Used Berthiez Vertical Cnc Lathe for sale (17,110)

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Gbjdpfx Aez N H Enoiveu Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1981, Vertical CNC lathe Make: BERTHIEZ Type: TFM 160 Year: 1981 / retrofitted in 2009 CNC: Siemens 840 DSL Serial number: 133216 Specifications: Table diameter: 1,600 mm Maximum turning diameter: 1,880 mm Maximum machinable height: 1,600 mm Vertical travel of the cross slide: 1,300 mm Table rotation speeds: 2 to 250 rpm Gjdpfx Aiozgtmnevebu Table motor power: 37/45 kW Maximum permissible load on the table: 15 tons Cross slide travel speed: 400 mm/min Cross section of the ram: 200 x 200 mm Travel of the ram on the tool holder carriage: 1,000 mm Travel of the carriage to the right of the table axis: 1,070 mm Travel of the carriage to the left of the table axis: approximately 900 mm Equipped with: HEIDENHAIN measuring scales SIEMENS 37/45 kW table motor 12-position tool changer Chip conveyor Tool holder set Supplied with 4 chuck jaws

Condition: repair required (used), Year of construction: 1985, functionality: limited functionality, machine/vehicle number: 11710519, spindle bore: 1,250 mm, spindle motor power: 56,000 W, quill travel distance: 1,000 mm, workpiece weight (max.): 1,600 kg, Equipment: documentation/manual, Basic machine information Machine type: CNC vertical lathe Manufacturer and model: Schiess AG - Schiess Moweg GmbH; Type 12DS100 Schiess Year of manufacture: 1985 Serial number: 11710519 Technical condition: Machine is operational; used, requires repair Technical specifications Working range: Table dimensions - Pallet D=1000 [mm], max. turning height H=800 [mm], max. turning diameter D=1250 [mm] Tailstock stroke S=1000 [mm]; adjustable cross slide - positioning every P=500 [mm] Table load capacity: 1600 kg Control system type: Siemens - Sinumerik 840 D Main drive power - 56 kW; Maximum spindle speed: 500 rpm Axis positioning accuracy: 0.02 [mm] - axis measuring system: optical scales Axis feed rate - "rapid": 6000 mm/min Gbodpfxezvnbxs Aivju Axis feed rate - "working": 0.1 - 2000 mm/min Coolant - yes - through the tool Number of axes: 2-axis lathe Drive type: servo drives Additional equipment Tool magazine: 12 positions Material feeding system: loading station at the pallet magazine Palletizing system - 2-pallet magazine; pallet loading station; machine table - total of 2 pallets Chip transport system - yes Cooling system - control cabinet air conditioning - yes Operating manual - paper version in Polish and German, digital version in German

Condition: new, Year of construction: 2026, CNC Vertical Wheel Lathe for Alloy and Steel Wheel Refurbishment A modern CNC vertical lathe designed specifically for the professional refurbishment of alloy and steel wheels. The machine enables fast and precise restoration of the original factory finish, whether the wheel has suffered mechanical damage, corrosion, or welding repairs. Its vertical design provides the operator with full control over the machining process, while the rigid, heavy-duty base ensures exceptional accuracy even when machining large wheels. It is the ideal solution for tire service centers, wheel refurbishment companies, automotive detailing businesses, and small-batch manufacturing operations. Unlike a conventional universal lathe adapted for wheel machining, this machine has been engineered exclusively for wheel refurbishment. This provides several key advantages: Shorter machining time per wheel Minimal cutting tool wear Superior surface finish without chatter marks or waviness Fast and easy operator training The finished surface matches the original factory diamond-cut appearance, allowing workshops to offer premium refurbishment services while significantly increasing profitability. Key Benefits Suitable for passenger car and light commercial vehicle wheels High-precision reproduction of the original diamond-cut finish Quick workpiece setup and intuitive operation Consistent, repeatable machining results on every wheel Heavy, vibration-resistant machine construction Increased profitability of wheel refurbishment services Technical Specifications Parameter Specification Maximum Turning Diameter 700 mm Maximum Wheel Diameter 660 mm Maximum Chuck Diameter 670 mm Spindle Speed 50–1200 rpm Feed Rate 0.1–1000 mm/min Vertical Travel (Z Axis) 550 mm Horizontal Travel (X Axis) ±330 mm Rapid Traverse (X Axis) 3000 mm/min Rapid Traverse (Z Axis) 3000 mm/min Tool Size 25 × 25 mm Motor Power 4 kW Machine Weight 1200 kg Overall Dimensions 1300 × 1250 × 1960 mm Applications Removal of curb rash, scratches, and surface damage Wheel preparation for painting or polishing Restoration of diamond-cut decorative surfaces Refurbishment of wheels after straightening and welding Machining of new wheels for low-volume production Equipment (Depending on Configuration) Special wheel chuck Gbedezpww Aspfx Aivju Software package with wheel profile optimization Touch probe measurement system Automatic lubrication system 4-position tool turret Operator training and technical support Full CE compliance

