Used Crown Wf 3000-1.0 Nt for sale (15,088)

Condition: used, Year of construction: 2008, operating hours: 570 h, load capacity: 1,000 kg, lifting height: 1,550 mm, free lift: 1,500 mm, mast type: simplex, construction height: 1,965 mm, fork length: 1,150 mm, empty load weight: 748 kg, drive type: Elektro, construction width: 810 mm, High lift truck Load center of gravity: 600 Kjdpst Ddtgsfx Adyelt Fork width: 170 mm Fork thickness: 60 mm Mast type: Mono Condition: Ready for use and fully functional Technical condition: good Front tires Type: Polyurethane Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 160Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2022 Battery condition: 80 - 100% Pulse control, non-creeping tires,

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model CROWN SP 3522 - 1.0 3F7700 mast ID 23033.2653 d 3F mast Lowered height 3050 mm Lifting height 7700 mm Kodpfx Adjy Ir Rqjyjlt Capacity 1000 kg Platform height 7000 mm Picking height 8600 mm Cabin width:1370 mm Year 2015 Hours 2089 hours Capacity 24 v / 775 ah - Hoppecke OptionsFULL options- Mast = Triplex FFL - Equipped with side roll & sensors ( INCLUDING side roll / wheels & sensors !!! )Like NEW !!!

Condition: new, Year of construction: 2025, Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml); bottle volume: 350-1500ml; PET bottles; standard 28/30mm PET caps; 1500 liter of water filling /hour; 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of machines/modules. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Kodpev Nla Ajfx Adyelt

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) Kodey Rnp Iepfx Adyolt + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Kedjy Rnpbspfx Adyslt Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Transport can be arranged.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Ksdpfxevu Ticj Adyslt Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: used, electrically heated 132 kW frying length 3.000 mm belt width 900 mm dimensions: (L x W x H): ± 5.700 x 1.700 x 2.800 mm mecanical lid oil level control oil circulation pump filter sediment removal system Kljdpfx Adey Th Rksyst

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW Kodpfxjy S Rn Ao Adyslt with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed infeed conveyor Klodpfoy Nkdxjx Adyet outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 8 mm suitable for thermal oil heating (= 120 kW) with top hold down belt oil circulation pump level control adjustable speed infeed conveyor Kledpfx Aey H Dc Nsdyst outfeed conveyor sediment removal system lifting unit with electrical hoists suitable for fire protection overall length : ± 5.400 mm overall width : ± 1.500 mm New electric control box with new electrical components

