Used Berkefeld 1993 Berkefeld for sale (227)

Condition: used, Year of construction: 1993, Water softening unit by Berkefeld: Ion exchanger for reducing calcium and magnesium hardness with 2 filter vessels and brine tank, suitable for continuous operation. Nwsdpfsw Uc Ewox Aarok Year of manufacture: 1993 Capacity: 6,000 l/h Machine (add-on): Ion exchanger Capacity: 6,000 l/h Operating overpressure: 10 bar

Condition: defective spare-parts repository (used), Year of construction: 1993, operating hours: 40,042 h, functionality: limited functionality, machine/vehicle number: 1009, turning diameter over cross slide: 345 mm, turning length: 1,000 mm, turning diameter: 550 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 285 mm, travel distance Z-axis: 1,070 mm, spindle motor power: 34 W, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 3,150 rpm, total height: 2,180 mm, total length: 5,755 mm, total width: 2,350 mm, type of input current: AC, overall weight: 7,500 kg, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Manufacturer: TRAUB Type: TND 550 Year of manufacture: 1993 Operating hours: approx. 40,000 hours Condition: defective / not operational For sale is a TRAUB TND 550, manufactured in 1993. The machine was in use at our facility until recently. Currently, the control system does not start, meaning the machine is not operational at this time. We have not investigated the cause of this issue further. Therefore, no statement can be made as to whether the cause lies in the control system itself, the power supply, or another machine component. The following defects were already known prior to the current failure: Gear shifting not functioning. The machine was permanently in gear 2, with a speed range up to approximately 3,200 rpm. Driven tools not functioning. Tailstock operation is performed via an added toggle switch. The turret moves or shifts only in slow motion. The ball screw of the X-axis causes running noises. Nwedjzd Udispfx Aarsk The running noises of the ball screw of the X-axis have been present since we purchased the machine in 2021. Despite these running noises, the machine was able to reliably produce H7 fits until the current failure. The causes of the aforementioned defects, as well as the current failure, have not been fully investigated. The machine is therefore explicitly sold as defective, non-operational, and in need of repair, and is suitable, for example, for repair, as a source of spare parts, or for reconstruction. Inspection is possible by appointment. Sale in the existing "as is" condition. All information is provided to the best of our knowledge, but without warranty. Sale with exclusion of any warranty for the mentioned and possible further, currently unknown, defects.

Condition: good (used), Year of construction: 1993, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,000 rpm, overall weight: 700 kg, For sale is a robust and reliable Altendorf TRK 45ST panel saw from 1993. Machines from the TRK/TKR-45 series are known for their exceptional durability and precision and are still used today in many carpentry shops, joineries, and industrial businesses. The machine features the precision double-roller carriage, typical of Altendorf, which ensures smooth operation and accurate cuts. Thanks to the sturdy steel/cast iron construction, the saw is suitable for both solid wood and sheet materials. Ideal for craft businesses, workshops, or professional interior design. Additional technical data: • Saw blade swivel range: 0–45° • Saw blade adjustment: manual • Speeds: 3,000 / 4,000 / 5,000 / 6,000 rpm • Sliding table/crosscut table: depending on the model, approximately 1,350 mm Nwsdpozwwg Tefx Aarjk • Maximum cutting height: approximately 145 mm at 90° / approximately 100 mm at 45° • Dust extraction connections: Ø 80 mm and Ø 120 mm Normal signs of wear and tear due to age. Due to the age of the machine, it is sold without warranty.

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Nwodsxw Tumjpfx Aarok Year: 2004 Type: EFG EF132 M Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Nedjxl S Uhepfx Aarewk

Condition: used, Year of construction: 1993, Engel ES 80/50 HL (1993) Nodozu R Hzspfx Aarswk

Condition: used, Year of construction: 1993, Overview  This filling monobloc was manufactured in 1993 by the companies PERRIER / GANGLOFF / ZALKIN / CTA. The machine is designed for filling still water and was originally configured for glass bottles and later retrofitted for PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. In 2006, an air filtration system (CTA DA001) was added. The CIP system is integrated. Technical data  - Capacity: approx. 6,000 bph (1.5 L) - Formats: 0.5 L / 1.5 L - Application: Filling of still water (PET bottles) - Configuration: 16 rinsing heads / 20 filling valves (atmospheric) / 6 capping heads - Neck finish: 30/25 Njdpfxey Etd Te Aarowk - Incl. Cap feeder, Air filtration system, CIP system

Condition: used, Year of construction: 1993, Overview  This shrink packer was manufactured in 1993 by France POLYPACK INDUSTRIES. The machine is designed for shrink wrapping of PET bottles using neutral film with sealing bar. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  Nsdoy Etqmspfx Aarewk - Capacity: approx. 20 ppm - Formats: - 1.5 L – 3×2 - 2.0 L – 3×2 - Application: Shrink packaging of PET bottles - Configuration: Shrink packer with sealing bar (film only)