Condition: excellent (used), Year of construction: 2019, Vertical CNC lathe – 3 axes Brand: HYUNDAI WIA Type: LV 800 RM Year: 2019 (575 cutting hours) CNC: FANUC 32iB + manual guide Specifications: Turning capabilities: Maximum swing diameter: 890 mm Maximum turning diameter: 800 mm Maximum turning height: 800 mm Horizontal travel: 440 mm Vertical travel: 800 mm C-axis: 360,000 positions 3-jaw hydraulic chuck: Diameter: 530 mm Rotation speed: 2000 rpm Main motor power: 37/30 kW Dimensions (width x depth x height): 2000 x 2877 x 3300 mm Weight: 11 tons Gbsdpfxez Iqlne Aiveu Equipped with: 12-tool turret C-axis 0.001° Rotating tool spindles 7.5 kW, 3000 rpm Through-tool coolant supply 20 bar Renishaw Quickset Rotating tool holders: 3 x axial, 3 x radial Turning tool holders Set of chuck jaws Manual 3-jaw chuck, dia. 630 mm Chip conveyor

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Gbedpjzkbirsfx Aivsu Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Gsdpfx Aez Hmc Tjivebu Swing diameter: 1,000 mm Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: good (used), Year of construction: 2018, Ref. -No.: 10531 Manufacturer: HONOR SEIKI Type: VL - 400CM Year of construction: 2018 Type of control: CNC-Steuerung Control: Siemens SINUMERIK 840D Storage location: Halberstadt Country of origin: Taiwan Machine-No.: 79XXX C-Axis: Yes C-axis speed: 50 - 2250 RPM Turning Height: 2370 mm Table Diameter: 4000 mm Rapid Travel Speed X-Axis: 10 m / min Rapid Travel Speed Z-Axis: 10 m / min Rotate table rotation speed: 1 - 85 RPM Max. Workpiece Weight: 30 kg Max. Turning diameter: 4 mm Distance between faceplate and crossbar support: 820-3320 mm Work feed: mm / min Number of tools in the chain magazine: 24 Crossbar adjustment: 300 x 300 mm Spindle motor drive: AC60/75/100 kW Servo motors (X/Z axes): 5,5 / 5,5 kW Machine length: 9 mm Machine width: 7000 mm Machine Height: 8000/9100 mm Weight Of The Machine Ca.: 115 t Further information: - 2-stage gear change - ATC (Automatic Tool Change) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 Gedpfx Aiszx Nx Djvjbu Machine is still in production and can be inspected by appointment.

Condition: used, Retrofit: 2006 Gjdsvk Tmgopfx Aivobu Faceplate diameter: 6000 mm Turning diameter: 6500 mm Turning height: 4000 mm Support travel vertical: 2000 mm Support travel horizontal: 3250 mm Workpiece weight: approx. 80 tons Machine weight: approx. 220 tons

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Gbsdpfx Aoz N A Avsivou Toolholders, Transformer

