Used Calende Tuschierpresse for sale (163)

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t Njdpfx Acofhcc Hj Aswl dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressing force: 63 t, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Njdpfx Acjfhcc Uo Ajwl Pressure Speed:15 mm/sec. Travel:500 mm Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Njdpfsdxrqwex Ac Aewl Motor with energy efficiency level IE3 according to CE

Condition: as good as new (ex-display), Year of construction: 2018, pressing force: 110 t, pressure:110 t passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t Nedpfsfhcc Tex Ac Ajwl column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Year of construction: 2012, condition: reconditioned (used), functionality: fully functional, CALENDER SUITABLE FOR CONTINUOUS FABRICS: • Transfer printing. • Reactivation of direct inks. • Heat setting. • HEATED CYLINDER DIAMETER: 200 mm • HEATED CYLINDER WIDTH: 2000 mm • Working width: 1,850 mm • Total width: 3300 mm Nwodpfsz Dh Tbex Ac Aol • Total length: 2300 mm • Total height: 2100 mm

Year of construction: 2010, condition: used, functionality: fully functional, The Klieverik GTC81/1850SP FLOWLINE is designed for efficient single-piece transfer printing, but also supports cut sheet repeat jobs and roll-to-roll transfer printing. Maximum material width: 1650mm Nsdpfezaq E Njx Ac Aswl Speed: 0.1-2 m/s Drum: 195mm Maximum temperature: 220°C We use it very little, and it is in very good condition.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2019062, Used (2019), in very good condition termo printing calender with felt. Width: 2000 mm. Reliable Italian quality. Ideal for sublimation and textile finishing. Clean, properly maintained and fully functional. CHARACTERISTICS OF PRINTING CYLINDER: Diameter : 200 mm (7,87“). Width : 2.000 mm (78,74“). Working width: / 1.800 mm (70,87”) TECHNICAL DATA: Installed power: 14 kw/h Average electric consumption: 9 kw/h Compressed air pressure: 3-8 bar Mechanic speed: 0.1 - 1.7 m/min Overall dimensions: width 3.110 mm (122,44“). length 1.250 mm (49,21“) height 1.650 mm (64,96”). Net weight: 950 kg Machine produced according to CE rules TENSION CONTROLS: Tension control for printing material: Entry: brake with manual adjustment and manual textile tensioner Exit: tangential winding on felt Tension control for printing paper: Entry: disk brake with pneumatic adjustment. Exit: winding with pneumatic device Tension control for protection paper: Entry: disk brake with pneumatic adjustment. Exit: tangential winding on felt Nwsdpfxozuy Rvs Ac Asl Single motor NOMEX felt with manual tension adjustment system and automatic felt-centring device Incorporated system of felt protection in case of black out and/or compressed air lack

Condition: used, functionality: fully functional, Year of construction: 1972, Used CALANDRA, MECHANICAL POWERED, WITH 3 UPPER ROLLERS OF 140mm, SERTOM 2000x5mm. Overhauled with compliance and safety engineer inspection, ready in the warehouse for viewing and testing. Size: 3500*1000*1200H, Weight: about 1600 kg. Nodszh Dhxspfx Ac Aswl

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s Nwodpfx Astwmp Sec Asl ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm Njdpfxjy Ec H Ro Ac Aowl ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Year of construction: 1977, condition: good (used), machine/vehicle number: 12200, Cylinder diameter: 400 mm Cylinder length: 1000 mm Max. pressure between cylinders: 2 x 450 kN Nodpfxsy Ui Uyo Ac Aswl

