Used Camam Vertical for sale (7,166)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" Nlodpfx Ameyug R Reneb • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) Nedpsyug Hxsfx Amnelb • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: used, Year of construction: 1993, Camam brand equalizer Nedpfx Amsy Ud R Njnelb

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. Njdpfx Ajv Aalyomnjlb - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Camam brand mortising machine 4 horizontal oscillating spindles 2 types of oscillation (1 group with 3 spindles + 1 spindle tilting group) 2 belt-driven motors Nledpsy S Acfsfx Amnsb 1 motor for 2 oscillations

Condition: used, Double Camam portable saw, belt-driven, with 2 horizontal spindles and 3 vertical spindles, used Nsdpfslxurmjx Amnelb

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Nledpfx Ajn Nv Tismnjb Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: excellent (used), CAMAM MO-4A double-sided oscillating drilling machine Number of spindles per side 3 Nodpfx Ajtp Tnzomnolb Tool mounting chuck basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material presses per side

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Specifications (indicative): Brand: DenoLift (Denocard) Nedpfxoyplqrs Amnslb Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Nodeyr Numepfx Amnelb Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Njdpjxpqm Rsfx Amnelb Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: C17037, saw blade diameter: 500 mm, cutting width (max.): 200 mm, CNC CUTTING CENTER WITH TILTING BLADE CAMAM MOD. TAC CNX – CE RULES - 1350mm x 200mm x 80mm capacity - Cutting thickness from 10mm to 80mm Nledpfx Aeywdzgomnsb - Cutting width from 10mm to 200mm - CNC controlled advancement speed - up to 60m/min - CNC controlled - +/- 60 degree rotation - 4kW saw motor with adjustable RPM - Saw blade diameter 500mm - Completely enclosed interlock saw cabin - Outfeed conveyor belt - Automatic bar feeder and magazine - Infeed length with loader max 3.000 mm - S/N C17037 - Year 2017

Year of construction: 2002, condition: used, 2002 Camam US/1C Chair Leg Equalizer. Bench cm. 70x70 Nljdsvcc Rlspfx Amneb

Condition: used, 2-spindle vertical drilling machine Nledpfsyg Ix Tsx Amnob

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Working dimensions: cm. 50x60 Nodpfoydb Hxex Amnjlb

Condition: used, Year of construction: 2004, Pneumatic press for upholstery, Camam brand, year 2004 (CE), used Nodpfxoyccuhe Amnjlb Dimensions and weight: Cm. 90*60*H 200. Weight 200 kg (1 piece)

Condition: used, Year of construction: 1997, 1997 Camam FMS/8A Chair Back Drilling Machine Nsdpsrfh Ehsfx Amnslb

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet Njdpfx Ashr Rp Sjmnslb lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: used, Single hobbing machines brand Camam, for grooving pins to be inserted into holes or mortises with glue Nlodpfjx Uqlyjx Amnjb

Condition: used, Year of construction: 1998, functionality: fully functional, overall weight: 2,060 kg, total height: 2,200 mm, total width: 3,500 mm, total length: 1,300 mm, SECOND-HAND HYDRAULIC CLAMP COUPLE FOR CHAIR ASSEMBLY CAMAM MOD. SIPM - CE - Hydraulic pump power HP 5.5 (kW 4.0) - Productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H Nedpfox Rrplex Amnslb - Weight kg 2060 - CE rules - Voltage: 380/50 - Year: 1998

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 177, SECOND-HAND BRUSHING MACHINE CAMAM MOD. CAM - CE RULES Njdpfsx Rn Tyox Amnelb - S/N 177 - Year 2000

Condition: refurbished (used), Double knurling machine with drilling unit, for spindles with central hole. Nljdpspk Taxjfx Amnjb Complete with loader, unloading belt and finished price containment.

Condition: refurbished (used), Camam ZS Single knurling machine for straight and round elements Nledpfx Amsx Dbnhjnsb

Condition: used, Camam vertical/horizontal mortising machine, model AF/12-B1, composed of 3 horizontal spindles and 3 vertical spindles per side, 8 oscillations, tilting benches, used, tested. Nljdpomf Eh Isfx Amneb

Condition: used, machine/vehicle number: 145, SECOND-HAND 2 TABLE MORTISER CAMAM MOD. MO/2A - 4 spindles - Volt. 380/50 Nljdpswrd D Dsfx Amnob - S/N 145