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 3,300 mm, turning diameter: 3,300 mm, spindle speed (max.): 92 rpm, spindle speed (min.): 92 rpm, travel distance X-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 60,000 W, rapid traverse Z-axis: 6 m/min, rotational speed (min.): 92 rpm, rotational speed (max.): 92 rpm, total height: 2,330 mm, total width: 6,282 mm, feed length Z-axis: 1,200 mm, workpiece weight (max.): 35,000 kg, overall weight: 50,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC vertical lathe SC 33 CNC MS Year of manufacture: 1995 Condition: used, fully functional Technical specifications: Maximum turning diameter: 3300 mm Maximum workpiece height: 2300 mm CNC control system Condition: functional, live Video available on request. *The machine is in very good condition, fully functional, live and available for inspection and testing. Gedpsyzgtmsfx Aivebu

Year of construction: 2011, condition: ready for operation (used), An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible. Gsdpfxjwtg E Tj Aivebu

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 Gbodpfx Ajz N Ambsiveu ProtoTRAK SLX Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: used, Control: Fagor Faceplate: 5420 mm Turning diameter: 6540 mm Max. turning height: 3500 mm Support (ram) stroke vertical: 1680 mm Support (ram) stroke horizontal: 3250 mm Godpfx Aevzqm Eeivobu Workpiece weight: 60 tons Machine weight: 190 tons approx. Hydrostatic faceplate

Condition: used, Control system: Siemens 3-T Faceplate: 1500 mm Max. turning diameter: 1800 mm Max. turning height: 600 mm X-axis travel: 1995 mm Z-axis travel: 750 mm Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Tool changer: 26 positions Gbedpfxjzl D Rhe Aivou Machine is disassembled. Many tools and spare parts included.

Condition: excellent (used), Year of construction: 2001, Vertical CNC lathe Brand: DAEWOO (DOOSAN) Type: PUMA V550 Year: 2001 (10,000 cutting hours) CNC: FANUC 18i-T Specifications: Turning capabilities: Maximum turning diameter: 800 mm Maximum workpiece diameter: 730 mm Maximum turning height: 750 mm Horizontal travel: 390 mm Vertical travel: 780 mm 3-jaw hydraulic chuck: Diameter: 500 mm Rotation speed: 20 to 2000 rpm Main motor power: 50/37 kW Gedezym Uxopfx Aivjbu Dimensions (width x depth x height) without conveyor: 1,950 x 2720 x 3070 mm Weight: 9 tons Equipped with: 8-tool turret Set of turning tool holders Set of jaws Chip conveyor

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 12,000 kg, spindle motor power: 55,000 W, chuck outer diameter: 2,000 mm, total length: 5,600 mm, total height: 6,000 mm, total width: 6,000 mm, turning height: 1,300 mm, mount diameter: 2,050 mm, overall weight: 31,000 kg, Turning diameter: 2050 mm Table diameter: 2000 mm - 4 independent Morse tapers Gbedpfeznl Rnjx Aivou Maximum workpiece height: 1300 mm Number of rams: 1 Ram stroke: 1000 mm Ram section: 230 x 230 mm Spindle motor power: 55 kW Maximum permissible weight: 12 tons Spindle rotation speed: 0-160 rpm Number of speed ranges: 3 Tool changer: 14 stations Machine footprint: 5,600 mm x 6,000 mm x 6,000 mm (height) Weight: 31,000 kg USED MACHINE

Condition: excellent (used), TECHNICAL SPECIFICATIONS Capacity Diameter of 4-jaw independent chuck: 2,000 mm Maximum turning diameter: 2,200 mm Maximum turning height: 1,200 mm Distance from RAM to table: 0-1,500 mm Cross slide travel: 1,200 mm Speeds (3 ranges): 2-160 rpm Maximum workpiece weight: 12 tons Main motor: 60 kW C-axis with independent motor Godporp Emaofx Aivsbu RIGHT SLIDE Vertical travel: 1,200 mm RAM dimensions: 250x250 mm Motorized tools ISO 50 Tool changer and turret with 20 positions (8 turning turrets and 12 milling tools) Internal coolant for motorized tools and turning tools LEFT SLIDE Vertical travel: 1,200 mm RAM dimensions: 240x230 mm Turning and Grinding Optional grinding head Internal coolant for turning tools Rapid traverse: 8,000 mm/min EQUIPMENT Tool changer and turret with 20 positions, with capacity for 8 turning turrets and 12 milling tools 8 turning turrets included Paper filter NOTES Year of rebuild: 2008 Siemens motors; Simodrive 611 controllers