Condition: used, functionality: fully functional, color: green, The calender consists of the following units: - A set of 4 rollers - A set of roller drives - Frames - A running gear - A control cabinet The set of rollers consists of 4 rollers of different diameters. The rollers are mounted on a common frame, which allows you to change their mutual position (change the gap between the rollers). The gap between rollers 1 and 2 is adjusted using adjustment screws driven by MRA-63 type worm gears. The gap between rollers 2 and 3 is adjusted manually by turning the adjustment screws. Each roller has an individual drive, allowing you to change the rotational speed. The rotational speed of the rollers and the thickness of the plate are set on the operating panel of the Calender control cabinet. A pressure roller and disc knives for cutting the outer edges of the plate are installed above the last roller (No. 4). The knife spacing is adjustable, which allows the production of boards of various widths. Roller diameter: Roller 1 – 515.00 mm Roller 2 – 315.00 mm Roller 3 – 315.00 mm Roller 4 – 355.00 mm Roller 5 – 95.00 mm Disc knife 6 – 200.00 mm - Roller width 230 cm - Roller working width 210 cm - Total width 300 cm - Height 250 cm - Extruder departure / arrival (calender-extruder) 70 cm - Length with arrival 350 cm Power supply - 3 x 400 V (32A) - Motors 4 x 0.75 kW Nwedowcxufspfx Ac Aol - Fans 2 x 0.25 kW - Pumps 2 x 1.1 kW - Access motors 2x 0.25 kW - Central pump 1 x 0.5 kW - Roller pressure motors 2 x 0.25 kW - Razor blade motors 2 x 0.15 kW

Condition: new, Year of construction: 2019, pressing force: 110 t, pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm Nwedpfxefxygtj Ac Asl pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Condition: new, machine/vehicle number: DF0178, pressing force: 500 t, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm Nwedpfx Aefxyh Uec Aol table height:700 mm :inklusiv ? :inklusiv ? :inklusiv ? :inklusiv ?

Year of construction: 2017, operating hours: 1,752 h, condition: excellent (used), functionality: fully functional, Calender Monti Antonio 72-3600 + Plotter Mimaki JV5 320s Calender Monti Antonio 72-3600 Calender in very good technical condition, regularly lubricated. Cylinder diameter: 200 mm Material width: 3,200 mm Required pressure: 6-8 bar Speed: 0.1 - 1.7 m/min Max. temperature: 230 °C Maximum power consumption: 19 kWh, average consumption: 13 kWh Operating hours: 1752h Meter reading: 58104m Nsdpot Rhmkofx Ac Aewl Included with the calender is the graphic printer plotter Mimaki JV5-320s: The machine is in very good technical condition, all nozzles are open, regularly cleaned. On 07/07/2023, all print heads and accessories were replaced: - DX5 print head – 4 pcs - Dampers – 32 pcs - Captops – 4 pcs - Pumps – 4 pcs - FPC tapes – 4 pcs - Sponges Approx. 1000 running meters have been printed since then. Total machine output: 13543m

Condition: new, Year of construction: 2019, machine/vehicle number: DF0325, pressing force: 40 t, pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Nodpfx Acofxykwe Aewl Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

Condition: new, Year of construction: 2019, machine/vehicle number: DF0319, pressing force: 125 t, pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6 t dimensions:2540 x 933 x 3000 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l Nsdpfx Acofxykpj Aswl speed rapid traverse:10 mm/sec column diameter:120 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0369, pressing force: 220 t, pressure:220 t passage width:1500 mm stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm Nwjdpfx Asfxyivjc Ael :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Nodpfehtm E Nsx Ac Aswl Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: new, machine/vehicle number: DF0177, pressing force: 315 t, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW Njdpfxofxyhis Ac Aowl work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Nsdpfx Asyiurroc Aewl

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t Njdpsd Ap Ugsfx Ac Aewl table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: used, Year of construction: 2019, pressing force: 200 t, pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Nwedpod E Irljfx Ac Aol Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch

Year of construction: 2010, condition: good (used), functionality: not functional, 4-Roll Rubber Calender, 14'' x 42'', L-type, for the production of inner linear and fabric coatings. It consists of a drive unit, TCUs, cooling rolls, and conveyor belts. Nwsdpfx Acezt Nkis Ael

Condition: good (used), Year of construction: 1981, Tuschierpresse Nwsdpfx Acezkbtkj Ajl Machine type: Tuschierpresse Reis TUS 90 Year: 1981 Equipment Schließkraft: 1.000 kN Motor: 380 V Max. Belastungen: untere Aufspannplatte: 7.000 kg obere Abschwenkplatte: 3.500 kg