to changes and errors)

Year of construction: 2024, condition: new, This battery filling system is suitable for traction batteries with 12 cells, 24 volts. Price is excluding VAT. Also in stock: battery filling system 24 cells, 48 volts --> 319 ex VAT; battery filling system 40 cells, 80 volts --> 389 ex VAT. Iedpfx Amsy Sm Iroijib

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used Iedpfx Aok E Htysmijib Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker, SPA30KCE power amplifier, IMV K2+ control system, and CTS climate chamber. Ideal for combined vibration and climate testing in industry, automotive, aerospace, as well as research and development. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Type: V850-440 LPT 750C Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 3000 Hz Sine force: approx. 22.2 kN Shock force: approx. 66.7 kN Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload: approx. 350 kg Air-supported and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. power consumption: 38.14 kVA Max. output power: 21.0 kW Control System IMV K2+ Vibration Control System including Dell Precision PC system, monitor, keyboard, and mouse Unlocked functions: Sine, Resonance Dwell, Limit Control, Amplitude Dwell, Multi Sweep Sine, Random, Soft-Clipping, Sine-On-Random, PSD Limit Control, Shock, Scheduler, Multi-Language, Launcher, and System Monitor. CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Rated current: 28.7 A Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Sliding table / mounting table available Program operation possible Completely wired testing system Sliding table: 760 mm x 850 mm Threaded insert spacing: 100 mm Dimensions / Weight Shaker: approx. 1,300 kg Amplifier: approx. 500 – 600 kg Total weight: approx. 6,000 – 7,000 kg Transport exclusively by a suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Specifications may vary. Iijdoy Sy Npopfx Amijb Condition Used system from industrial use. Optical condition see pictures. Inspection possible and desired by arrangement. Scope of supply LDS V850-440 LPT 750C shaker LDS SPA30KCE amplifier IMV K2+ system Dell Precision PC system CTS climate chamber CV-70/1100-5 Sliding table / mounting table Accessories as shown in the pictures Loading possible by arrangement against cost reimbursement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: excellent (used), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Design: Automotive EMC / on-board network testing system Format: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK, designed for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test technology. The system is supplied with a laptop featuring pre-installed control and test software, making it ideal for professional laboratory, development, and test bench use. The system comprises several integrated test modules, cooling fan units, as well as various power, control, and interface components. Visibly identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function according to display: Voltage Drop Simulator Serial number on display: SWN 001638 AutoWave display: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display: DC Supply Waveforms Firmware: V2.02.00 Generator: V2.01.01 Additional model designation (from documentation): VDS 200Q100.2-208 Connections / Interfaces: - Ethernet - IEEE 488 - USB VDS - Frame Bus In / Frame Bus Out - Analog In - AutoWave CH1 / CH2 / CH4 - 0–10 V connection - DC output / output connectors Iedpfjy Rlbhsx Amioib - CEE power plug - Emergency stop switch Features: - Mobile industrial/19" cabinet - Multiple integrated cooling fans - Front control and terminal panels - Rear power and interface connections - Side-mounted emergency stop switch - Industrial-grade build for laboratory, development, and test bench applications Potential application areas: - Automotive test engineering - On-board network simulation - Voltage drop simulation - Electronics and component testing - EMC/EMI laboratory - Research and development - Quality assurance - Test bench and measurement applications Technical notes: - Four-quadrant voltage drop simulator - Suitable for automotive voltage profile testing - Supports various automotive test standards, such as LV 124, LV 148, ISO 7637-2, ISO 16750, and similar standards - Output range per documentation: -20 V to +80 V - Bandwidth up to 250 kHz Condition: Used device with age- and use-related signs of wear. See pictures for cosmetic condition. Unit powers on; displays are active. A full technical function test under load has not been performed. Dimensions & weight: Exact dimensions and weight have not been established. Due to its design as a mobile industrial cabinet, assume corresponding industrial-grade weight. Exact measurements and weights can be provided upon request. Scope of delivery: - emtest / AMETEK test system in a mobile industrial cabinet - Laptop with installed control and test software - AutoWave module - VDS 200Q / VDS 200Q100.2 module - Built-in fan and connection units - Scope of delivery as shown in images Notes: - Inspection possible by prior appointment. - Loading can be arranged. Commercial sale – sold without warranty. Subject to changes and errors.

