Used Variovac 2015 Variovac Primus Thermoformer for sale (1,729)

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 Hedpfext Rddsx Ad Ren - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: used, 10 ton loading bridge Bj 2015 L x W 12 x Immediately available Hedpfoxb Razox Ad Rsn We can also organize your transport

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 YEAR OF MANUFACTURE: 2002 SERIAL NUMBER: 02 2406 TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle Hsdeyin Ugjpfx Ad Ren AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.

Condition: used, Year of construction: 2015, - Brand: Snorkel - Type: A38E - Year of construction: 2015 - Weight: 3770 kg. Hedpfxsxqrp Ns Ad Ron - Hours: 1595 - Working height: 13.5 meters - Side reach: 6.1 meters - Drive: Battery 48 Volt - Built-in battery charger (220 volts) - Non-marking tires - New safety inspection possible - Aerial work platform book available - CE document available - From 1st owner - Video on our website - Trade-in and transport possible * Weight: 3770 kg. * Brand: Snorkel *Type: A38E * Working height: 13.5 meters * Construction year: 2015 * Hours: 1595 * Lateral range: 6.1 meters * Drive: Battery 48 Volt

Condition: used, Year of construction: 2015, - Brand: Haulotte - Type : H16TPX - Year of construction: 2015 - Weight: 6800 kg. - Hours : 2442 hours - Drive: 4x4 - Working height: 16 meters - Lateral reach: 12.5 meters - Lifting capacity: 230 kg. - Jib arm - Rotatable work tray - Safety inspection until 20 Aerial work platform book available - CE document available - Video on our website Hedpfx Adowx Rits Ren - Trade-in and transport possible * Brand: Haulotte *Type: H16TPX * Construction year: 2015 * Weight: 6800 kg. * Hours: 2442 hours * Drive: 4x4 * Working height: 16 meters * Lateral reach: 12.5 meters * Lifting capacity: 230 kg.

Condition: used, Year of construction: 2015, POPP Banding Machine The POPP Banding Machine is a powerful and precise device for bundling and packaging printed materials, paper goods, and other products using paper or film bands. It is ideally suited for use in printing houses, the graphic industry, as well as in logistics and packaging technology. The machine impresses with its robust construction, high flexibility, and easy operation. Special Features - Robust, industrial design for continuous operation - Flexible processing of various product sizes - Stepless speed control directly on the control panel - Product access optionally straight or transverse to the band running direction - Lockable foot stoppers for secure positioning - High performance: up to 600 stacks per hour - Easy integration into existing production lines - Suitable for various banding materials (paper, film) - Compact design for space-saving use Technical Specifications - Working width: 305 mm - Console width: 760 mm - Working height: 740 mm (lockable) - Product format (min.): 150 x 100 x 30 mm (L x W x stack height) - Product format (max.): 400 x 290 x 50 mm (L x W x stack height) - Maximum stacks/hour: 600 - Speed: 10 – 30 m/min - Speed control: 0 – 100% on the control panel - Machine dimensions (net): 1500 x 800 x 1700 mm (L x W x H) - Machine weight: 500 kg - Power supply: 400 V, 16 A, 3 phases, 50 Hz All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Hodpfx Adow Evcre Rsn Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2001, Greiner Thermorunner 4 for polypropylene (PP) and polystyrene (PS). Including heating station, forming station and cooling system. * Punching force: 180000N Hsdpsn Utzfsfx Ad Rjn * Production speed: max. 45 cycl/min * Sheet width min: 150 mm * Sheet width max: 560 mm * Sheet thickness min: 0.3 mm * Sheet thickness max: 2.5 mm This Thermoforming Line is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Hjdpfx Adowa Dz Eo Ron Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: good (used), Year of construction: 1990, operating hours: 45,350 h, machine/vehicle number: 1537, Hybrid machine for sheet or coil thermoforming. Equipped with a BE-type plate feeder without preheating. Equipped with a PR-type coil unwinder. Hodpfetv Ivzsx Ad Ron Equipped with an upper and lower table. Managed by a Schleicher PDPF order manager. Quick clamping of reduction frames and tooling maximum width 700 mm maximum plate size 1000x700 maximum sheet thickness 10 mm We take care of dismantling and loading onto your truck, which is available for collection.

