Used Cfs Spiral Steam Tunnel for sale (2,644)

Condition: excellent (used), Year of construction: 1999, Type: STS600/8/130 Serial number: 60 Year of construction: 1999 Belt width: 600 mm Tiers: 2 x 4 pc. Belt length: 60 m Product gap: 130 mm Retention time: 2.9 - 29 min Steam: NW40, 4 - 8 Bar Exhaust: 2 x 2000 m³/h Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 27kW Lsdpex Ttxtofx Ampjaa Dimensions: 9200 x 3900 x 4700 mm Weight: 13500 kg Including continuous belt washer

Condition: used, FlowCook all stainless steel suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm Ledpfxeyxnflo Ampsaa outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt Lajdpey D Ixpefx Ampoa dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: used, cooking length 4.000 mm belt width 600 mm Laedoyy Nr Aspfx Ampea all stainless steel with electrical hoist steam heated (steam generator not included) temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm adjustable speed

Year of construction: 2010, condition: good (used), Graham steam tunnel Lsdpfx Amjfk Iduopjaa Model: Z3271 2010, Stainless frame and stainless mesh belt, 3000mm x 380mm belt, variable speed, with Hydromatik steam generator, 3Ph

Condition: ready for operation (used), Year of construction: 2022, total length: 1,800 mm, product height (max.): 400 mm, product width (max.): 120 mm, input voltage: 220 V, SHOWROOM machine, the machine advertised was never delivered and was only used for test purposes. In the pictures, the steam tunnel is switched on for test purposes. alpha-pack SST-1500 steam tunnel Technical details: -even steam distribution through low-pressure steam drum Laedpst A Ar Ejfx Ampsa -height-adjustable steam steel pipes -adjustable steam output -can optionally be combined with conveyor belt and sleeve label machine Steam tunnels are particularly suitable for shrinking heat-shrinkable film sleeves on all types of products (glasses, PET bottles, glass bottles, cans and much more). Our steam tunnels are easy to use and the cost-effective alternative to conventional shrink tunnels that are based on electric heaters.

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 Lajdpfx Amjvf Iuzspja CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Condition: used, 4 chambers with dry steam, glass doors, suitable for this Ledpfxexytq To Ampjaa Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Dohmeyer Cryogenic Spiral Freezer with Pre-freezing Tunnel Dohmeyer's spiral cryogenic freezers are designed for rapid freezing or chilling of food products using liquid nitrogen (LIN – Liquid Nitrogen). They are mainly used in the food industry, especially for products requiring quick freezing such as meat, seafood, pastries, ready meals, and other delicate products. Model: DOH-SPK-D244-W26-E21-LIN-2017 Ljdswp Uhbopfx Ampeaa Type: Cryogenic Freezer Spiral Serial number: 201703033177 Year of manufacture: 2017 Cryogenic gas/operating pressure: LIN / 2…4 bar Compressed air/pressure range: 6…8 bar Power supply: 3x400V + N + PE, 50 Hz Weight: 16,000 kg Pre-freezing tunnel/cryogenic tunnel freezer Brand: ENT Edelstahl- und Nahrungsmitteltechnik Type: CFP 600 Serial number: 03 133/2 Year of manufacture: 2017

Condition: used, functionality: fully functional, The FRIGOSCANDIA FF-2-RMA IQF (Individual Quick Freezing) tunnel freezer is a continuous freezing system designed for food products that require individualized quick freezing, such as seafood, fruit, vegetables, sliced meats or pre-cooked products. Its linear design with forced air flow guarantees homogeneous cooling, avoiding block formation and preserving product quality. Laodpfxewn Hd Se Ampsa Applications: Fishing industry: Shrimps, prawns, fish fillets, mollusks. Fruit and vegetable industry: Whole or chopped fruit, vegetables, pulses. Meat and meat preparations: Meatballs, chicken strips, vegetable burgers. Precooked products: Pasta, rice, ready-to-cook mixes. Production depends on the product, in peas for example it would give: 850 kg/h. Inlet temperature: +15ºC Outlet temperature: -18ºC Production may vary depending on the product.

