Used Crane Magnet, Mechanically Switchable Lifting Magnet, Mechanical Load Magnet for sale (46,855)

Condition: used, Crane magnet, lifting magnet BAKKER MAGNETICS Type: BM 400 Year of manufacture: 1998 Load capacity: 400 kg Magnet surface size: 190 x 155 mm Own weight: 36 kg Hfedpjxciwhefx Aicjk With manual switching lever Crane ring eye for attachment Load capacity 400 kg at 0.0 mm distance to the material and minimum material thickness of 30 mm.

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Hodpfx Aey Tptmeicefk Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock

Condition: used, Material clamp, material gripper, load clamp Lifting clamp, hoisting clamp, block grab Manufacturer: NORDGREIF, Type 7548 Hfjdjdz Spnopfx Aicsk Year of manufacture: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE marking Weight: 50 kg good condition

Condition: used, Crane hook, lifting block, lower block for DEMAG rope hoist, 2-sheave type Load hook Load capacity rated at 5 tons 2-sheave for 4 rope falls Rope diameter: approx. 13 mm Hedjw Nxy Hopfx Aicofk Distance from top of block to bottom of latch hook: 650 mm From center of sheave to bottom of latch hook: 450 mm Dimensions (L x W x H): 350 x 315 x 650 mm Net weight: 73 kg Used, in good condition

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Serial no.: 421850 Load capacity: 1000 kg Magnet diameter: 250 mm Power consumption: 0.662 amperes Mains connection: 200 volts DC = direct current Hfodpfxjxf Uygs Aicok - An external power supply is required (not included) - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: used, Year of construction: 2006, weight / kg weight max. ca. 10 - 12 t Hfodpfey S D A Tox Aicjk weight 750 kg

Condition: used, Electric chain hoist crane DEMAG, type DCM PRO -125 1/1 H2.8 V8/2, Manulift Year of manufacture: 2004 Load capacity: 125 kg Hook travel: 2.8 meters Lifting speed: 8 m/min Fine lifting speed: 2 m/min Distance from suspension to load hook: 630 mm Power supply: 400 volts, 50 Hz Hfjdpfx Aozugnujicok 1 load chain = 125 kg Manulift hand control directly on the crane hook Weight: 21 kg Good condition

Condition: used, overall weight: 800 kg, working height: 2,201 mm, BPL – Flexi-Lifter Brubek B.V. Mobile lifting aid Hfodpfx Aiozil Sbjcok Vertical lift: 1,950 mm Fast product pick-up, lifting, rotation, and transfer User-friendly operation of the load lifter Mobile crane with a small footprint The system operates exclusively with compressed air One-hand control unit integrated into a handle above the hook The lifting cable is visible for half its length – the other half runs inside the column Weight: 800 kg Product or load: length = 400 mm, width = 150 mm Radius: 3,000 mm Maximum load weight: 30 kg Operating height when depositing: 1551 Minimum operating height: 251 Maximum operating height: 2201 Dimensions: 3.7m x 2.4m x 1m Flexible lifter with base plate (dimensions approximately 1.0 m x 1.0 m) An inspection while the equipment is powered can be arranged after prior appointment. Price upon request All technical specifications are subject to printing errors/mistakes. Sale exclusively to countries within the EU.

Condition: used, axle configuration: 2 axles, first registration: 06/2007, color: other, Year of construction: 2007, Empty weight: 8.880 kg Hfodpfezltuijx Aicok Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left mm right mm

Condition: good (used), Crane block, crane hook, load hook, single hook -Crane hook: load hook with adapter frame -Load capacity: 7.5 t -Dimensions: see photos -Transport dimensions: 860/470 (H460 mm Hfjdpeucmqqjfx Aicek -Own weight: 77 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 203170, Rotomax 1,000 KG Hfodpszkktajfx Aicok Lifting/loading rotor 400V connection Year of manufacture: 2002

Year of construction: 2024, operating hours: 10 h, condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, machine/vehicle number: 0000, Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum has a load capacity of 3,000 [kg]. Type ATV-Q-3-3x3, brand Tiger Hebezeuge. The crossbeam has been used only a few times and a maximum of 500 kg has been lifted with it. It shows only minimal signs of wear. See photos. Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and shipping costs (approx. €380). Selling because it is no longer needed. Please contact me if you have any questions. Description according to the manufacturer: Aluminum crossbeam with 4 swivel lifting hooks - H-shaped crossbeams made of aluminum. Product features: Type: ATV-Q-3-3x3 Load capacity: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing, cross profile: 400-3,000 [mm] Aluminum load beam for crane operation Lightweight crane crossbeam in H-shape made of aluminum Suspension for single hooks, DIN 15401 With four adjustable safety lifting hooks (rotatable by 360° under load) With a quick-release system to quickly adjust the lifting hooks a) on the main profile in a grid of 50 mm b) on the cross profile in a grid of 50 mm All parts are made of either aluminum or polyamide (with the exception of the bolts and suspension hooks) The two cross profiles can be removed from the main profile Surface: plain Product description: Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum. This aluminum crossbeam in H-shape consists of a main beam and 2 cross beams. The crane crossbeam can not only be adjusted in many ways but also easily disassembled. This simplifies transport and saves space if the crossbeam is not needed. The load-bearing devices have a type plate with manufacturer, load capacity, weight and type number, as well as a QR code with access to the EC declaration of conformity. Safety note: Note on the safe storage of crossbeams Hfsdpjzn Rausfx Aicok According to DGUV rule 109-017, chapter 7.5, load-bearing devices must be placed or laid down in such a way that they cannot tip over, fall or slide off.