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Gsdpjzzwgusfx Aivsbu Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Gjdpfxjv R Di Ss Aivebu Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2014, workpiece weight (max.): 25,000 kg, total length: 10,000 mm, total height: 6,000 mm, total width: 10,000 mm, overall weight: 60,000 kg, DÖRRIES SCHARMANN VCE 3000 / 280 CNC Vertikaldrehmaschine Modernisierung: im Rahmen des Retrofits im Jahr 2014 auf Siemens SINUMERIK 840D SLArbeitsbereichTi schdurchmesser: 2.800 mm Max. Umlaufdurchmesser / Drehdurchmesser: 3.000 mm Max. Tischbelastung: 25.000 kg Max. Drehhöhe: ca. 2.100 mm Verfahrweg X-Achse: ±1.550 mm Verfahrweg Z-Achse / RAM-Hub: 1.500 mmHauptantrieb und SpindelnHauptantrieb: Siemens-Hauptmotor Antriebsleistung: 130 kW Max. Spindeldrehzahl: 4.500 min⁻¹ Betriebsart: S6, 40 %Ausstattung: 2 vertikale SpindelnWerkzeugwechsler und Peripherieo    2 automatische Werkzeugwechslero    Kühlschmierstoffanlageo    Späneförderero    Ölnebelabsaugungo    2 separate HydraulikaggregateBetriebsstunden: ca. 12.571 Stunden laut mechanischem Betriebsstundenzähler Table diameter: 2,800 mm Control: Siemens SINUMERIK 840D SL Component weight max.: 25,000 kg Swing: 3,000 mm Rotation height max.: 2,100 mm Gbsdpfxszmkzpe Aivou Weight approx.: 60,000 kg Dimensions (LxWxH) approx.: 10000 x 10000 x 6000 mm Year of construction: 2,014 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2009, turning height: 1,280 mm, total height: 5,600 mm, total width: 3,850 mm, total length: 4,260 mm, rotary table diameter: 1,400 mm, workpiece diameter (max.): 1,600 mm, overall weight: 21,500 kg, CNC Vertical lathe Fremtas - 16FR3 MACH-ID 9467 Make: Fremtas Type: 16FR3 Gbodpfxey Htilo Aivsu Control: FAGOR 8055 TC Year: 2009 Work load 6300 Kg Cross rail adjustment 660 mm Feed rate cross rail 0 - 400 mm/Min Feed rate 0 - 3000 mm/Min Rapid feed 0 - 8000 mm/Min Central lubrication Chip conveyor RAM with Sandvik COROMONT C8 Tooling C8 with double connector Ca 10 units CAPTO Tool system 4 extra heavy duty jaws Max. turning Ø: 1600mm Table Ø: 1400mm Horizontal movement support:1000mm Speeds / ranges: 1 - 200Rpm Power: 75kW Maximum turning height: 1280mm Vertical movement support: 700mm Length: 4260mm Width: 3850mm Height: 5600mm Weight: 21500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Vertical turning lathe with a 2,200 mm table diameter and an approx. 2,500 mm swing diameter. The base machine is from the Chinese manufacturer QQHR (well-known manufacturer). The entire electrical system, including the main motor, servo drives, control cabinet, and PLC, was completely renewed and professionally overhauled by Paulmann (Germany) in 2017. Gbsdpfoycgxkex Aivsu

Condition: not inspected (used), Faceplate: 2500 mm Gbjdpfjzdk A Uox Aivsu Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm

Condition: used, Year of construction: 2005, functionality: fully functional, KIATURN 15N SLANT BED CNC LATHE 170 MM HYD 3 JAW CHUCK MAX TURNING DIA 250 MM BAR CAPACITY 38.1 12 STATION TURRET TAILSTOCK FANUC CONTROL TOOL SETTER PARTS CATCHER Gedpfoz Rnwbsx Aivjbu BARFEED