Used Blitz Bsd 30-75 for sale (29,664)

Condition: good (used), Compressor Blitz BSD 30-75 Overpressure 10 bar Kledpfjvzxklsx Anwsu Speed 2660 Volume flow 11.3 m3/min

Condition: used, Year of construction: 1996, output 30 kW suction power 4.200 l/min turning speeds 5.092 U/min overpressure 10 bar dimensions of machine L x W x H 1,72 x 0,90 x 1,60 m Klodoxu Ntaepfx Anweu

Condition: good (used), Compressor Blitz BSD 30-110 1 stage Kodpfx Anjvzxg Hewjlu 2770 rpm 15800 l/min 10 bar

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW Klodpfezcbyvjx Anwju - main motor: 90 kW - reverse gear - auto-reverse - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2002, Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Klodpfxokvnc Ss Anwju

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, year of manufacture 2007 * Unladen weight: 9,500 kg -----Internal vehicle number: 10757----Errors and prior sale excepted. WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp Kedpowbyphefx Anwslu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, immediately available - according to DIN EN 1539 for solvent-based substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also available as fixed connection (fuse protection 35 or 50 A required) Kljdpfxjiq Uv Ns Anwsu - incl. 1 piece mesh shelf - Weight 550 kg - Documentation Inspection in our warehouse by appointment. Oven, ovens, industrial oven, circulating air oven, chamber circulating air oven, tempering oven, heat oven, drying oven, conditioning oven, paint dryer, solvent oven

Condition: excellent (used), Year of construction: 2006, Single-screw extruder Battenfeld BEX 1-75-30:B with co-extruder BEX 35-30:B Application for PE, PP Year of manufacture 2006 Screw RPM 220 Screw diameter 75 mm Drive Baumüller 205 KW, RPM 2.450 Total output approx. 850 kg/h The extruder was converted to frequency drive by Battenfeld in 2014, new three-phase motor and frequency converter Gearbox was overhauled in July 2024 Condition: it is in very good condition Last application PE pipes Battenfeld co-extruder BEX 1-35-30:B Application PE PIPES Screws RPM 240 Connection value: 69 Kva Drive 35 KW Output approx. 120 kg/h Kedpfx Aeug Edkonwolu Year of manufacture: 2010 The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6 Germany

Year of construction: 2000, condition: ready for operation (used), Various smaller workshop metalworking machines from various manufacturers are available. 1) Brush machine RSA STL, year of manufacture: 1979. 2) Belt grinder Flott BSM 75. 3) Pull saw Graule ZS 85, year of manufacture: 1994. 4) Belt grinder Ludwig Gartner AZ2N. 5) Band saw Raim 360, year of manufacture: 1995. 6) Column drilling machine Quantum B 30 GS, year of manufacture: 2005. 7) Belt grinding machine HM TAS 75, year of manufacture: 2000. 8) Assembly band saw Berg & Schmid PBS 148. 9) Pull saw Graule ZS 200 N-S, year of manufacture: 2015. 10) Aluminum circular saw MEP Cobra 350 MA. 11) Notching saw Graule AS 450-D, year of manufacture: 2003. 12) Corner crimping press Rapid HP-205, year of manufacture: 1995. 13) Hydraulic press Schüco. 14) Notching saw Graule AS 450, year of manufacture: 2000. 15) Tie bar punching machine Schüco LA 10, year of manufacture: 2020. An on-site inspection is possible. A package sale of all items is preferred. Kedsyu T Ehspfx Anwolu

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure jetting unit, high-pressure inbuilt cleaner mounted on a hot-dip galvanized and painted high-grade steel frame with forklift sleeves, suitable for installation in commercial vehicles. Similar to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Dry weight without water tank: approx. 300 kg Dry weight with 400 l water tank: approx. 320 kg Dry weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW ENGINE: - Manufacturer: Vanguard - Model: 35 HP - Fuel: Petrol - Max. Power: 35 HP (26 kW) CONTROL PANEL: - Start button - Operating hours counter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass On/Off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety system to prevent the high-pressure pump from running dry with automatic shutoff. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½” and 80 m 3/8" high-pressure hose - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual Kedpfx Anjf Arugewjlu LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control; - Engine On/Off; - Bypass On/Off; - Speed control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for remote control; - 300, 400, 500, or 800 l polyethylene water tank (with steel frame); OPTIONS ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½” high-pressure hose; - 50, 60, or 80 m 3/8” high-pressure hose with G3/4” connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to a hydrant; - UNI 45 kit; - Version with 2 high-pressure reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit with swivel joint and quick coupling; - High-pressure lance kit with fan nozzle 15° / rotating nozzle; - High-flow lance kit; - Rotating nozzle kit; - Twin-head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Step cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; - Further accessories upon request