Condition: used, Year of construction: 1993, Overview  Nsdpfxsy Hmtwo Aarjwk This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data - Capacity: approx. 7,200 bph - Formats: 1.5 L / 2.0 L - Application: PET - Configuration: Hotmelt labelling machine for precut paper labels

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system Nodpfxoyb Sxae Aarjwk - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: like new (used), Kaltenbach TL 350, manufactured in 1993, but used very rarely! Aluminum circular saw with manual feed and manual vertical clamping device. Nedpozww A Ujfx Aarewk According to Kaltenbach documentation, the technical specifications of the TL 350 are: Saw blade: Ø 350 mm Motor power: 2.0 kW Cutting speed: 3,200 m/min Cutting range 90°: round 115 mm, square 100 mm, flat 250 × 40 mm Cutting range 45°: round 115 mm, square 100 mm, flat 190 × 40 mm Mitre angle: −45° to +30° Weight: approx. 68 kg Dimensions: approx. 450 × 840 × 750 mm Working height with base: approx. 1,008 mm A new saw blade is included!

Year of construction: 1993, condition: used, Max. sawing length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Nwsdpsvdp Rzofx Aarok Moving roller conveyor material support Minimum quantity spray device

Condition: used, Year of construction: 1993, Overview  Nedpoyb Srgefx Aarewk This decrater was manufactured in 1993 by the German company Otto Fleischer. The Rota/1/A model is a single-head unpacking machine. It is still installed and immediately available. Technical data  - Bottle formats processed: 0.7L (GDB) and others  - one-head operation - 90° infeed-outfeed design - Operating pressure: approx. 6 bar - Power supply: 380 V / 50 Hz / N / PE - Connected load: approx. 4 kW - Control voltage: 24 V

Condition: used, Year of construction: 1993, Max. punching force: 1000 kN Throat: 510 mm Large support table with material stops on the punching side Electrical contact length stop for the shearing side Hydraulic hold-down device for profile and flat steel shears Cuts 500 x 20 mm on the flat steel shear Holes e.g. 40 mm diameter in 22 mm flat iron Nwodpsf Nwn Aofx Aarok Assortment of tools is included in the price Weight: 5,000 kg

Condition: used, Year of construction: 1993, Overview  The following 6 component mixer was built in 1993 by the German manufacturer Famix. The mixer can be offered completely overhauled and with warranty. The machine is available immediately in its current condition.  Technical details  - Capacity: max. 30,000 l/h beverage   - 6-component mixer  Nedpfx Asvcp U Rjarswk - Dimensions (LxWxH): 3,200mm x 1750mm x 2800mm   - Flow meter  - Dosing pump  - Vacuum degassing  - Brix measurement  - CO2 measurement  - CO2 pressure control  - Conductivity measurement   - Electrical data  - Operating voltage 400V/230 V 50 Hz  - Control voltage 42V AC 

Condition: good (used), Manufacturer: Zoller Type: V420 / 606 Year of manufacture: 1993 Njdpfozwxq Tox Aarjwk Control system: Zoller 6051 Mount: SK40 Measuring range, X-axis: 1,500 (300) mm Measuring range, Z-axis: 450 mm Magnification: 20x Fine adjustment: +/- 5 mm Projection area: 80 mm Air pressure: 6 bar Weight: approx. 150 kg Dimensions: 1,400 x 800 x 1,300 mm

Condition: defective spare-parts repository (used), Year of construction: 1993, machine/vehicle number: 208712, functionality: not functional, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, Folding press EHT EHPS 15-35 150 t | 3,550 mm | Year of manufacture 1993 | Cybelec DNC 880 | incl. tool package For sale is a robust hydraulic EHT folding press, type EHPS 15-35, manufactured in 1993. The folding press has a working length of 3,550 mm and a pressing force of 1,500 kN or approximately 150 t. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive package of upper and lower tools as well as special tools. Nodpfxjzd Sc Ae Aarswk Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot be performed at the moment. The error needs to be bypassed or professionally repaired. After this error has been resolved, the machine should be operational again. Therefore, it is being sold explicitly as a used, repair-required industrial machine for restoration. The machine is in used condition, commensurate with its age. Signs of use, paint damage, and dirt are present; see pictures. Technical data: • Manufacturer: EHT Werkzeugmaschinen GmbH • Model / Type: EHPS 15-35 • Machine number: 208712 • Year of manufacture: 1993 • Pressing force: 1,500 kN / approx. 150 t • Working length: 3,550 mm • Control system: Cybelec DNC 880 • Oil quantity: 390 l • Power supply: 3~ • Frequency: 50 Hz • Operating voltage: 380 V • Control voltage: 220 / 24 V • Rated current: 50 A • Main fuse: 80 A • Electrical wiring diagram no.: 111002 Safety system: • System: Press safety system Starkstrom Gummersbach • Delay time: 66 ms • Delay distance: 9 mm • Safety distance: 105 mm Inspection / Collection: The machine is located in an industrial hall and can be inspected by appointment. Dismantling, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be offered if required. Sales note: No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been compiled to the best of our knowledge based on the nameplates and available information.

