Used Booston - Butterfly Table From Stock 12M for sale (45,267)

Year of construction: 2026, condition: new, Butterfly table 12m long - available from stock! available immediately! BOOSTON - We are a manufacturer of machinery and equipment for timber frame prefab house manufacturing. Buy directly from the manufacturer! Nodomrtx Uopfx An Iold Quality guarantee, short lead time. We offer an assembly table - hydraulic (butterfly table) consisting of two wings with a length of 12.0m (available models from 6m to 12m). -Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm - Permissible load on the table: 95kg/1m2 (for a 12m table - total of 3500kg) - Sturdy powder-coated steel construction - Holes for mounting SD-01 clamping cylinders

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Njdpfx Ansthuzps Ijld - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Nledpsl R Hz Sjfx An Ied Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Nodpfjl R Hy Aox An Ijld Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Nljdpfx Asktffzsn Iod Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU, laser type: fiber laser, laser source manufacturer: MAX, laser power: 12,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 200 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 12 kW (16.32 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 6,230 kg, total length: 8,240 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 12kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 12kW is a high-performance fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideal for metal fabrication companies, industrial manufacturers, and job shops that require high cutting performance, reliable precision, and efficient production. The machine is equipped with a 12kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, it offers strong cutting performance for medium and thicker sheet metal thicknesses. The SF3015H series is designed as a high-performance platform and can be configured with laser powers up to 30kW. This makes the series suitable for companies with increasing production requirements. Your advantages: • Working area: 3000 × 1500 mm • Laser power: 12kW • Series available up to 30kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2.8G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Fully enclosed design • Double exchange table • Heavy-duty, thermally insulated hollow bed • Intelligent spiral negative pressure extraction system • Automatic gas distribution system • CNC cutting system with process database • TÜV-CE certified The fully enclosed design increases operational safety. The double exchange table reduces loading and unloading times and supports a more efficient production process. The robust hollow bed and high-strength aluminum beam ensure stable operation and long-term cutting accuracy. The intelligent extraction system contributes to a cleaner production environment. The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, a local spare parts warehouse is available in Germany to enable fast service support and reduce potential downtime. Nedpewpq Drjfx An Iold The SF3015H 12kW is a powerful solution for companies looking for a modern, readily available laser cutting system with TÜV-CE certification and professional local service in Germany.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: BOCHU / FSCUT, laser type: fiber laser, laser source manufacturer: MAX, laser source model: MAX 6kW, laser power: 6,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 360 mm, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,080 mm, travel distance Z-axis: 360 mm, cutting speed: 20,000 mm/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 3,000 kg, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,654 kg, total length: 8,440 mm, total width: 2,270 mm, total height: 2,340 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, SENFENG SF3015H 6kW Fiber Laser Cutting Machine – Available Immediately from Stock in Germany The SENFENG SF3015H 6kW is a powerful and efficient fiber laser cutting machine for professional sheet metal processing. With a working area of 3000 × 1500 mm, it is ideally suited for metal fabrication companies, job shops, and industrial manufacturers who require high cutting speeds, stable accuracy, and reliable production performance. The machine is equipped with a 6kW fiber laser source and is suitable for cutting stainless steel, structural steel, aluminum, brass, and other metal sheets. Depending on the material, gas type, and cutting requirements, thin to thicker sheets can be processed precisely and with clean cut quality. The H-series features a fully enclosed design and a dual shuttle table. This increases operational safety and reduces loading and unloading times. The heavy-duty, thermally insulated hollow bed ensures high stability and a long service life. The high-strength aluminum beam supports fast, dynamic movements. The intelligent spiral vacuum extraction system improves smoke extraction and contributes to a cleaner production environment. Technical highlights: • Working area: 3000 × 1500 mm • Laser power: 6kW • X/Y positioning accuracy: ±0.05 mm • X/Y repeatability accuracy: ±0.02 mm • Maximum speed: up to 200 m/min • Maximum acceleration: 2G • Maximum table load: 3000 kg • Machine dimensions: approx. 8440 × 2270 × 2340 mm • Power supply: 3-phase 380V / 50Hz • Fully enclosed design • Dual shuttle table • Automatic gas distribution system • Intelligent CNC cutting system with process database Nlsdpfxok R T Nme An Ied • TÜV-CE certified The automatic auxiliary gas selection and pressure control are performed via the CNC program. This reduces manual effort and supports stable cutting quality. The intelligent, bus-based CNC system integrates motion control, laser source control, and gas control, enabling easy operation and efficient cutting. The machine is currently in stock at SENFENG Germany and is available for short-term delivery. SENFENG Germany has its own after-sales team and offers installation, commissioning, operator training, and on-site technical service. In addition, SENFENG Germany maintains a local spare parts warehouse to enable quick service support and reduce potential downtime. The SF3015H 6kW is a strong solution for companies looking for a modern, high-performance laser cutting system with local availability, TÜV-CE certification, and professional service in Germany.

