Used Board Edger for sale (3,300)

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit. Kjdpfx Abertn Nzsljlt

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm Kljdenygvrjpfx Ablot 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Year of construction: 1992, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 160 mm, saw blade diameter: 500 mm, total length: 7,600 mm, overall weight: 1,500 kg, extraction connection diameter: 160 mm, feed length X-axis: 6,000 mm, working height: 160 mm, – year of production 1992 – smooth cutting speed adjustment TECHNICAL PARAMETERS: – cutting length: 6000 mm – max. cutting width: 580 mm – max. cutting height: 160 mm – main engine: 11 kW – max. blade diameter: 500 mm Kljdpsvntdmefx Ablet – unit travel speed adjustment – linear laser – quick blade return – power supply: 400V – nozzle diameter: 160 mm – work table dimensions: 1110 x 7300 mm – pawl – hydraulic pump: 4 kW – machine dimensions (length / width / height): 760 / 160 / 210 cm – weight: ~ 1500 kg

Year of construction: 1990, condition: excellent (used), A KT-53 Board Edger that is rebuilt to a KT-52 Kodpfx Abehuiwujlolt

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Ksdpfxjrzakms Ablolt Bottom Rollers : 5 x Ø135 mm (120)

Condition: new, Year of construction: 2026, BOARD EDEGR ANGOMAC ideal for wet and dry wood passage from 600 mm to 1300 mm max depth of cut from 10 mm to 160 mm Kjdpfsd Tka Hjx Ablelt until no.4 mobile blades Simple or highly automated versions are available.

Condition: used, In this offer you are purchasing a used smartboard ‘SMART Board GX086’ Klodpfxovca Ibe Ablot Object of sale: 1 x SMART Board GX086 with the following specification: With 20 interaction points, teachers and students can easily interact Award-winning desktop software to create engaging learning experiences Easy integration of student devices No computer required Diagonal: 86 inches (218 cm) Max. brightness: 400 cd/m² Native resolution: 3840 x 2160 4K UHD Response time: 8 ms Aspect ratio: 16:9 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may show. The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), Year of construction: 2020, In this offer you purchase a used collaboration board "Cisco Webex Board 85S" Object of sale: Kledeqydw Iepfx Abljt 1 x Cisco Webex Board 85S: approx. 21 boards in stock also available in size 70" and 55" Without stand/wall mount The Webex® Board is an all-in-one device that offers everything you need to collaborate with your teams in physical meeting rooms. You can present wirelessly, use whiteboards and make video and audio calls. And it securely connects to your virtual teams via the Webex service or via your Webex app-enabled devices, so you can take your meetings and content on the road. Condition: This offer is for a used device that may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for functionality Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Klsdpfsy R Npcsx Ablet Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), emtest / AMETEK Automotive EMC Test System incl. Laptop & Software Manufacturer: emtest / AMETEK Design: Automotive EMC / on-board network testing system Format: Mobile 19" industrial cabinet For sale is a professional test and simulation system from emtest / AMETEK, designed for industrial applications in the fields of automotive, electronics testing, on-board network simulation, and EMC/EMI test technology. The system is supplied with a laptop featuring pre-installed control and test software, making it ideal for professional laboratory, development, and test bench use. The system comprises several integrated test modules, cooling fan units, as well as various power, control, and interface components. Visibly identifiable components: Module 1: emtest AutoWave Module 2: emtest VDS 200Q Display designation: VDS 200Q100.2 Function according to display: Voltage Drop Simulator Serial number on display: SWN 001638 AutoWave display: Version 8.03.05 Out: 2 / In: 0 VDS 200Q display: DC Supply Waveforms Firmware: V2.02.00 Generator: V2.01.01 Additional model designation (from documentation): VDS 200Q100.2-208 Connections / Interfaces: - Ethernet - IEEE 488 - USB VDS - Frame Bus In / Frame Bus Out - Analog In - AutoWave CH1 / CH2 / CH4 - 0–10 V connection - DC output / output connectors Kljdpfjy Rlbhex Ablet - CEE power plug - Emergency stop switch Features: - Mobile industrial/19" cabinet - Multiple integrated cooling fans - Front control and terminal panels - Rear power and interface connections - Side-mounted emergency stop switch - Industrial-grade build for laboratory, development, and test bench applications Potential application areas: - Automotive test engineering - On-board network simulation - Voltage drop simulation - Electronics and component testing - EMC/EMI laboratory - Research and development - Quality assurance - Test bench and measurement applications Technical notes: - Four-quadrant voltage drop simulator - Suitable for automotive voltage profile testing - Supports various automotive test standards, such as LV 124, LV 148, ISO 7637-2, ISO 16750, and similar standards - Output range per documentation: -20 V to +80 V - Bandwidth up to 250 kHz Condition: Used device with age- and use-related signs of wear. See pictures for cosmetic condition. Unit powers on; displays are active. A full technical function test under load has not been performed. Dimensions & weight: Exact dimensions and weight have not been established. Due to its design as a mobile industrial cabinet, assume corresponding industrial-grade weight. Exact measurements and weights can be provided upon request. Scope of delivery: - emtest / AMETEK test system in a mobile industrial cabinet - Laptop with installed control and test software - AutoWave module - VDS 200Q / VDS 200Q100.2 module - Built-in fan and connection units - Scope of delivery as shown in images Notes: - Inspection possible by prior appointment. - Loading can be arranged. Commercial sale – sold without warranty. Subject to changes and errors.

