Used Caenaho B Cccp Pa-09 Rd-09 110 V for sale (71,242)

Condition: good (used), Geared motor, electric motor, electric geared motor -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Quantity: 1 piece available Price: per piece Nodpfx Acoguzr Rs Aolg -Dimensions: 240/120/H200 mm -Weight: 6.2 kg

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: Nlsdpfjy A Ei Njx Ac Ajg • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: Nljdpfx Aey Tnzcec Aeg The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available. Nledpfx Ajy Uc I Hjc Ajg

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller, 20% discount when ordering more than one unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Nlsdpfx Acjzxbmte Asg

Condition: used, Big-bag emptying station (0.5 m³, injection blower) – Plastcompactor HV 50/110 (600–700 kg/h, 4 m³ silo with feed screw, agitator, discharge screw, DS drive 110 kW, 2 compacting discs Ø 500 mm with kneading bars and water cooling, Siemens S7) – Post-cutting mill SML 45/100-S3-2 (10 mm screen, 3x1 rotor/2 stator knives, shear cut, spray mist cooling, hydraulic opening, 45 kW) – Fine material separation with a zig-zag sifter and return system – Material discharge with a double big-bag holder MFT 45/350, blower 7.5 kW, cyclone. Nedpfx Aoz Aiuyoc Aolg

Condition: ready for operation (used), Year of construction: 2016, clamping force: 1,100 kN, screw diameter: 22 mm, Hydraulic injection moulding machine manufactured in 2016. This Krauss Maffei 110-180-180 CX V features a clamping force of 1,100 kN and a minimum mold height of 377 mm. It includes a screw diameter of 22 mm and a centering ring of 125 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 110-180-180 CX V machine we have for sale. Contact us for further details. • Space between columns: 530 x 470 mm • Minimum mold height: 377 mm • Centering ring: 125 mm Nledpfsz Dk Rvjx Ac Aog • Core pullers: 3 • Pneumatic valves: 2 • Programmable inputs: 3

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Nodjyxxayepfx Ac Aolg Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Control: Siemens PLC Year of manufacture: 2012 Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.

Condition: good (used), Year of construction: 2008, Used SCM Record 110 NT TVN Prisma Year of manufacture: 2008 (in operation since June 2009) 5-axis CNC machine Working area: 6110 x 1250 mm F18 drilling unit Rapid 24 tool changer Laser cross positioning aid UniClamps Reinforced vacuum pump, 250 m3 Chip conveyor Nlsdpfoztxzqsx Ac Asg Machine is available immediately, disassembled and stored.

Year of construction: 2017, condition: used, Used overhead crane system with vacuum lifting device Year of manufacture: 2017 Load capacity: 250 kg (at the lifting device) Crane travel: 6 m Bridge: 6 m Vacuum lifting device B 3 UW H K 250 V with 2 oval suction cups 500 x 2500 mm Vacuum generation: pneumatic with ejector Operating pressure: 7 bar filtered compressed air required Air consumption: approx. 7 NL/sec. with ABM electric chain hoist Lifting speed: 0...10 m/min, infinitely variable Nlodszc Agdspfx Ac Ajg Operation via special handle on the vacuum lifting device. The lifting movement is controlled infinitely variable via a frequency converter. Availability: short notice Storage location: Flörsheim

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible. Nsdpfxjw Ni Ibe Ac Aolg

Condition: good (used), Year of construction: 1978, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm Nsdpfx Acewnn U Ee Ajlg -Weight: 125 kg

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Nsded Nqlcopfx Ac Aslg Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm Nodpfx Acszn Aius Aelg

Condition: good (used), Year of construction: 2013, Lifting capacity: 500 kg. Can be swiveled from horizontal to vertical. Width: 1700 mm. Height: 1500 mm (with pallet). Depth: 1450 mm. Weight: 183 kg. Condition: good, second-hand Nlsdpfx Aex Dr D Hoc Asg

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-24699, professionally and completely overhauled and tested, comes with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Nlodpfx Aoi D Ipbjc Aeg

Condition: ready for operation (used), Indramat MAC 090A-0-ZD-4C/110-B-1/WI522LV permanent magnet motor, serial number as shown in the photo. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Nsdpfx Aoi D Ihqsc Aslg

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CNC Vertical Machining Center HERMLE B 300 V With Heidenhain iTNC 530 path control Year of manufacture: 12/2010 Travel ranges: X 800, Y 600, Z 500 Spindle speed range: 20 – 15,000 rpm, stepless With the following accessories: Nljdjzf Ik Eepfx Ac Ajg Fixed angular table, 1000 mm x 560 mm clamping surface Vertical tool changer with 30 magazine positions (SK 40) IKZ 40 bar Chip conveyor Coolant system Manual cabinet door, manual cabinet roof Polycarbonate safety screens Electronic thermal compensation iTNC 530 Electric hand control module HR 410 3D measuring probe Renishaw Control cabinet cooling unit (RITTAL) Spindle oil cooler 4 adjustable machine feet Operating manuals

Condition: ready for operation (used), Indramat MAC090C-0-GD-1-B / 110-A Permanent Magnet Motor, serial number: MAC090-49089, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Nljdolmtazspfx Ac Aog

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor, serial number: MAC090-13832, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Njdpfx Ajlmta Noc Aelg

Condition: used, Year of construction: 2015, x-travel 1300 mm y-travel 610 mm z-travel 650 mm control Siemens type 828 D Shop Mill Tool changer 24 Fach spindle taper: ISO 40 SK spindle turning speed range 8500 U/min table surface area 1300x610 mm Table load 1000 kg spindle power 15 kW total power requirement . KVA weight of the machine ca. 8 t Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light Nodpfx Aoyqtbzjc Aelg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), ABB IRC5 Controller, USED, 20% discount when ordering more than one unit. Njdpfx Acezxbnko Aelg DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Year of construction: 2026, condition: used, New: Yes Empty weight: 60 kg Dimensions of cargo space: 60 x 30 x 100 cm CE mark: yes Serial number: DPX-27505 Please contact Team DPX for more information Automatic Transfer Switch - ATS Panel - ATI Panel Nedpfxoy Dntgs Ac Aslg 160 Ampere - Applicable for generators up to 110 kVA

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor, part no. 223455, serial no. MAC090-59923. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Nlsdpfx Aslmta Eec Asg

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm Njdpszxlwcofx Ac Aolg dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *