Used Clamping Table Part Table for sale (34,726)

Year of construction: 1973, condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, dividing table, vertical dividing table -Manufacturer: Peiseler, clamping table part table type GT 320x320 -Table surface: 320 x 320 mm -T grooves: groove width 14 mm, groove spacing 100 mm Crsdpjqddi Refx Ac Tog -Spindle bore: Ø 30 mm -Dimension: 475/410/H125 mm -Weight: 85 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Pneumatic Hold-Down for a Sliding Table Saw – Essential Equipment for Maximum Material Stability A pneumatic hold-down for a sliding table saw is an essential piece of equipment for facilities that require maximum stabilization of the material being cut. The two-section model with a length of 3,200 mm ensures secure and even pressure against the worktable, eliminating problems commonly associated with working without a hold-down – chipping, material waste, and inaccurate cuts. Key Advantages Pneumatic hold-down with two independent sections – each equipped with two cylinders, allowing flexible control of the pressure applied to different areas of the table. Extended 3,200 mm beam – provides full coverage of a typical sliding table saw table length and is ideal for processing large-format panels. Optimal working force at low pressure – effective operation from just 2.0 bar, resulting in lower energy consumption and simpler installation. Improved operator safety – securing the material reduces the risk of panel movement and uncontrolled shifting during cutting. Reduced material waste – stable positioning eliminates cutting errors and reduces the amount of waste. Higher edge quality – with no material vibration or movement, cuts are clean and free from burrs and fraying. Construction and Technology The hold-down beam is made of a durable steel profile, ensuring long service life and resistance to deformation. The pneumatic cylinders are arranged in two independent sections, providing even pressure along the entire length of the material being cut. The separation of the pressure zones makes it possible to adjust the clamping force to different panel sizes and thicknesses. The entire system is designed for quick installation on most sliding table saw worktables, making it easy to integrate into existing production lines without modifying the machine's structure. Precision and Work Efficiency Using a pneumatic hold-down on a sliding table saw directly improves cutting efficiency and dimensional repeatability. Even when cutting thin or laminated panels with finished surfaces, the operator can be confident that the material will remain securely in position. This has a direct impact on the quality and appearance of the finished component. Csdpovxtcqofx Ac Terg Applications The two-section hold-down for sliding table saws is suitable for: furniture manufacturing facilities specializing in cutting laminated panels and MDF, production of structural components from wood and wood-based materials, precision applications where excellent cutting quality and defect-free edges are required, workstation automation, as a component supporting serial cutting processes. Standard Equipment 3,200 mm hold-down beam 4 pneumatic cylinders (2 per section) Set of connectors for connection to the pneumatic system Mounting brackets for installation on the worktable Optional Equipment Quick-release air connection module Additional safety valve Foot control system (pneumatic pedal) Integration with the saw's control panel Technical Specifications Parameter Specification Hold-down length 3,200 mm Maximum material height 100 mm Number of cylinders 4 Operating pressure 2.0 bar

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 200 mm weight 1549 kg dimensions of the machine ca. 3000 x 1500 mm SIEGMUND Authorized Dealer - All Items in Stock! !! SPECIAL OFFER !! SIEGMUND Retro Welding Table 3000x1500x200, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product Description - Table dimensions: 3000x1500x200 mm - High-quality S355J2 N steel with plasma nitriding - Material thickness: approx. 24.5-27 mm - Hole diameter: 28 mm - Holes arranged in a 100x100 mm grid - Corners, edges, and holes chamfered at 45° - Side panel height: 200 mm - Holes in side panels arranged in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust, scratches, and weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions: 3000 x 1500 x 200 mm - Plasma-nitrided version - Includes 6x base feet (standard configuration) - Includes accessory set (see Figure 3): * 8x 280626.N * 12x 280511 * 6x 280410.N * 2x 280420.N * 2x 280422.N Cjdjzvq Emspfx Ac Torg * 4x 280110.N * 2x 280152.N * 1x 283999

Condition: used, table length 630 mm table width 500 mm Credpeyt R R Ssfx Ac Tog table load / t

Condition: used, length 1000 mm width 500 mm height 150 mm Cjdpfxeyr Smre Ac Tsrg

Condition: used, length 1000 mm width 500 mm height 150 mm Csdoyr Smxopfx Ac Terg

