Used Broaching Machine / Henning 03E for sale (64,788)

Condition: ready for operation (used), Vertical thread-rolling machine HENNING 03E Hnodpfezkv Euox Abkeu -Henning - Metzingen -Year of manufacture 1981 -Rolling length approx. 1100mm -Motor power 3KW -Coolant system Dimensions L x W x H 0.7 x 0.5 x 1.7 meters / Weight approx. 450 kg Subject to errors and omissions.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Hnsdpfxjzv D Rie Abkeu Drive system with a Stöber gearbox, providing infinitely variable speed control.

Condition: used, BROACHING MACHINE Hsdpfx Ast Hr Dfjbkenu

Condition: excellent (used), Type: U3E1000 Machine no.: 17098 Year of manufacture: 1982 Data: Hjdszvq Axjpfx Abkjnu Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t Hnjdpfoyfgc Isx Abksu - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Condition: used, Indexing table 400 mm hand Full set of tooling included (guide bars etc) Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg Hjdpfx Ajz D I Rmobkonu transport can be arranged

Condition: ready for operation (used), functionality: fully functional, Cable pulling machine / RAUSCH RS 6 /1300 with pulling extension & accessories -Ram stroke / stroke length - Standard 1300 mm (+ pulling extension) -Pulling force 6000 kg -Various cable pulling tools -Various accessories -Workbench Dimensions (disassembled) L x W x H 1.6 x 1.7 x 2.3 meters / Weight 3500 kg Hodpjz I Dbvjfx Abkonu Errors and omissions excepted.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Hnedpfx Abow Ighiokju Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,200 kg, total length: 2,500 mm, total width: 500 mm, total height: 1,200 mm, Spline broaching machine (internal broaching machine) VEB Maschinenfabrik "John Schehr", Meuselwitz, year of manufacture approx. 1955, with extensive accessories Condition: functional Year of manufacture: approx. 1955 Location: West Saxony Price: €3,000 (negotiable) Technical data: Manufacturer: VEB Maschinenfabrik "John Schehr", Meuselwitz, Leipzig district Manufacturing number: 6171 Total weight: approx. 2.2 t Broaching length: approx. 1,000 mm Type of current: three-phase, 50 Hz Operating voltage: 220 V Hjdjzyl E Njpfx Abkjnu Accessories: Extensive stock of broaching tools (various spline shapes/sizes) available Description: For sale is a historical spline broaching machine (horizontal internal broaching machine) from VEB Maschinenfabrik "John Schehr", Meuselwitz – a well-established, internationally recognized East German machine tool manufacturer. The machine is used to broach splines (e.g. keyways) in bores using broaching tools and has a broaching length of approximately 1,000 mm. The scope of delivery includes an extensive stock of broaching tools in various designs – a significant added value, as corresponding tools are hardly available on the market anymore. The machine is functional. Inspection and functional testing at the location in West Saxony are possible by arrangement. Price: €3,000 (negotiable) Other machines available from site liquidation Site takeover negotiable

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 17065, Manufacturer: henning Model: U6/1000 Machine no.: 17065 Year of construction: 1979 Weight: 1.100 kg General / technical data: used mechanical vertical broaching machine Henning, in working condition Tractive force: 6,000kg (60KN) Clearing speeds: 3m/min and 6m/min Return speed: 6m/min maximum stroke: 1,000mm maximum tool length: 1,200mm table size / work surface: 600x460mm / 480 x340mm Table aperture: Ø 170mm with eccentric table insert with Ø 90mm bore for standard broaching mandrels (Rausch system) Workpiece diameter: any Dimensions (h x w x d): 1,650mm x 1,200mm x 700mm (h= table height to floor without superstructure) Motor: 7.4 /10kw Power supply: 380 Volt / 50 HZ Hodpoup Uzfsfx Abkjnu Accessories / special equipment: - Integrated coolant system - Return circuit with double actuation mode - Machine documentation - Automatic clamping jaw opener in the lower drawbridge position (tool removal) - Tool clamping with universal clamping jaws for flat shanks DIN 1416 BL 6 Remark: The machine is in original condition, the function has been tested. The machine is mechanically driven by a trapezoidal threaded spindle and a geared motor. In contrast to most mechanically driven broaching machines in which the trapezoidal spindle forms the drive and guide element, this machine has additional guide columns. The machine is therefore additionally column-guided and very stable. The double spindle drive is ideal for a continuously constant cutting speed, even with higher tensile forces. The machine is in our warehouse and can be inspected under power.