Condition: good (used), Year of construction: 1990, operating hours: 11,000 h, functionality: fully functional, machine/vehicle number: 1531, film width: 700 mm, type of input current: AC, total width: 700 mm, total length: 3,500 mm, total height: 3,500 mm, input voltage: 400 V, power of vacuum pump: 3,000 W, compressed air connection: 6 bar, working width: 700 mm, pump capacity: 100 l/min, mold height (min.): 300 mm, control cabinet width: 1,000 mm, operating temperature: 650 °C, Thermoforming machine UA 100 1 g year 1990 in good working order. Maximum sheet size: 1000x700x10 Upper heating 3 pilot emitters , lower heating 1 pilot emitter Motorized counter-mould height adjustment Quick clamping of upper and lower frame Quick clamping of tooling on lower table Quick clamping of tooling on upper table Lower film sag control Bubbling with photoelectric cell Hjdpfx Adet Irace Rsn Memorizable bubbling and demolding intensity → cascaded pneumatic valves BUSCH 100 m/cube vacuum pump Machine stopped and stored following its replacement by a new ILLIG UA 4 g automatic machine Price of machine dismantled and loaded on your truck Possibility of putting it back into service if you wish to come and see it

Condition: excellent (used), Year of construction: 2015, Engel VIPER 20 (2015) X axis demolding stroke - 700 mm Y axis traverse stroke - 1500 mm Z axis traverse stroke - 2360 mm X axis reach from fixed platen - 925 mm C axis pneumatic swivel axis - yes Hedsxy Rarspfx Ad Rjn Nominal payload - 25 kg IMM clamping force - 55-340 US tons

Condition: excellent (used), Year of construction: 2015, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 270 mm Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Hsdpfx Adeyv Eyhe Ron Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA Working hours: 5.744h

Condition: used, mileage: 551,759 km, power: 315 kW (428.28 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Special Equipment: Axle load measuring system, audio system: CD radio (Bluetooth), air horn, cab width: 2.50 m, suspension: front springs 7.5 t, 2-leaf, tinted windscreen, information display 10.4 cm with additional indicator, integral rear end, comfort upper bunk, narrow, fuel tank: 390 L aluminum, fuel tank: combination tank aluminum - 820 L diesel + 90 L urea solution (AdBlue), air intake behind cab, roof and side air deflectors (lockable), spare wheel, retarder, acoustic reversing warning (external warning signal), cab seats: comfort driver's air suspension seat, external sun visor, additional 24V socket in passenger footwell, Fleetboard preparation Additional Features: -EURO 6 emissions standard, axle configuration: 4x2, front axle load 7.5 t, Actros 4, trailer socket 24V / 15-pin, work lights, exhaust outlet to right side, electric & heated exterior mirrors, rear axle differential lock, steel air reservoir, medium compressed air unit, cab: L StreamSpace, cab: steel-sprung, comfort, suspension: leaf / air, suspension: aluminum front spring bracket, electric windows, alternator 100 A, 12-speed transmission - type: G 211-12, rear axle crown wheel 440, body/build: tractor unit, lower comfort bunk, central locking system, communication interface, 3-piece mudguard, radiator grille, regulated power steering pump, 2-stage air compressor, engine 10.7 L - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, ramp mirror, residual heat utilization, disc brakes on front and rear axles, seat cover/upholstery: fabric, cab seats: functional passenger seat, cab seats: foldable driver's seat backrest, voltage converter 24V / 12V 10A, front splash guards, front axle stabilizer, external left storage flap, cab 24V socket, tachograph / EC control device, cab door extension, aerodynamic underbody cladding, front underrun protection, CB radio preparation, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 18.00 t, additional water heater, parking heater Hedpfxjmiggko Ad Ron * VIN: WDB9634031L930383 * Parking heater * Parking air conditioning * Retarder * First registration: 20.05.2015 * Net price * All information without guarantee Tel./WhatsApp:

Condition: used, mileage: 620,000 km, power: 330 kW (448.67 HP), first registration: 09/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, emission class: euro6, Equipment: ABS, electronic stability program (ESP), had accident, parking heater, Special equipment: • Audio system: CD radio (Bluetooth) • Battery: 220 Ah • Air horns (2) on cab roof • 12-speed transmission - Type: G 230-12 • Rear axle crown wheel 300 • Integrated rear • Communication interface • Alloy rims 9.00x22.5 (ALCOA matt) • Air intake behind cab • Reinforced engine brake • PTO MB 131-2c • Frame lowering with residual airbag pressure control • Retarder • Rotating beacon left/right • Low-maintenance fifth wheel • Cabin seats: Driver’s air suspension comfort seat • Exterior sun visor • Voltage converter 24V/12V 10A • Additional 24V socket in front passenger footwell • Preparation/switch for lift axle on trailer/semitrailer • Auxiliary heater (water) • Transmission oil cooler Further equipment: • Emission standard EURO 6 • ABS switchable • Axle configuration: 4x4 • Front axle load: 7.5 t • Trailer socket 24V / 15-pin • Work lights • Model: Arocs • Exhaust tailpipe to vehicle center • Exterior mirrors electrically adjustable and heated • Rear axle differential lock • Compressed air connection in cab • Steel air reservoir • Medium-size pneumatic unit • Cabin width: 2.30 m • Movable cab access • Hydraulic cab tipping system • Cab type: L ClassicSpace • Cab floor with engine tunnel 170 mm • Suspension: leaf/air • Front suspension: leaf springs 7.5 t, 3-leaf • Electric window lifters • Tinted windscreen • 100A alternator • 12-speed transmission - Type: G 281-12 • AdBlue (urea) tank: 60 Ltr. • Manual tilting roof (steel) • Hydraulic Auxiliary Drive (HAD) • Info display 10.4 cm • Interior filter: pollen filter • Body/type: tractor unit • Body variant: standard • Comfort bunk below • 3-part mudguards • Fuel tank: 290 L steel, left • Non-regulating steering auxiliary pump • Front air intake • 2-stage air compressor • Heated air dryer • Engine: 12.8L - 330 kW R6 diesel (OM 471) • Engine compartment encapsulation • Wheelbase: 3600 mm • Ramp mirror • Residual heat utilization Hedpfx Asuh Nfbsd Ron • Disc brakes with partial cover • Front & rear disc brakes • Seat cover/upholstery: fabric • Cabin passenger function seat • Front axle stabilizer • Cab socket 24V • Tachograph / EC control device • Pre-installed CB radio wiring • Pre-installed toll collection wiring • Straight front axle • Permissible total weight: 18.00 t * Retarder * 4x4 Hydrodrive * Accident vehicle * Engine, transmission and frame OK * Water cooler OK * Starter OK and rolls * Price net * All information without guarantee Tel./WhatsApp:

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm Hedpfx Aev Tyzcsd Ren >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Year of construction: 1996, condition: excellent (used), Thermoformer Brand Multivac Model R 530 Machine number: 837 Year of construction: 1996 Power 15 kW Voltage 415 V, 3 Ph, 50 Hz, 35 A Film width: 620 mm Form: (3x) 180 mm x 160 mm Labeler Brand MR Etikettiertechnik GmbH Model MR293 Hodpfewa D A Aex Ad Ren Machine number: 23646/05 Year of construction: 2004 Overall dimensions: 8800 mm x 1400 mm x 1960 mm Including suction device for resting film Dimensions: 600 mm x 500 mm x 1060 mm Without main vacuum pump, vacuum was regulated centrally, labeler is incomplete.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Hsdeyu Nqmspfx Ad Ron Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Hsdjyx Etgepfx Ad Rsn Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change Hodpfx Aowf Dvaed Ron - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: used, Year of construction: 2007, functionality: fully functional, film width: 1,500 mm, ILLIG Universal Thermoformer UA 250 1G with BE 250 sheet / roll, sheet size max. 2500 x 1500mm, forming area max. 2450 x 1450mm, mold height max. 860mm, material thickness max. 12mm Equipment machine: > automatic loading including roller block and Sheeter for additional roll production > Screen controls > Upper and lower heating can be regulated via 4 zones > Automatic pre-blow and demolding > Vacuum cascade can be set to 5 percentages - table speed, upper punch speed, pre-blowing, Hodpeft S Eajfx Ad Ren demoulding, table vacuum > 8-fold air-blowers D06 > Lot control at the table > Ball table for easier mold changes > pneumatic blow box ventilation > Plate loading with centering table > Various clamping frames / window panels incl. We offer the machine in the following technical state: 1. technically tested with dry run acceptance 2. technically overhauled, blending in green, tested with dry run acceptance 3. technically overhauled, completely repainted in white and blue, tested with acceptance in dry running (example image in white / blue)