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Nodjvf I Ibspfx An Isld Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 24 kg, total height: 1,000 mm, total width: 330 mm, total length: 530 mm, The MultiTest 2.5dV is one of the most widely supplied tensile and compression test stands. The tester is robust, precise, and fully customizable with load cells, grips, and software. The MultiTest 2.5dV can be fitted with load cells ranging from 2 N to 2.5 kN, depending on your requirements. The VectorPro Lite software is highly intuitive and features a clear interface. This makes the tester suitable not only for laboratories and inspection rooms, but also for use directly in production environments. When using the software, all data is automatically stored and can be retrieved at any time. Without the software, the tester operates as a stand-alone device and can transmit measurement values to a computer in multiple ways. The price includes a load cell of your choice, cables, delivery in the Netherlands and Belgium, commissioning, and training. We offer a 2-year warranty. The VectorPro Lite software is available for an additional €1,000, and grips are not included in the price. Nlsdpfxjx Apntj An Isd

Year of construction: 2022, condition: new, machine/vehicle number: AN2301154, Stationary power generator - immediately available from stock Our standby power generator is an important part of your company's power grid. It is always ready for use and can step in immediately in the event of a power interruption. Electrical data: Rated voltage and frequency: 400 V / 50 Hz Supply power (PRP): 60 kVA / 48 kW Fuel consumption: Tank capacity: 100 liters Fuel autonomy at 75% load: 8h Noise level: Sound pressure level (LPA) at 7m: 68 dB(A) Njdpfel R Hv Aex An Ield Dimensions and weight: Length x width x height: 2165 x 900 x 1428.5 mm Weight: 1210 kg Immediately available pre-configured with the following optional equipment: Coolant preheating Automatic control panel with Battl. 3 way fuel valve for operation from external tank Optional junction box for emergency power operation is also available.

Condition: used, New compressed air refrigeration dryer, unused compressed air dryer from stock Compressed air dehumidifier SMC type IDFA3E-23 Compressed air dryer, compressed air dehumidifier Serial No.: PP0213S Year of manufacture: 2011 SMC compressed air dryer IDFA size 3E Flow rate per hour: 12,000 liters/h (12 m³/h) Flow rate per minute: 200 liters/min. Operating pressure max. 10 bar Nljdpfx Aeyif I Uon Iod Operating pressure: 0.15 to 1.0 MPa (manufacturer's specification) Refrigerant: R134a Temperature range: 5°C to 50°C Power consumption: 180 watts Power supply: 230 volts, 50 Hz, 1.2 amps Connection pipe thread: 3/8" - Stainless steel heat exchanger, air-cooled condenser - Condensate separator with automatic drain - Condensate drainage via hose Space required (L x W x H): 410 x 226 x 473 mm Weight: 18 kg New, unused, in mint condition from stock

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, WORKBENCH FOR ASSEMBLING WOODEN FRAMES Direct sale from the manufacturer BOOSTON MACHINERY CARPENTER'S BENCH · JOINER'S BENCH · ASSEMBLY TABLE FOR PREFABRICATION Available lengths: 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12.0m; 13.5m; 15.0m Nlodpfx Aeyk H N Ejn Iod DIMENSIONS - Working length: 6000mm (other lengths available) - Standard width: 3600mm - Working height: 700mm - Workbench for self-assembly - shipped on a large pallet (cost saving for you) - Mounting holes for pneumatic clamps SD-01 - Option to expand with additional modules Additional options: - SD-01 pneumatic pressure cylinders - Option for pneumatically lifted rollers for horizontal transport (2 roller rows) - LS-01 base profile