Condition: used, table length 1000 mm Cedpfxjgrndis Ac Torg table width 1000 mm table load / t weight 1100 kg table height 100 mm

Condition: used, For sale is a welded T-slot angle bracket for clamping workpieces on a drilling machine. Cedpfsznv E Nsx Ac Torg Dimensions: Leg lengths 1500 x 850 Width 1400

Condition: good (used), Welding table with rotating fixture (custom-built) Tabletop: 2000 x 1000 mm Working height: 640 mm Thickness: 28 mm Cedpfx Acefhnv As Tsrg Weight: approx. 1500 kg Fixture is bolted to the tabletop! Fixture can be moved by motor over a distance of 500 mm Overall height: approx. 1750 mm Length: 2700 mm

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Credpfx Asxy Styec Tsg Weight: 61 kg In good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Csdpfx Aethuzpjc Terg Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Crsdpfx Acoznn Hls Tjg Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: good (used), total height: 350 mm, overall weight: 5,000 kg, total width: 1,500 mm, table height: 350 mm, total length: 4,200 mm, Used steel clamping table 4200 x 1500 x 350 mm Cedpfouzaafsx Ac Terg Weight approx. 5000 kg

Year of construction: 2008, condition: ready for operation (used), Bio-Circle Compact parts cleaner / parts washing station - Year of manufacture: 2008 - Working area width: approx. 700 mm - Working depth / working area depth: approx. 450-480 mm Cedpfx Ajztd Ngsc Torg - Working height: approx. 800 mm - Load capacity / load capacity up to approx. 100 kg - Empty weight: approx. 45-55 kg - Heating power: approx. 650-700 W - Temperature (preset): approx. 41 °C - Electrical connection: 230 V, 50 Hz - Filling volume (optimal / maximum): approx. 100 L - Tank / basin material: LDPE plastic (low-density polyethylene) Dimensions: L x W x H 0.6 x 0.9 x 1.1 meters / Weight 45 kg

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: Csdpfx Ashii R Dsc Tsrg - Clamping area approx. L 900 x W 600 mm - Table height 480 mm - Circumferential water channel - 3 T-slots M 16, L 900 mm - Side mounting plate - Space required: L 1000 x W 760 x H 480 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2010, Offer 25338 Technical data: - Length 1300 mm - Width 800 mm Cedpfszaa Awox Ac Terg - Plate height 215 mm - Wall thickness 15 mm - Hole diameter of the perforations approx. 28 mm - Center distance of the perforations, each approx. 100 mm - Table height approx. 970 mm - Total weight approx. 400 kg

Condition: good (used), OFFER 21100 Technical specifications: Codpfx Aogmnknjc Tjrg - Table dimensions approx. 1700 x 1700 mm - Side length each approx. 700 mm - Welded steel construction made of flat steel 100 x 30 mm - Table height approx. 850 mm - Table area approx. 2.3 m² - Various clamping tools - Weight approx. 1500 kg

Condition: used, clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table swiveling -Axles: adjustable with hand crank, see photos -Dimensions total: 530/350/H450 mm -Weight: 56 kg Cedju Tlgljpfx Ac Tjrg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines Crodpfxob A Iyuj Ac Teg -Weight: 200 kg -Quantity: 1 available Price: per piece

Year of construction: 2012, condition: used, Clamping plate with threaded hole and cross table, clamping angle, T-slot table, rotary table, milling machine table, upper support, top slide, dovetail guide, tool slide, cross table, cross support Cjdpekm Rn Sefx Ac Tsrg -Manufacturer: Santenberg, clamping table: milling machine table from CNC machining center GTC S 2 -Linear guide: THK YNA419 -Shaft: Ø 20 x 45 mm -Dimensions: see photos -Total dimensions: 715/530/H285 mm -Weight: 222kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm Cedpfehubc Nsx Ac Torg -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Condition: used, clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg Cedpfou N Sinjx Ac Tjrg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Credpfxsqddi Aj Ac Tsg -Clamping table: milling machine table T-slot table -Table surface: 400 x 250 mm -Y-axis: 95 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 16 mm, groove spacing 63 mm -Total dimensions: 455/400/H140 mm -Weight: 40 kg

Condition: good (used), Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm Crodpfjt H Tqtex Ac Teg -Weight: 30 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press Credsw Dccvjpfx Ac Teg -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg