Used Vecchiato Sn 2000/120 for sale (19,365)

Year of construction: 2026, condition: new, The 2000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304 stainless steel. - Capacity: 2000L - Motor: 7.5kW, 3-phase, 50Hz - Machine weight: 850kg - Dimensions: (L 2880 x W 1200 x H 2200mm) -we offer mixers from 200L to 3500L The mixer's interior and ribbon itself are polished to a high gloss, significantly simplifying and accelerating mixing, as well as facilitating cleaning after use. These mixers are used for mixing bulk, liquid, or semi-liquid materials. Cedpfx Aaey Ew Tfsxord Primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: ready for operation (used), * Brand: GFA * Model: vibrating chute * Dim.: length 2000 mm - width 1200 mm * with: two pieces vibration motors of each 2,3 kW * Incl.: springs Codoywmi Hspfx Aaxord * Stock: 2 pieces.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Crsdpfswugczox Aaxjd Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 2000mm -Width: 1200mm -Groove width: 14 mm -Total dimensions: 2000/1200/H230 mm Crsdpfx Aaot Uwx Roxjd -Weight: 1985 kg

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module, voltage limiting module, voltage protection module -Manufacturer: Siemens, Simodrive Active Line Module VPM 120 from vertical lathe Scherer VDZ 80 DS -Type: 6SN1113-1AA00-1JA1 -Input: 3AC 430-480V -Dimensions: 600/300/H170 mm -Weight: 10.7 kg Crjdpevuxxpefx Aaxed

Condition: used, functionality: fully functional, load capacity per storage section: 10,000 kg, total width: 1,100 mm, load per truss pair (max.): 2,100 kg, frame height: 12,000 mm, clear span: 2,700 mm, product height (max.): 2 mm, Large Lot of Nedcon NR Pallet Racking, 12,000mm High (USED) · 1610x Frame Nedcon NR, Type 1006720, height options from 2,000 to 12,000mm, depths available in the following sizes: 900/1067/1080/1100x100mm, blue (section load max approx. 15,000kg, depending on beam heights). Frames are supplied in separate components. Both height and depth are variable! · 1400x Beam Nedcon NR, Type CC1004015, 2650x100x40mm, orange (2,150kg) · 16,960x Beam Nedcon NR, Type CC1004015, 2700x100x40mm, orange (2,100kg) Crodpfswhi Rzex Aaxsd · 390x Beam Nedcon NR, Type CC1104015, 2700x110x40mm, orange (2,350kg) Heights up to 12 meters and any depth are available. Pricing on request, depending on frame depth and required quantities. We also have a wide range of new and used Nedcon materials and accessories in stock! All prices exclude VAT. Payment: Due upon delivery. Ex warehouse Zutphen. Transport can be arranged if required. Used materials available while stocks last. Bastell Magazijninrichting BV Gerritsenweg 6 7202 BP Zutphen The Netherlands

Condition: ready for operation (used), functionality: fully functional, power: 7.35 kW (9.99 HP), 2-speed (Vario) feed gearbox Codpoyzc Efefx Aaxord 4-spindle thickness table guide Electric thickness table adjustment

Condition: excellent (used), Year of construction: 2006, 70 linear meters of SSI Schäfer Palflex pallet racking, including shelf inserts. Used, in good condition, see pictures. Year of manufacture: 2006 Height: 4 m Credpfx Aokx E I Njaxed Depth: 120 cm Field load: 12,000 kg Frame: galvanized Beams: red Shelf inserts included! 2 inserts per 2.7-meter beam length. Negotiable price: €8,290 net, ex warehouse. The offer includes: + 26 pre-assembled frames, depth 120 cm, height approx. 4 m + 100 beams, length 2.7 m, 1500 kg load capacity per bay with evenly distributed load + 200 safety locks + 100 galvanized shelf inserts for 50 levels, each 2.7 meters long + 104 concrete anchors + Load capacity signs Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes and errors in the technical data, specifications, and prices, as well as prior sale! See our general terms and conditions; all prices excl. VAT, ex warehouse.) We buy/sell: We are constantly looking for and offering numerous items from various areas: - Complete business closures - Business liquidations - Quick, flexible, and efficient! - We also clear and/or dispose of goods for insolvency administrators. Send us some keywords, and we will get back to you promptly. To visit our website, please click on our logo!

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data - Capacity: up to approx. 15,000 bph Cedpfoy Azv Ssx Aaxsrd - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Codpfjy Azu Ujx Aaxsrd Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: good (used), Year of construction: 2007, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, Manufacturer: Lagun Goratu Type: GBM CM5 Control system: HeidenHain iTNC530 Year of construction: 2007 Specifications: Metric Metric US Standard X-axis 5000 mm Y-axis 1200 mm Z-axis 2000 mm Table length 6500 mm table width 1100 mm Table load 6000 Spindle power 37 kW Spindle speed 4000 rpm Tool holder 50 ISO/Bt/Mk Feed X - axis 20000 mm/min. Feed Y - axis 20000 mm/min. Feed Z-axis 20000 mm/min. Milling head auto index 2.5 x 2.5 ° Working hours 18000 H Crsdpfx Aasvd Ddcsxod Dimensions (estimate) length 8400 mm width 6800 mm height 4800 mm weight 34000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 2001, IRB2400/16 Weight 900 kg, 2x pallete fully funtional 9900 mth cables, Csdpfx Aexq Aaxeaxord teachpendant Payload 16 kg Reach: 2,4 m

Condition: used, Year of construction: 2001, IRB 2400/15 Weight 900 kg, 2x pallete 5600 mth Cedpsxq Actofx Aaxsrd The robot should be functional, everything has started, but the panel cannot be connected to it. No cables, No teachpendant Payload 16 kg Reach: 2,4 m

Condition: as good as new (ex-display), Year of construction: 2016, operating hours: 10 h, functionality: fully functional, type of input current: AC, volume flow: 12,000 m³/h, total width: 3,000 mm, total length: 3,700 mm, total height: 3,650 mm, overall weight: 5,600 kg, operating pressure: 16 bar, pressure dew point: 2 °C, ambient temperature (max.): 45 °C, ambient temperature (min.): 2 °C, type of cooling: water, A compressed air refrigeration dryer consisting of 2 DFLO 1200 W units. The dryer has only been operated for a few hours on a test bench. Afterwards, it was repacked in its original packaging and stored in dry conditions. Volume flow rate: 12,000 m³/hour Min. / max. operating pressure: 2 - 16 bar Test bench operating pressure during last application: 1.4 to 2.3 bar Inlet diameter: 1x DN 200 Outlet diameter: 1x DN 200 The dryer features a second overpressure outlet DN 100 with Samson pressure regulator. Min. / max. compressed air temperature: +2°C to +55°C Min. / max. ambient temperature: +2°C to +45°C Cooling water requirement: 14.3 m³/h Cooling water connection: 2" Refrigerant: R407C Refrigerant charge: 24 kg Crodpfsw Dppvjx Aaxod Installed electrical power: 29 kW Power consumption: 18 kW Wooden crate dimensions: Length: 3700 mm Width: 3000 mm Height: 3650 mm Weight: 5600 kg

Condition: good (used), total length: 2,000 mm, total width: 1,200 mm, Size: 2000x1200x200mm Hole size: 1300x500mm Csdpour N Sdofx Aaxjrd

Condition: good (used), Regal Trepko rotary pot filler and sealer. Was previously used in a UK factory packing dairy products like yoghurts, cream, sauces etc. Crsdopgqtzopfx Aaxed

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 +Controller +TPU DEMO ROBOT as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Codpfx Asxq Tu Tjaxsrd

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) Csdpezhidrofx Aaxjrd WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Ph1 / 0.3 phase slider Dust cover