Condition: good (used), functionality: fully functional, Year of construction: 1970, overall weight: 2,500 kg, broaching length: 300 mm, total length: 2,000 mm, total width: 2,000 mm, GSP M743 mortising machine Travel: 0 to 300 Stroke: 3 to 52 Weight: 2.5 tons Rapid traverses on both axes Rapid traverse on table rotation, diameter 700 In very good condition Hedpfjz Ingvsx Abkonu

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. Hsdoyudxxopfx Abkonu - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac * Model: H 1000

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection Hnsdoytvyxjpfx Abkju - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 50 h, overall weight: 640 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece diameter (max.): 400 mm, de machine is in nieuwstaat. neem contact op voor meer info. Hnedpfxozugnhe Abksu

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Hsdpez Hq Aksfx Abksnu Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Hedpfsz Hl U Ijx Abkenu Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: good (used), Year of construction: 1970, pulling force - max. 2 t max. ram stroke 400 mm max. workpiece diameter 1000 mm workpiece weight 10 t clamping table 900 x 680 mm total power requirement 5,5 kW Hsdpfx Aoz Ic A Eobkonu weight of the machine ca. 1,7 t dimensions of the machine ca. 1,3 x 1,2 x 1,5 m

Condition: ready for operation (used), Pulling machine RAUSCH RS 6-1300 with extensive accessories -Ram stroke / pulling length 1300mm -Pulling force 6000kg -Incl. 38x clearing pins -Incl. 95x guide bushings -Work bench -Setting plates -Crane -Platform -2x tool cabinets Dimensions: L x W x H 1.6 x 1.7 x 2.3 meters / Weight: 2500kg Errors and omissions excepted. Hedpfx Absza U Alokonu

Condition: used, Drawing machine / stretching machine KARL KLINK RSI 2.5 EH -Pulling force 2500 kg -Stretching speed 1 mm to 9 mm/min (infinitely variable) -Stroke length 800 mm -Max. workpiece diameter approx. 250 mm -Motor power approx. 3 kW -Coolant system -Pulling force indicator -Pulling force limitation -Various guide bushings (see pictures) -Machine feet Dimensions: L x W x H 1.1 x 0.7 x 2 meters / Weight 1600 kg Hnsdpfx Ajzwdrvjbkeu Errors and omissions excepted.

Condition: used, Year of construction: 1987, Rated current: 14A, rated power: 5.4kW, weight: 920kg, with documentation. An on-site inspection is possible. Hnodpfoz S Iv Hsx Abkeu

Year of construction: 1968, condition: used, functionality: fully functional, machine/vehicle number: 2276, Karl Klink HW 20 Reaming Machine For sale is a functional Karl Klink HW 20 reaming machine. This machine comes from the renowned Karl Klink tool machine factory and was used in industrial applications until recently. It is suitable for precise reaming operations in single-part and series production. Technical Data Hjdpszvf Trefx Abksnu Manufacturer: Karl Klink Tool Machine Factory Model: HW 20 Machine Type: Reaming Machine Year of Manufacture: 1968 Weight: approx. 5,500 kg Connected Load: approx. 19 kVA Condition Fully functional Used Inspection possible by appointment Sale due to changes in equipment Delivery FCA location Dismantling and transport by the buyer Overhead crane and forklift can be made available for loading upon agreement.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Hnedpfx Asxxb Rrobkeu Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Keyway cutting machine FRÖMAG RAPIDA 463 incl. INDEXING TABLE - Machinable keyway width: 3 - 63mm - Maximum keyway length: 600mm - INDEXING TABLE - For bores from 10 - 500mm Hedszl Aiispfx Abkjnu - Feed rate: 0.01 - 0.25mm - Cutting speed, infinitely adjustable: 2 - 22 meters/min - Return speed / constant: 50 meters/min - Load capacity max. 3000 kg - Connection power: 4.6 kW - Includes work platform - Various keyway cutters / accessories & tool cabinet Dimensions: L x W x H 1.6 x 1.5 x 2.3 meters / Weight 3500 kg Errors and omissions excepted.

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Milling Machine Hnjdpfx Abjzv Edqsksu - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Keyway length in a single pass: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good overall condition, ready for operation Dimensions: L x W x H 0.9 x 0.6 x 1.5 meters / Weight: 300 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Hjdpfoz St Hwex Abkjnu Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.