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm Kjdpoy Ex Nnofx Adyjlt total height ± 3.450 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed sediment removal system filter suitable for fire protection mechanical hoists Kodpfxjy Ednis Adyslt dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, Year of construction: 2008, Mazak Integrex E500H-II x 3000 Multi-Tasking CNC Lathe. S/No. 204074 (2008) with Mazatrol Matrix Control, Maximum Cutting Diameter 820mm, Maximum Cutting Length 3048mm, C Axis 0.0001 degrees, B Axis -30/+210 degrees, 40 ATC, Spindle Speed 1,600rpm, Milling Speed 10,000rpm, Main Spindle 37Kw, Spindle Taper din50, Y axis -/+ 250mm, Fixed Steady, Swarf Conveyor Kodpfx Aeyzhc Nodyelt Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: new, functionality: fully functional, Year of construction: 2026, loading space width: 3,000 mm, loading space length: 5,000 mm, loading space height: 2,600 mm, Equipment: lighting, The Villex Medium Sales Container Cube Nero 1.0 from the Nero-LINE series is a compact and functional sales unit, measuring 5.0 meters in length, 3.0 meters in width and 2.6 meters in height. Its robust construction and modern design in RAL7016 (anthracite) provide a sophisticated appearance, while the 5.0 cm thick insulation ensures efficient thermal performance. The container is equipped with a sturdy steel door insulated with mineral wool and a large sales window (4000 mm x 1200 mm) including roller shutters, making it ideal for mobile retail or food service applications. Electrical equipment features a 32A CEE power connector (red), three double power sockets, two LED lights, and a light switch—ensuring the sales area is well-lit and ready for use. A sales counter is included in delivery and supplied separately; installation is to be carried out by the customer on site, as a permanently installed counter would require a special permit for crane-truck transport. With a weight of 1,100 kg, the container is both stable and versatile—perfect for events, markets, or stationary sales. Individual customization is available upon request. Item number: MEDVKCN1.0 Area: 15 m² Variant: 5.0 m container Length: 5.0 m Width: 3.0 m Height: 2.6 m Kedpfxjy Hrm Aj Adyslt Insulation thickness: 5.0 cm Panel color: RAL7016 (anthracite) Base frame color: RAL7016 (anthracite) Weight: 1,100 kg Doors: 1x door (steel) Windows: 1x sales window incl. roller shutters (4000 mm x 1200 mm) Electrics: 32A CEE plug (red), 3x double sockets, 2x LED lights & 1x light switch Equipment: 1x sales counter (counter supplied loose and to be assembled by customer)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Kledjy Sfx Nopfx Adyot Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, laser type: fiber laser, laser hours: 9,000 h, laser power: 500 W, travel distance X-axis: 300 mm, travel distance Z-axis: 400 mm, type of cooling: air, year of last overhaul: 2024, Equipment: documentation/manual, Do you want to manufacture complex and lightweight aluminum components? - Do you need part sizes up to 400mm? - Do you want to produce high-quality aluminum parts with a good metal 3D printing surface finish? - Do you want a solution that works IMMEDIATELY and is ready for use? Acquire a TruPrint 3000, which is still integrated into our production and is operated exclusively with AlSi10Mg. - You will receive a validated AlSi10Mg process with two very usable parameter variations (High Speed and High Density). - The system is ready for immediate use! Extensive accessories - A vacuum conveyor and sieve complete the infrastructure for efficient production. - Ideal for large powder quantities. - Availability approximately from Q3/2026. Technical data LPBF system from TRUMPF Designation: TruPrint 3000 G02 Year of construction: 2017 Serial number: S0721Q0025 Build volume: Ø 300mm x 400mm Laser configuration: 1x 500W fiber laser Laser operating hours: approx. 9,000h System operating hours: approx. 51,000h Last maintenance: 02/2024 Condition: very good Accessories: 1x build cylinder, 2x powder supply cylinder Stacker truck Year of construction: 2023 Condition: like new Depacking station Year of construction: 2017 Condition: very good Chiller Year of construction: 2023 Condition: like new Kedpey S Amqefx Adyjlt Your advantage - Proven system – immediate production start after commissioning - With optional accessories, a complete production system for metal 3D printing components made of AlSi10Mg - Open system – own parameters can also be developed - Component size up to 400mm with reproducible and high quality - Faster ROI compared to purchasing a new system - TruPrint 3000, including chiller, stacker truck, depacking station, new set of filters, 11x aluminum build platform The system is currently integrated into our production and is operated exclusively with AlSi10Mg. Availability approximately from Q3/2026 due to capacity expansion. Have we aroused your interest or do you have any further questions? Arrange a live inspection ✔ Inspect components ✔ Get started right away *Software for data preparation is not included in the offer!

Condition: refurbished (used), battery capacity: 700 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 855 mm, Tested forklift battery for your forklift - 80V 5PZS 700AH - DIN A + 1 year warranty + incl. Aquamatic automatic water filling system + incl. end discharge cables & REMA 320 connector (other connector types can be installed upon request) + Capacity: min. 90-100% (a C5 capacity test report is provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,028 mm Width: 855 mm Height: 784 mm Weight: approx. 1,860 kg Compatible with the following models and more: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S-336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Kljdpfjy Rnqrex Adyet Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P-325-00 Linde E30 SH-1276-00 Linde E35/600H-388-00 Linde E35 H-/HL-387-00 Linde E35 P-337-00 Linde E35 RHL-387-00 Linde E35 SH-1276-00 Linde E40-337-00 Linde E40 C-388-00 Linde E40 P-337-00 Linde E45/600H-388-00 Linde K 12/15-148-00 Linde P250-127-00 Linde P250L-127-05 Jungheinrich EFG 430 Toyota 7FBMF30/35 Toyota 8FBMT25 Crown TSP 6000-C Crown TSP 7000 Caterpillar EP30K/FB35KPAC Daewoo B30-35X Daewoo B35X-7 Hyundai 50B-9 Mitsubishi FB25N UniCarriers QX 2-30 Other common battery sizes available upon request. Shipping available.

Condition: used, Year of construction: 2003, functionality: fully functional, MHM SP3000 for sale, 14 pallets Klodpfjx Nv Szox Adyst 10 print heads plus 2 empty stations for flash cure units The machine is equipped with a fully operational GoTo function It is extremely well maintained, all print heads are functional, and it comes with four Calmat MW flash cure units. We use it daily in our production, and it can be tested on site. Three sets of pallets: - Regular - 280mm for children's t-shirts - Sleeve pallets.

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well maintained & ready for operation | Few crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane comes with a new UVV safety inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV inspection * 440 HP, 6x4 drive * Crane unit with current UVV inspection * New rear axle tires * Technically overhauled * Very well-maintained interior and exterior * Long-distance driver’s cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning * Electrically operated mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control Kodpfx Aoxxfl Todyelt For further information, please feel free to contact us.

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new safety inspection (UVV) | Top condition & ready for immediate use | Low crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – ready for immediate use. Highlights: Klodpfexul Erox Adyet - HMF 3000-K5 loading crane - New TÜV inspection - 440 HP, 6x4 drive - Crane system with current UVV inspection - New rear axle tires - Technically overhauled - Very well-maintained interior and exterior - Long-haul driver’s cab with 2 bunks - Air-suspended driver’s seat - Multifunction steering wheel - Air-suspended driver’s seat - Auxiliary heating/air conditioning - Extendable refrigerator compartment - Radio - Navigation system - Stationary air conditioning unit - Electrically operated mirrors and windows - Air horns - HMF 3000-K5 loading crane - Radio remote control For further information, please feel free to contact us.

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Kjdpsyv E T Uefx Adyslt Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm Kjdovg Thispfx Adyelt *

Condition: ready for operation (used), HR-Heligaron T image intensifier CXI-3000 Series & CXI-5600.532-1.024 FOV + CV-M4+CL camera, used, minor signs of use, 100% functional, scope of delivery as per photos Kledpfxsl Ecime Adyet

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. Klsdpfx Adecri E Njyot This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2352, center height: 200 mm, grinding length: 500 mm, grinding diameter: 55 mm, rotational speed (max.): 5,970 rpm, controller model: Siemens Sinumerik 840-D, TECHNICAL DETAILS Grinding diameter: 5–55 mm Grinding length: 500 mm Workpiece diameter: 5–55 mm Workpiece length: max. 500 mm Grinding wheel arrangement: right, 30° inclined Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z-axis drive: ball screw Travel speed: 0.01 – 10,000 mm/min Resolution: 1 µm Workpiece spindle runout: < 1 µm Spindle speed max.: 5,970 rpm Kodpexvxl Iofx Adyslt Workpiece changing system: Fanuc robot Control system: Siemens Sinumerik 840-D MACHINE DETAILS Total power requirement: 44 kW Centre height: 200 mm Machine weight: 7,000 kg EQUIPMENT Tailstock Longitudinal adjustment: manual Rotating centre: Junker standard, diameter 75 mm Clamping pressure: adjustable via hydraulic system Tailstock dimensions: diameter 100 mm × 430 mm