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical data Year of manufacture: 2007 Clamping unit Clamping force: 1300 t Max. opening stroke/mounting height: 2300 mm Max. distance between platens: 4000 mm Min./max. mould height: 1000 - 1700 mm Max. platen height: 1910 mm Min. mould size: 1000 - 1700 mm Clear tie bar spacing: 1500 mm Nozzle radius: R40 mm Mould weight: 29000 kg Ejector stroke: 350 mm Injection unit Screw diameter: 135 mm Stroke volume: 8588 ccm Core pulls AWS/DS: 1/1 Needle shut-off pneumatics: 1 Csdpfxozgv Uue Aaxjrd The machine is supplied with a Kuka robot and can be inspected in operation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, BAZ and extrusion die system for manufacturing car sill components, consisting of: *Machining equipment: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2 coolant treatment units *Assembly of subassemblies (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for Robot 1 - Marking station Crodpfx Aaozi Efusxsd - Robot 2 KUKA KR120 R3500 - Gripper for Robot 2 - Interface between robot and machining center - Cleaning unit for components - Assembly machine with 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for Robot 5 - Pallet station - Safety enclosure - Electrical control and integration Further information available upon request.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: snr: 1015, number of cylinders: 2, drive type: Servo Siemens, number of previous owners: 1, input voltage: 400 V, input frequency: 50 Hz, number of print heads: 1, air pressure: 6 bar, control voltage: 24 V, nominal power (apparent): 15 kVA, sieve area: 260,000 mm², sieve perforation: 10 mm, space requirement height: 3,500 mm, space requirement length: 8,000 mm, space requirement width: 2,000 mm, year of last overhaul: 2025, control type: PLC-controlled, number of digital displays: 1, production capacity: 9,000 unit/h, Equipment: CE marking, cooling unit, emergency stop, type plate available, Fully functional sachet machine for solids, recently taken out of production due to a change to a different packaging format. The machine produces four-sided sealed sachets from paper-foil with a PE layer. Standard sachet size: 70 x 150 mm external dimensions, with a usable internal volume of approximately 25 to 30 ml. The hanging hole with tear-off feature, in the reinforced top part, can be disabled if desired. The machine includes, among other things: * Automatic film tension and film alignment system; * Videojet inkjet printer, Meler hotmelt unit; Cooling unit, chip extraction system; * Siemens control and servo, Festo pneumatics; * Reinforced hanging edge through multilayered film fold and hotmelt adhesive; * Integrated punching functions for hanging hole, tear-off feature, and alignment mark (can be disabled); * Carousel system for opening, inspection, dosing, sealing, and ejection; * Automatic box selector; * Vibrating screen, infeed conveyor, hopper, and volumetric dosing system. The machine has always been well maintained and recently underwent an overhaul in which both the servomotor and the associated drive were replaced. Annual maintenance was consistently performed. The machine can be demonstrated in working order. Includes cabinet with spare parts, printed Dutch and German manuals, parts drawings, electrical diagram, and documentation on CD. Crodezgv Dvspfx Aaxed Terms of sale: The machine is sold EXW (Incoterms® 2020) at the seller's location. Dismantling, internal transport, loading, transport, unloading, and reinstallation are entirely at the buyer's expense, risk, and responsibility. Technical support during dismantling and internal transport can be provided, but it is purely advisory and does not imply any liability on the part of the seller. Additional information or a demonstration can be provided upon request.