Condition: good (used), Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Magnetic lifter: Lifting magnet -Type designation: MC01 1027 RU 2.7 SO -Load capacity: t -Voltage: 220 V Hodpfxozd Sdao Aicsfk -Dimensions: Ø 280 x 230 mm -Weight: 43.8 kg

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Operation via special handle on the vacuum lifting device. The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim Hfsdpfxszc Agdo Aicsk

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 08/2028, input frequency: 50 Hz, electrical fuse: 10 A, lifting height: 1,700 mm, construction height: 2,200 mm, load capacity: 250 kg, NEW NEW Lifting Tipper HUB 3 NEW NEW for lifting and tilting boilers robust technology! Stainless steel design, mobile Infinitely adjustable, electric Tilting height up to 1.7m Easy relocation Boiler capacity: 80 - 140 liters Battery connection New device with warranty + spare parts service Quality from a specialist company! Hfjdpjw S Smxofx Aicok Benefit from over 35 years of experience! Options: different boiler size/boiler mount tilting height in various heights maintenance contract delivery service spare parts box for added safety instruction and commissioning Come and visit us!

Condition: new, Year of construction: 2025, Telescopic boom with a towing capacity of 8000 kg for LSP 600. Adjustable via perforated rail and telescopic tube. Load chart on the crane. Hedpfx Ajhbm I Toicjfk Attachment via forklift tines with dimensions up to 185x80 mm. Painted in RAL 2002.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Payload capacity: 1 to 1000 kg Connection: 400V, 16A Item location: 75053 Gondelsheim Hedpjxwd Iqjfx Aicofk Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: used, Hub table – tool cart GENKINGER, type FEP 6/15 Tool lift, workshop lift Hedpfezczvkjx Aicjfk Manufacturer’s No.: 81.857 Year of manufacture: 1981 Load capacity: 600 kg Table size: 700 x 650 mm Table height (bottom): 180 mm Lifting height: 1550 mm - large plastic rollers: Ø 180 mm - Lifting via hydraulic lifting column with foot lever pump - Mechanical support system/brake via hand lever Own weight: approx. 220 kg Good condition

Condition: good (used), Load lifter / lifting aid, Expresso, Lift&Drive 85 – used - : Hedpfx Ajyhxlwsicefk Price ex location: €950 (net) Manufacturer: Expresso Model: Lift&Drive 85 Year of manufacture: unknown Load capacity: 70 kg Charging voltage: 230V, 50Hz Battery voltage: 18V / AH Condition: good Available: immediately Location: Waltrop

Condition: used, Hydraulic lifting platform for operator, brand Sordella Spa, used. Max load Kg. 200 Hfsdpfx Ajzn Hr Toicjk Maximum platform height 13 m Maximum working height m. 14.50

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Item location is 75053 Gondelsheim See pictures Hjdpjzhtfmefx Aicjfk

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Hfjdpsr E Ht Hefx Aicok Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition

Condition: used, Electric chain hoist, electric lifting mechanism, GIS crane type 150 / F Manufacturer's serial number: 1502802 Year of manufacture: 1981 Load capacity: 1500 kg Hfodsgi E Evepfx Aicjk Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min - Electric trolley with a speed suitable for double T-beams - 2 load strands Good condition.

Condition: used, Electric chain hoist, crane, hoisting unit KONECRANES type XN 20 1608 B2 Serial no.: 1016304318 Year of manufacture: 2010 Lifting capacity: 1600 kg Hook travel: 9 metres Main lifting speed: approx. 8 m/min Fine lifting speed: approx. 2 m/min Chain size: 11.3 x 31 DAT Main hoist motor power: 3.5 kW Fine hoist motor power: 0.86 kW Hfodpsw Nklnjfx Aicjk Power supply: 400 V, 50 Hz - 1 load strand

Condition: used, Electric chain hoist, electric lifting unit, crane STAHL type T510-8 / 2.0 2/1 Manufacturer's serial number: 1524132, year of manufacture: 1997 Lifting capacity: 2000 kg Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min Load strands: 2 Control pendant cable length: approx. 0.9 meters Rated power: 1.6 kW / 0.36 kW Rated current: 4.3 A / 2.5 A Hsdpfekwh H Aex Aicjfk Mains connection: 400 volts, 50 Hz - Suspension eyelet on the top of the crane - Emergency stop Weight: 75 kg Good condition