Condition: used, functionality: fully functional, ILLIG Universal Forming Machine Type UA 155 4g solo Technical Data - Siemens control system - Max. material size: 1500 x 1250 mm - Max. forming area: 1450 x 1200 mm - Max. tool height: 700 mm - Max. material thickness: 12 mm - Heating capacity: 96 kW - Total power: 105 kW - Electrical protection: 160 A - Vacuum pump capacity: 250 m³/h - Compressed air requirement: 6 bar Features Hedoxlzqfspfx Ad Ren - Top heater with 5-zone HTS control (700ºC) - Bottom heater with 5-zone HTS control (500ºC) - Cooling fan D06 - Table cascade - Vacuum cascade - Top punch - Includes ILLIG chiller and ILLIG temperature control unit

Condition: used, Year of construction: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Maximum material size: 1500 x 1250 mm - Maximum forming area: 1460 x 1210 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic tooling infeed and removal function - Top heater with ceramic elements and 5-zone control - Bottom heater with ceramic elements and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Upper frame parallel, longitudinal crossbars for use with fixed-format frames Hjdpjxlzrcofx Ad Ren - Lower clamping frame for frame installation from below, central clamping via electric motor - Bottom table pneumatically operated, rapid/creep speed adjustable by percentage - Upper stamp rapid/creep speed adjustable by percentage - Pre-blow automation adjustable by percentage - Pre-vacuum adjustable by percentage - De-moulding automation adjustable by percentage - Sheet sag control by light barrier with support air - Six-fold cooling fan - Large front opening for tool changes - Vacuum pump Sheet Feeding - Automatic sheet feeding system - Finishing heater in feeding area for pre-heating or final heating of sheets - Motorized sheet lifter - Motorized adjustable sheet positioning - Motorized transport lifter - Motorized adjustable transport width

Condition: used, functionality: fully functional, Machine DU 1500 x 1000 x 620 T7 No. 98 15254 Plate size: 1000 x 800 mm, Draw depth: 620 mm Year of manufacture: 1998 Rated current: 238 A Hsdpfsxmgvcsx Ad Ron Total connected load: 164.5 kW Control system: Siemens OP 37 Equipment: • Loading/unloading machine • 6 cooling fans • Upper punch • Film sag control • Motorized adjustable clamping frame • Flash emitter • Heating pyrometer • Cooling pyrometer

Condition: reconditioned (used), > Upper heating with small individual radiators via toggle switch > Lower heating with large radiators > Upper stamping system > Protective grille > 4 cooling fans D05 > Automatic pre-blowing and demoulding Hjdpfx Adjfug Ans Rsn

Condition: used, functionality: fully functional, machine/vehicle number: W4X379R04317, Year of construction: 2004, operating hours: 2,257 h, load capacity: 1,000 kg, lifting height: 2,520 mm, fuel type: electric, mast type: simplex, construction height: 1,680 mm, fork length: 940 mm, empty load weight: 855 kg, drive type: Elektro, High lift truck Fahrgestellnummer: W4X379R04317 Mast type: Standard Technical condition: good Battery Volt: 24V Hsdpfx Adjuhw D Ej Ren Battery Ah: 200Ah Battery year of construction: 2015 Description: Linde L10 No.: M0082 Year of construction: 2004 Operating hours: 2,257 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other appliances on site. Scale,