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, overall weight: 320 kg, fuel type: diesel, tank capacity: 30 l, color: green, output current: 39 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 9.9 kW (13.46 HP), nominal power (apparent): 13 kVA, continuous power: 10 kW (13.60 HP), continuous power (apparent): 11 kVA, total length: 1,360 mm, total width: 650 mm, total height: 980 mm, rotational speed (max.): 3,000 rpm, motor manufacturer: China, type of cooling: water, Energy Generator T1200FULL Dealer of ENERGY Power for life The Energy 13.2 kVA Generator T12000FULL diesel generator is available for sale at Van Delft Staal / Aggregaat.store, designed to provide a stable power supply during any power outage. The T12000FULL is equipped with AVR technology (Automatic Voltage Regulation), ensuring the voltage remains constant at all times, making it ideal for connecting sensitive equipment. An optional ATS (Automatic Transfer Switch) is also available for off-grid systems and automatic switching during power outages. This diesel generator operates quietly, efficiently, and is built for long-term reliability, exactly what you would expect from Van Delft Staal/Aggregaat.store. Key advantages: Power: 13.2 kVA / 10.6 kW Power: 9.9 kVA / 7.9 kW Sockets: 230V-16A and 400V-32A Crodpfx Aey S Tq Teaxod 3000 rpm AVR system for stable voltage Predisposition for ATS: Prepared for ATS (Automatic Transfer Switch). This means the unit is already wired or equipped with the necessary connections to install an external switch. Quiet, fuel-efficient, and easy to maintain Perfect as a generator during power outages. We ensure all generators are ready to start and operate. In stock.

Year of construction: 2004, condition: good (used), Spritzgiessmaschine bis 5.000 KN Machine type: Krauss Maffei KM 2300-12000 MC Year: 2004 Control: CNC MC4 Working hours: 93.900 h SPECIFICATIONS Closing unit Closing force: 23,000 kN Maximum tool opening force: 1,420 kN Thrust force of the movable plate (opening): 227 kN Clamping force of the movable platen (closing): 203 kN Tool clamping area (H x W): 2,830 mm x 2,400 mm Stand spacing (H x W): 2,000 mm x 1,600 mm Tool opening stroke: 2,600 mm Min. tool height: 1,100 mm Maximum tool height: 1,800 mm Maximum tool spacing: 3,700 mm Hydraulic ejection stroke: 350 mm Ejector force (forward/reverse): 415/115 kN Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1,389 bar Displacement: 8,588 cc Projectile weight (PS): 7,815 g Injection capacity: 1,019 cc/s Screw speed: 113 rpm Maximum plasticizing capacity: 191 g/s Nozzle pressure: 241 kN Electrical and hydraulic equipment Rated power of the pump motor: 132 kW Installed heating capacity: 997 kW Adjustable cylinder heating zones: 7 Number of drying cycles: 350 per hour Tank capacity: 2,500 L Dimensions and Weight Machine dimensions: 15.15 m x 4.15 m x 3.29 m Total weight of the machine: 143,000 kg Maximum mold weight: 62,000 kg Crodpfozi Sfzox Aaxod LRX 1000 Robot X-Axis: 2.000 mm Y-Axis: 3.000 mm Z-Axis: 5.000 mm

Condition: used, mileage: 478,000 km, first registration: 04/2005, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, driver cabin: day cab, gearing type: semi-automatic, emission class: euro3, suspension: steel, Year of construction: 2005, Equipment: crane, Palfinger PK12000 – 1 x Hydraulic system – Rotor – Grab – Tipper 5.30 m – Hub reduction – EPS 3 pedals – Total weight 19,000 kg – Unladen weight 11,620 kg – = Further information = Technical information Engine displacement: 11,946 cc Axle configuration Suspension: Leaf spring suspension Front axle: Steered Rear axle: Reduction: External planetary axles Weights Crodpfx Aszfaxzjaxsd Unladen weight: 11,620 kg Payload: 7,380 kg GVWR: 19,000 kg Functional Crane: Palfinger PK12000, behind the cab Pump: Yes Identification Reference number: 64 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2003, 1 used steam boiler ----- - mounted on a frame - integrated economizer Manufacturer: LOOS Type: UL-S Heating surface approx.: 240 m² Output: 12,000 kg/h Maximum permissible operating pressure: 10 bar Water content at nominal water level approx.: 14.40 m³ Codpfx Ajzcvkceaxjrd Year of manufacture: 2003 CE marking: CE0036 equipped with Saacke combination burner for oil and gas, economizer, feed water pump, control cabinet, and the existing coarse and fine fittings.