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Klodsi Eaa Rjpfx Anwju

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Kjdpox Erlpofx Anwjlu

Condition: ready for operation (used), Bosch SM 15/30-TC 1 servo module 1070075975-101 SN:001526370, used, in good condition, 100% fully functional, scope of delivery as per photos. Kedpfx Ajy Np H Eonwelu

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high-speed spindle SP: 12-18-30000 rpm, serial number: R336458, used, normal signs of wear, 100% functional, scope of delivery as per photos Ksdpfx Anoi Eaa Hjwslu

Condition: used, Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 160 mm, turning diameter over bed slide: 330 mm, swing diameter over cross slide: 160 mm, center height: 165 mm, swing diameter over bed slide: 330 mm, total length: 1,750 mm, total width: 1,350 mm, total height: 1,670 mm, overall weight: 1,300 kg, distance between centers: 750 mm, workpiece length between centers: 750 mm, For sale is a WEILER C 30 x 750 NC lathe. Machine type: C 30 X 750 Machine number: 0F 03 Year of manufacture: 2019 Machine weight: 1300 kg Design: 2 Size: small •3-jaw chuck •Various chuck jaws •11 tool holders Kedjy U Iu Sspfx Anwolu •Tailstock •Center distance: 750 mm •Center height: 165 mm •Swinging diameter over bed: 330 mm •Swinging diameter over compound slide: 160 mm •Turning tool cross-section (height x width): 20 x 20 mm •Dimensions: -Length: 1750 mm -Width: 1350 mm -Height: 1670 mm If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm Kljdpfx Anok Aa Ukewsu belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Kjdsk Abuijpfx Anwslu

Condition: used, Year of construction: 2019, US-2000 AST-MDM Arch size 700x750 mm Band width 30 mm Ksdswrp Hkjpfx Anwolu The US-2000 AST-MDM enables high cycle performance. With its dynamic high-speed band insertion and retraction by means of a brushless motor, the machine achieves up to 30 bandings/minute. Thanks to package height detection, product memory, and band centering, the band is applied to the product with precision and very gently. Shipping cartons can therefore be tightly banded without damaging the edges. The AST unit operates wear-free.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Capacity 30 t Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm CNC control: Euromac Eurowin 6-station multitool + with 6-station die holder Kodpfx Aeyxmhlenwslu

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW Kedpfx Ajyzr Tfjnwolu - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Tandem cargo bike, load rollers, heavy-duty rollers, heavy-duty wheel, tires, solid rubber tires -Heavy-duty wheel: Double solid rubber tire Kedslyvcxepfx Anwolu -Tire type: 415/75-305 -Receipt: Ø 90 x 58 mm -Bolt circle: Ø 220 mm -Dimensions: Ø 415 x 215 mm Quantity: 1 piece available -Weight: 49 kg

Condition: new, Year of construction: 2026, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm Klodpfx Ansxaayhewju column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: used, Year of construction: 1971, x-travel 13000 mm y-travel 2750 mm z-travel 3000 mm turning speeds 600 U/min spindle taper ISO 50 milling head 4 No. 11137 The tech. Data are manufacturer or operator information and therefore non- Kljdpfoyqvl Aox Anweu binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks Ksdpfxev Ta Dkj Anwolu -Manufacturer: Bosch, double-acting hydraulic cylinder, stroke 75 mm -Type: Piston rod: Ø 20 mm / M14 -Holes: Ø 20 mm -Dimensions: Ø 65 x 300 mm -Weight: 3.0 kg

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -2x prisms: as a set Kedpfx Ajd Edfqsnwjlu -Price: for one set -Dimensions: 130/75/H150 mm -Weight: 10 kg