Condition: new, Year of construction: 2025, power: 45 kW (61.18 HP), motor manufacturer: Yunnei / DEF30CAA5, General information Field of application: Construction Weights Iodpfx Aeuidyvomieib Empty weight: 2.800 kg Functional Generator capacity: 45 kVA Dimensions of cargo space: 250 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 80 kW (108.77 HP), motor manufacturer: Yunnei - DEF47CZAA5, General information Field of application: Construction Weights Empty weight: 2.500 kg Iijdpfx Amouidypeijb Functional Generator capacity: 80 kVA Dimensions of cargo space: 300 x 115 x 200 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 150 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 30 kW (40.79 HP), motor manufacturer: Yunnei / DEF20CFA4, General information Field of application: Construction Weights Empty weight: 2.800 kg Functional Iisdpfxjuidyie Amijb Generator capacity: 30 kVA Dimensions of cargo space: 210 x 115 x 170 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 100 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: new, Year of construction: 2025, power: 20 kW (27.19 HP), motor manufacturer: Yunnei / DEF20CFA4, General information Field of application: Construction Weights Empty weight: 1.350 kg Functional Generator capacity: 20 kVA Dimensions of cargo space: 210 x 115 x 170 cm CE mark: yes Other information Generator: Stamford Frequency: 50 Voltage: 230 Drill equipment: Tank, Battery, Control Panel Water tank volume: 100 l Iedpfxjuidyce Amijib Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Ijdowypqlopfx Amieib Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT model IRC5 / IRB 2400 M2004 Robot milling system with rotary change table and 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB model IRB 2400/16 M2000 ABB IRC5 control unit with Tech-In panel HF milling spindle PERSKE model KRS 35.3-2, power: 1.2 kW, speed: 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot weight: 380 kg Table size (Table 1) with aluminum plate: 500 x 500 mm Table size (Table 2) with Pertinax plate: 600 x 600 mm Iisdsyaq Nuepfx Amieb Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete system is set up as a compact milling cell with a rotary change table - Control cabinet and robot controller cabinet are both compactly and solidly mounted on the milling cell - Motorized rotary indexing table (likely WEISS brand) with fixed indexing step: 2 stations = 180° - Rotary table, rotation angle 180°, with partition wall and two clamping surfaces for fixtures - While one side of the rotary table is being milled, the other side can be loaded with new workpieces in parallel - Front safety guard with light barrier for monitoring during 180° table rotation Space requirement: Length 500 cm x Width 190 cm x Height 252 cm Length with front safety guards: 500 cm Length without front safety guards: 400 cm Weight of milling cell approx. 4,000 kg Very good condition The milling cell was used as a machining center for milling aluminum sheets and deep-drawn aluminum parts. Edge machining, milling cut-outs, drilling, etc. Also suitable for plastic processing or similar applications. If interested, please request a video from us.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled For sale is a CTS temperature shock test chamber designed for thermal cycling and shock testing in industrial, research, and development settings. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection rating: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Iiodpfey I Ntcox Amiob Compressed air connection: 1/4" external thread Equipment: Two-chamber system (hot/cold chamber) Digital CTS controller Display / control panel Program mode Operating hours counter Observation window Interior lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Operating manual available Wiring diagram available Piping diagram available Quick guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as seen in the pictures Scope of delivery as pictured Inspection by appointment possible. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Condition: excellent (used), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of an LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climate chamber. Ideal for combined vibration and environmental testing in industrial, automotive, aerospace, as well as research and development applications. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max. acceleration: 981 m/s² Max. velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-performance switching amplifier Air-cooled industrial version Mains voltage: 415 V Max. power consumption: 86.9 kVA Efficiency: > 90 % Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ vibration control system Multi-channel control system Including Dell Precision PC system, monitor, keyboard, and mouse CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% r.h. Iisdpfxey Iwp Ss Amijb Volume: approx. 1700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerant: R452A: 9.5 kg R23: 3.7 kg Equipment Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation modes Sine, resonance dwell, limit control, amplitude dwell Multi sweep sine, noise soft-clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system System was last in operation System starts / control active Inspection under power possible Scope of delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climate chamber Accessories per photos Loading possible. Sale without warranty. Subject to prior sale and changes.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Ijdpfoy Nynaox Amijib You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: Iedpfx Amey El Ttoieib 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Isdpfxoy Sv S Hs Amieib

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Ijdpfxey D Nyue Amieib Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Iedpfx Amey Dd Nqsisib Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.