Condition: refurbished (used), Year of construction: 1993, machine/vehicle number: 20658, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 4,800 mm, table height: 980 mm, throat depth: 305 mm, ram plate length: 4,500 mm, distance table to ram: 500 mm, clearance between the columns: 3,760 mm, oil tank capacity: 350 l, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, overall weight: 22,500 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance Njdpezktg Aofx Aarswk • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Year of construction: 1993, condition: used, The REGA 6 indexer notches and prints directories onto pocket diaries, small books, or stapled/glued booklets. The machine is equipped with four processing stations and two magazines. The books are transferred from the input magazine to the processing stations and to the unloading magazine using an advancement system. Books to be notched must be manually stacked in the feed magazine. At the first processing station, a counting device and an opening finger open the book at the correct place. The index is notched in the second processing station, where each sheet is taken separately, placed on the blade, and notched. The third and fourth stations are intended for printing the directories. The use of two printing devices allows for two-color printing. Then, the book is closed and advanced to the unloading magazine to be stacked. The transport, opening, notching, printing, and stacking all occur automatically. The notched and printed books are manually unloaded from the stacking magazine. Equipped with: Infeed station Opening station Index cutting /notching station Printing station 1 Printing station 2 Delivery Various printing units/knifes etc, see pictures. Technical details: Book formats: Height: 70 - 170 mm Width: 70 - 115 mm Thickness: 1 - 15 mm Nwedoxdxnfspfx Aarjk Paper weight: Content: 30 - 120 g/m² Cover sheet: up to 180 g/m² Tabs Number: 1 - 40 (per book) Tab width: 15 mm Tab positions: Individually programmable, up to 40 positions Number of sheets per tab 1 - 35 sheets/tab Individually programmable for each tab Notching performance Number of notches per second: 2 - 7 tabs

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 0013, type of input current: three-phase, input voltage: 380 V, working height: 1,000 mm, total width: 885 mm, total length: 930 mm, total height: 1,630 mm, overall weight: 545 kg, insertion depth: 380 mm, Huen Chen HC-13TR4E Quadruple Automatic Riveting/Eyeleting Machine Heavy-duty automatic quadruple eyeleting machine, designed for the production of lever arch files and binders. The machine sets four eyelets/rivets simultaneously in one working cycle. The material is positioned manually against the adjustable guides. Operation is activated by two microswitches on the working table, so no foot pedal is required. Pre-punching of the material is not necessary. The machine punches and sets the eyelets in one operation. Technical details: * Manufacturer: Huen Chen Enterprise Co. Ltd., Taiwan * Model: HC-13TR4E * Year: 1993 * Quadruple eyeleting/riveting system * Fixed spindle / eyelet spacing * Throat depth: 380 mm * Working height: approx. 1,000 mm * Motor: 1 HP * Power supply: 380 V, 3-phase, 50 Hz Nwedpox Nfhlofx Aarek * Machine dimensions: approx. 930 × 885 × 1,630 mm * Net weight: approx. 545 kg * Intermittent motor operation * Two-microswitch workpiece activation The machine is complete with the installed tooling and a quantity of matching eyelets/rivets as shown in the photographs. The machine is in good used and fully functional condition and can be inspected while running at our warehouse in Son en Breugel, the Netherlands. IMPORTANTLY; this model is still part of Huen Chen's current product lineup!

Condition: excellent (used), Year of construction: 1993, OMAG TRONIC 140/120, complete line, production pallet size 1450-1100, twin-feed machine, year of manufacture 1993, racking trolley with rotation, repacking including strapping, 7 mould sets, Siemens S5 control system. Nodpfx Aaexmk Uvsrewk

Condition: excellent (used), Year of construction: 1993, Enorm edge sanding machine (now Kündig) In very good condition. Type: LBK 160 Year of manufacture: 1993 With veneer edge sanding attachment Oscillation can be switched on. Electric height adjustment of the sanding unit Table can be tilted up to 45 degrees Sanding belt width 150 mm Sanding belt length 2600 mm 3 kW motor 2 additional motors for height adjustment and oscillation With feed system Njdpfozbyt Esx Aarewk Weight approx. 400 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 Nedpezdwtysfx Aarjwk * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective

Condition: used, Year of construction: 1993, Edge bander Manufacturer: Bi-Matic Type: BSC 222.5 Year of manufacture: 1993 Edge thickness: 0.4 - 3/8 mm Workpiece thickness: 10 - 60 mm Nwsdpfx Aszudfqjarsk Feed rate: 8 / 12 m/min Cut-off saw unit: Yes Flush trimming unit: Yes - The machine needs to be re-adjusted and/or serviced.

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Nsdpfx Aasy Ahr Hjrjwk Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Weight approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.