Used Cassel Shark 2 Bd for sale (76,799)

Year of construction: 2019, condition: good (used), Cassel Shark 2 Metal Detector Pgodpoxyw N Tjfx Aaaek The METAL SHARK is used free-standing or combined with conveyor belts. Using 3D detection technology, it detects the smallest magnetic and non-magnetic metal contaminants (iron, stainless steel, aluminum etc.) precisely and reliably even under difficult conditions. The robust, closed stainless steel housing is stable and easy to clean – ideally suited to the meat industry. Reliably detects metals in raw or frozen meat in standardized E2 boxes Especially high sensitivity with moist or frozen products with 3D detection Easy setup and intuitive operation with Autocalibration and TeachAssistant Maintenance-free design with automatic and continuous calibration of detector coils Manufacturer: Cassel Model: Shark 2 BD Year: 2019 Power: 0,75kW Aperture LxW: 385x260 mm Material: Stainless Steel

Year of construction: 2021, condition: like new (used), Ref: MM6411 Cassel Shark 2A Metal Detector system. Model MI4 ( 4 frequency range from 35 - 300Khz ). Aperture 450mm x 200mm ( 125mm effective height ). St/St conveyor 1800mm long with 400mm wide modular belt. Ram reject into lockable reject bin. Full Retail Spec System. Psdpfxjy Eg Nvj Aaaegk Year 2021 Lockable castors fitted Handing left to right Ex-demonstration so system is as-new condition.

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Ethernet Module enables software connection (auto reporting and remote maintenance) Pgsdpfet Dkrcex Aaaek Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating

Condition: as good as new (ex-display), Year of construction: 2017, Siemens BD2 BD-2 busbar - busbar system Compatible with the Klöckner Möller BD 2 rail including connector, end cap and holder Type BD2 - 400 amp - 5 pole (L1 L2 L3 N PE) Are available : 41.6 running meters (13x 3.2m) 400A rail, almost as good as new 19.2 running meters (6x 3.2m) 630A rail, used (Klöckner Möller) Voltage Ui max. 660V, frequency 16.66 - 60 Hz Tap-off boxes with the following current strengths are also available: 25 - 50 - 125 - 160 - 250A We can offer you a complete system. Prices are per linear meter The dismantling was carried out by a qualified electrician. Busbars are in MINT condition!!!! Please inquire about lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Pgsdpfx Aaocumxceask Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system? Demag KBK systems, column slewing cranes, wall slewing cranes are available multiple times!!!!

Condition: good (used), Cassel Metal Shark metal detector If metal is detected the outfeed belt will open (see the video). Podpfx Aovzw Dqeaasgk The throughput of the head is 15cm in height and 65cm in width. Machine Dimensions LxWxH: 1.700x1.300x2.250 mm

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2250A, Complete Klöckner Möller - Siemens BD2 - 250A busbar system available! Stock 81.25 running meters!!! Type BD2-250A / 250 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length 3.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 400A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Pgodjrfwngjpfx Aaask Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Year of construction: 2005, condition: excellent (used), machine/vehicle number: RHBD2400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock 56.50 running meters!!! Type BD2-400A / 400 Amp - 5 pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Podpfx Aorfwnkjaaegk Rail length 3.25m, 1.25m Price per meter including connectors, end pieces and brackets Infeed and outlet boxes 16-32-63-125-250A are available as options The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! Danger; There are also 100A, 160A and 250A rails available - please inquire!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system?

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pulsotronic M-Pulse 2 Metal Detector with Conveyor Brand: Pulsotronic-Anlagentechnik GmbH Type: M-Pulse 2 BD-HD 350x150 LPW MFT Year of manufacture: 2018 Serial number: 90007273 Voltage: 115/230 VAC Frequency: 50-60 Hz Detection opening dimensions: 350 x 120 mm Pjdpfxoyr S Nme Aaajgk Belt width: 240 mm Overall dimensions: 3500 x 900 x 1300 mm The Pulsotronic M-Pulse 2 metal detector is an advanced quality control system from 2018, essential for ensuring food safety in production processes. The device is designed for precise detection of metallic contaminants in products transported on the integrated belt conveyor. With a detection opening of 350 x 120 mm and a robust stainless steel construction, the system is perfectly suited for the food industry, guaranteeing maximum detection sensitivity and easy maintenance of hygiene.

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA Podpfx Aajy Ani Eoasgk - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. It shows normal signs of use as visible in the photographs. Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Pgedeyxrbdopfx Aaask Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: used, total height: 1,750 mm, total length: 1,900 mm, total width: 1,200 mm, Empty weight: 500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Mitre cutting available: Yes - Round cutting capacity [mm]: 260 - Power [kW]: 1.5 - Saw blade length [mm]: 3150 - Saw blade width [mm]: 25.4 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 72 - Options: Digital readout - Transport dimensions: 1900mm x 1200mm x 1750mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pedpfxey E Shwe Aaajgk Lukas van Rossum

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm Pgsdpfx Aajy Hu H Esaok -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: good (used), Year of construction: 1997, Used bandsaw by MEP Model: Shark 260 Capacity: 260 x 210 mm Pgedpfx Aajy A Eccsajk Includes 2 feeders