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Kjdpfx Abei Ecipsljlt

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Kljdpfx Absi Ecitelst

Condition: ready for operation (used), Philips 4022 228 3020 Input Out Board, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Kodpfx Aboi Eciwelolt

Condition: ready for operation (used), Bosch 1070068008-102 Servo i Module Circuit Board, SN:001453948, used, minor signs of wear, 100% functional, scope of delivery as per photos Ksdpfxei D T S Io Ablelt

Condition: new, Fanuc A20B-8100C - A20B-8100 /C PCB-PMC C Languarde Board, serial number as per photo, unused in original packaging, 100% functional, scope of delivery as per photos Kjdpoi D U Hpefx Ablolt

Condition: ready for operation (used), Siemens 462007.7605.02 Board from Siemens 6SC6115-5VA01, used, minor signs of use, 100% functional, scope of delivery as per photos Kljdpfei Edbnsx Abljt

Condition: ready for operation (used), Adept Technology 10337-15200 Servo Amplifier Control Robot Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kodpfx Asi D Tt Eeblolt

Condition: ready for operation (used), Brother B521104-2 Board from Brother TC-321 , used, good condition, 100% functional Ksdpfxji D Uk Hs Ablslt

Condition: new, Siemens 6FC5114-0AA02-0AA2 Central Service Board Version: T Serial number: T-M42032780 + 570 514.9102.02 Version: H, unused in opened original packaging, 100% functional, scope of delivery as per photos Klsdsy Nr D Tepfx Ablst

Condition: ready for operation (used), Mitsubishi MB974A Operation Board SN:9404007, used, normal signs of use, 100% functional, scope of delivery as per photos Ksdei Eb Npopfx Ablelt

Condition: new, Siemens 6FX1121-8BB02 Sinumerik Sirotec Circuit Board < unused > in opened OVP 100 % functional Kjdpfxei Ed Rko Ablolt

Condition: new, Kontron CP603 PC-Board SN:248072028, unused, 100% functional, scope of delivery as per photos Kledpfx Aoi Ebwpsblst

Condition: ready for operation (used), Brother B521169-3 Circuit Board from Brother TC-321, serial no. according to photo, used, good condition, 100% functional Klodei D Ulkspfx Abljt

Condition: ready for operation (used), Fanuc A16B-3200-0042 / 02A - A16B-3200-0042/02A CPU Board, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Kledoi D U D Rjpfx Abljt

Condition: ready for operation (used), Janich&Klass AMT CPU Board 486DX Rev. 1.1 ,used, good condition, 100% working, scope of supply according to photos Kjdpfx Abji Ebuielelt