Condition: new, Year of construction: 2026, Butterfly Table BS20 Randek butterfly table BS20 is an efficient tool when producing prefabricated walls, roofs, floors, gable ends in timber or steel frame. The tables can be used separate or placed in a line. High quality is achieved due to the clamping function that guarantees the squaring of the building component. The turning of the building element is done with a controlled automatic process. High productivity is achieved; the working table is optimized for prefabricated house production. Functional description: The following processes can be done in the working table / butterfly table: • Automatic turning of building component, the up raiser table raises and flips over the building component during a controlled process to the receiver table, and the building component is turned. • Squaring of building component, the pneumatically clamping function on the long side of the table presses the building component into a squared high quality building component. • The table is developed in order to efficiently perform the following processes: building of framework, put on and nail sheets, nailing of plastic of paper foil and insulation of building component. Technical description: • Length: Available in lengths of 6000, 7500, 9000 and 12000 mm • Width adjustment between 2250 – 3100 mm, the adjustment between different widths is easily done with a manual control • The tables are hydraulically appraisable up to 91 degrees • Pneumatically squaring function on the up raiser table on the long side, stoppers height 160 mm • The tables are covered with plywood sheets as far as technically possible, the sheets makes it possible to put on sub components and beams easily directly on the table • The tables are built in strong steel profiles • The working height of the tables is optimal 620 mm • Equipped with alongside c-profiles for possible placement of steer stoppers for beam placement • The tables are completely delivered ready for assembly with very simple installation process. The customer is responsible for supply of motor cover and switcher for hydraulic unit (3kW) • The tables are designed to make it possible to add a multi function working bridge with nailing or drilling function • The distance between the tables shall be approximately 1100 mm, depending on the thickness of the building component Security: • The machine is equipped with safety stop CE-marked Nlodpfx Anj Nn Hyj Ijd Benefits: • Squared building components due to clamping function • Controlled and automatic turning of the building component • Ideal working height • Flexible adjustment in width

Condition: new, functionality: fully functional, color: orange, overall weight: 2,300 kg, Year of construction: 2025, Pulverizer attachment with rotation from stock Suitable with 20-25-30-35tons excavator Nlodpfx Anjy Sfnwo Iod For detailed information please contact us

Condition: new, The bucket is available from stock. Suitable for quarries and mining operations. A great opportunity to get acquainted with a high-quality bucket Nsdpfxjy Dz U Ro An Ijld Edge Length: 1550mm Capacity: 1.75m3 For detailed information please contact us

Condition: new, Year of construction: 2023, Layout: Shears Empty weight: 1.700 kg Attachment suited for: Construction machines Warranty: 6 months Selling price: € 12.000, US$ 12.630 MECHANICAL PULVERIZER FOR SALE FROM STOCK SUITABLE TO WORK IN THE DESTRUCTION ZONE MACHINING PROCESS WILL BE DONE AND DELIVERED ACCORDING TO THE MACHINE YOU HAVE ATTACHMENT WEIGHT: 1700KG The mechanical pulverizer is a cost-effective way of demolishing concrete structures and processing concrete on site, reducing transport cost and increasing productivity. Simple installation, no hydraulics needed. Direct-mount and coupler styles available. Fully greaseable bushings Replaceable four-way rotatable rebar cutters as standard equipment. Njdjn Tm A Eopfx An Ijld

Condition: new, GALEN Salt Spreader for truck Nedporcbztefx An Iold 7m³ capacity of bunker. Stainless steel bunker structure. Speed adjustable chain conveyor. Foldable spreader unit with adjustable height and angle. Easily accessible 2400lt solution tanks, large solution filling pipe. High pressure hydraulic pump for drive system. Only 1 piece stock salt spreader and snow plow

Condition: new, Length: 3000mm from stock Nljdercb A Rspfx An Ied

Condition: like new (used), Swing Chuck Parts from Headstock 51:36 388/01 Nlodeyrz Tnepfx An Isd Manufacturer: unknown Type: Swing Chuck Parts from Headstock Designation: Swing Chuck Parts from Headstock Transmission Ratio: 51:36 Reference: 388/01 Article Number: 156116 Part Number: 50010002252 Condition: unused / original packaging Quantity: 2 pieces

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. Nlodpfx Aoh Hfldsn Ijd RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, Roller support for saw, composed of: 2 supports: L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm 1 support fitted on machine side (see photo): L 3000 mm x Max width 550 mm x Mini height 800 mm - Max height 950 mm Rolls width: 450 mm Nljdozmxvuspfx An Ijd

Condition: like new (used), 800 m² Schäfer R3000 storage racking system, 3 levels Used, in excellent condition, like new, see pictures. 3-level shelving system from Schäfer Including lift Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 levels Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, details and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Nlsdpfx Ajhzw Ivsn Isd Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer loads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough cleaning. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), Niemann Butterfly VKDVB 332-20 Dissolver Vacuum version with Busch vacuum pump Power 15 kW with wall scraper Speed range 0-240 rpm, adjustable via frequency converter Control cabinet 3 stainless steel mixing tanks, each 300 l Nledpfswmaxmjx An Ied Matching: Niemann/Gehalin H 500 squeezing device D = 700 mm for 300 l mixing tank Top condition, straight from production!

Condition: new, Year of construction: 2026, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. Njdpfx Ael D Nkzsn Isld CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION * Pneumatic drive – working pressure 7–9 BAR * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers AVAILABLE IMMEDIATELY – we ship to every country in EUROPE

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Nedpfx Anoxvwcxo Ijld Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)