Condition: good (used), Year of construction: 2011, functionality: limited functionality, power: 1.93 kW (2.62 HP), input voltage: 400 V, cutting height (max.): 250 mm, overall weight: 370 kg, Equipment: CE marking, Brand: MEP Model: Shark 281 Year of manufacture: 2011 Pgodpfx Asy A Ir Tjaask Serial number: 041593 Power (kW): 1.93 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1600 x 800 x 2050 (excluding conveyors) Weight (kg) approx.: 370 (excluding conveyors) Stock quantity: 1 Manufactured in: Italy Cutting capacity (mm): 250 round / 230 square / 280 x 200 rectangular Comments: Fair used machine, ready to use.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit Podpfjxabavsx Aaajgk * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Pgsdpfxjfg E H Sj Aaaek Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Pgedsfg E H Tjpfx Aaajk Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, cutting diameter 300 mm Pjdpsfg E H Ujfx Aaajgk capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min Pgodofg E Iaopfx Aaask dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 36 / 72 m/min dimensions of saw-band 2950 x 25,4 x 0,9 mm weight of the machine ca. 0,4 t Dimensions (LxWxH) 1,5 x 0,9 x 1,5 Semi-automatic function: Pedpfx Aefg E H Reaajgk Vice closes and motor starts, saw head lowers for the cut, motor switches off, saw head rises, Vise opens. Some features: New centralized switch console on an articulated arm. Latest generation hydraulic control unit, highly powerful and with low energy consumption. Base frame with pull-out coolant container. The machine complies in all areas CE regulations!

Condition: excellent (used), machine/vehicle number: WKEAZ000000419877, axle configuration: 2 axles, first registration: 11/2008, suspension: air, color: other, Year of construction: 2008, WKEAZ00000419877 = More information = Axle configuration Make axles: BPW Brakes: disc brakes Suspension: air suspension Front axle: Steering Weights Empty weight: 2.950 kg Carrying capacity: 15.050 kg GVW: 18.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: QAKN129 = Dealer information = Psdpfx Aaoymq Ideasgk Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 03/2019, total length: 9,220 mm, total width: 2,480 mm, total height: 1,080 mm, suspension: air, tire size: 445/45-R19.5, wheelbase: 5,170 mm, Year of construction: 2019, = Additional options and accessories = - 20FT connections = Remarks = Attractive 2019 KRONE AZ18 MAXI 2-axle trailer (year of manufacture 2019) equipped with ABS/EBS, BPW axles with disc brakes, 2 lift and lower valves, height: 105 cm, tires 445/45-R19.5 (tread depth left: 10/9 mm; tread depth right: 8/8 mm), unladen weight: 2,820 kg, maximum permissible total weight: 18,000 kg, Dutch registration, 4 units available = Further information = Axle configuration: Tyre size: 445/45-R19.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Front axle 1: max. axle load: 9,000 kg; steered; left tire tread: 60%; right tire tread: 55% Front axle 2: max. axle load: 9,000 kg; left tire tread: 50%; right tire tread: 50% Weights: Unladen weight: 2,820 kg Payload: 15,180 kg GVW: 18,000 kg Functional: Body brand: KRONE AZ Condition: Technical condition: very good Optical condition: very good Pgodpfx Aaoy A N Rkeaok Identification: Registration number: 38-WT-PR More information: Please contact Arne Honingh for further information.

Year of construction: 2022, condition: ready for operation (used), total width: 2,400 mm, total height: 10,000 mm, product length (max.): 2,400 mm, Extraction system manufactured in 2022. This SCHUKO Solo-160-2323/30/182/BD features an impressive airflow of approximately 15,500 m³/h, designed for handling dry plastic chips. It includes a total filter area of 182 m² and a filter hose diameter of 160 mm. If you are looking to get high-quality extraction capabilities, consider the SCHUKO Solo-160-2323/30/182/BD machine we have for sale. Contact us for further details. Pgedpfx Ajy Dgfzeaaok • Condition: Unserviced – no warranty • Airflow: approx. 15,500 m³/h • Dust type: Plastic chips (dry) • Filter hose diameter: 160 mm • Filter hose length: 3000 mm • Total filter area: 182 m² • Rotary valve power: 0.75 kW

Condition: used, empty load weight: 2,575 kg, maximum load weight: 15,425 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2015, suspension: air, tire size: 385/65 R 22,5, color: other, gearing type: other, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Pgodpfx Aaoy Etm Uoask

Condition: excellent (used), mileage: 581,690 km, power: 183 kW (248.81 HP), first registration: 09/2013, fuel type: diesel, tire size: 295/60 R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, total length: 9,700 mm, total width: 2,520 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, tail-lift, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Refrigerator - Sleeping berth - Radio/CD player Psdpfxoy Dfr Tj Aaasgk - Side mirrors with electric adjustment - Sun visor - Digital tachograph = Further information = General information Cab: single Registration number: 11-BDB-8 Technical information Number of cylinders: 6 Engine displacement: 9,186 cc Axle configuration Tyre size: 295/60 R22.5 Brakes: disc brakes Suspension: air suspension Front axle: Max. axle load: 7,500 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle: Max. axle load: 11,500 kg; Tyre tread left: 40%; Tyre tread right: 40% Weights Unladen weight: 9,064 kg Payload: 9,936 kg Gross vehicle weight: 19,000 kg Functional Tail lift: Dhollandia Maintenance APK (general inspection): valid until 09.2026 Condition Technical condition: very good Visual condition: very good Damages: none