Condition: excellent (used), functionality: fully functional, WORKING MEASUREMENTS: Useful tape width: 55cm Number of spirals: 18 Spiral diameter: 4.20 m approx. Height of product entry: 1.20 m Height of product exit: 3.70 m Technical description: DRUM: It is the element in charge of transmitting the movement to the belt, it is built by stainless steel profiles welded to a base ring formed a kind of cage. MAIN STRUCTURE: It is the part of the tunnel that supports the conveyor belt (through an auxiliary structure) and the drum (through the bearings). It is built with folded and welded stainless steel plate profiles. Laodpjwnzahefx Ampja AUXILIARY STRUCTURE: It supports the belt in its movement. To avoid metal-to-metal contact, it is covered with a special high density polyethylene profile. DRUM SUPPORTS: The lower supports have two main functions: centering the drum and supporting its weight. In the upper part, other supports are placed whose mission is exclusively to collaborate in the centering of the drum. EVAPORATOR: A circular evaporator located at the bottom of the drum is used, which results in an important space saving and in a horizontal air circulation without dead spaces. FANS: Fans are placed at the top and at the bottom with the discharge directed towards the inside of the evaporator so that the air flows through the evaporator towards the product. The fans will be sized so that the air velocity, both through the evaporator and through the product, is adequate. TRACTION: Consists of an electric motor-reducer of adequate power, with previously calculated reduction ratio, so that the speed of the drum and therefore of the belt are suitable. SPEED VARIATION EQUIPMENT: This consists of a frequency variator that, by varying the power supply frequency to the preset electric motor drive (between 20 Hz. and 60 Hz.), modifies its speed and therefore the output speed of the reducer, which allows us an appropriate retention time in each case. CONTROL PANEL AND MANEUVERING BOARD: The control panel includes the electrical and maneuvering elements of the Tunnel. In its front panel there are the general maneuvering controls, as well as a synoptic of operation and with the indications of the safety and alarms indicated with a luminous signal. Inside are the control elements, frequency variator with potentiometer, electronic starters for fans and other equipment protection elements.

Year of construction: 2023, condition: new, Spiral washer, used for cleaning small parts like bolts-nuts-screws etc. Tunnel-type spiral washer, parts are loaded via vibrating table and transferred via spiral conveyor. Washing-rinsing-drying options are available Lsdefhb Icjpfx Ampeaa Parts washer for small parts. Automatic washing machine, small parts washing, stamped parts washing machine, spiral washer, bolt washer, nuts washer, screw washer

Condition: used, all stainless steel Ledpfsy Eya Usx Ampeaa mobile adjustable speed belt width 600 mm with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm Lasdpfoy Ex Nnjx Ampja total width ± 1.800 mm total height ± 3.450 mm

Condition: used, all stainless steel speed up to ± 50 strokes / min. mobile with outfeed conveyor belt width 900 mm content of hopper : 530L surface of the dies 870 x 140 mm suitable for dies with a thickness of min. 6 mm and max. 40 mm power 22,8 kW weight 2.200 kg Siemens PLC + HMI Touch (digital readout with possibility of storing recipes) Laedpfxey Ex Iwe Ampja renewed control box with new electrical components and cables hydraulic system fully overhauled, cylinders, pumps, motors, piping, filter,... this forming machine is ideal for forming all kinds of meat burgers, chicken products such as nuggets, chicken burgers, schnitzels,... fish products : fish nuggets, fish burgers, fish fingers potato and vegetables products, vegetarian products. nuggets (depending on product and diameter): 60.000-80.000 pcs/hr burgers (depending on product and diameter): max. 22.000 pcs/hr completely overhauled new PLC control Barsso/Siemens S7/1200 + HMI TP700

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator with belt wash system Lajdpfx Amjy Emtuspsa suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: used, all stainless steel nett belt length 2.000 mm nett belt width 400 mm electrically heated: 47 kW oil circulation pump level control with top hold down belt filter lifting unit with manual hoists adjustable speed infeed conveyor outfeed conveyor suitable for fire protection overall length : ± 4.200 mm Laodey Ednvspfx Ampsa overall width : ± 1.200 mm

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel electrically heated 72 kW heating capacity 75 kW total connected power net frying length : ± 3.000 mm net belt width : ± 500 mm in- and outfeed belt teflon infeed belt adjustable speed Lsdpfxsy Ednio Ampoaa sediment removal system filter suitable for fire protection mechanical hoists dimensions (l x w x h) : ± 6.300 x 1.700 x 3.100 mm

Condition: used, all stainless steel suitable for thermal oil heating nett belt length 7.000 mm nett belt width 700 mm Laodey D Ixispfx Ampea adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 12.500 x 2.400 x 3.900 mm thermic heating power 254 kw

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Lsdpfx Amjyivr Tspoaa

Condition: not inspected (used), 7m 600mm thermal oil fryer with top hold down belt. Has come direct from production. 7m frying length, 600mm belt width. Electric canopy hoist. Lsdpfxsht Hgns Ampeaa

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile Lodpfxjy Aunue Ampsaa variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, suitable for thermal oil heating (= 131 kW) Laodoy Alpcjpfx Ampsa 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: excellent (used), Kemper Eco 50 Spiral Mixer For further information please send an message Laodpfx Ajkzkrhempsa

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Ledjw Elytepfx Ampjaa