Used Sgb Transformer for sale (730)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 118394, type of input current: AC, overall weight: 2,540 kg, input voltage: 21,500 V, input frequency: 50 Hz, nominal power (apparent): 800 kVA, secondary voltage: 420 V, protection type (IP code): IP00, temperature: 100 °C, type of output current: AC, output voltage: 420 V, Equipment: type plate available, Transformer that has been used on short occasions for backup operation, especially the last two years, is in a heated container. Can be sold with or without container, can also be rented for short periods, We have our own crane truck if express delivery is needed. The container can also be supplemented with low-voltage switchgear made by ABB Kabeldon attached to the outside of the container. Ksdpfxsx Run De Amrjlu

Condition: excellent (used), functionality: fully functional, For sale: Heidelberg SGB Cylinder 56 × 77 cm with hot foil stamping attachment. Die-cutting is also possible. The machine is in very good technical and visual condition – fully functional, ready for operation, and requires no additional investment. Price: 17,500 EUR / 74,000 PLN – negotiable. The set includes a honeycomb plate for hot stamping and a frame for mounting the cutting die. Viewing on site is possible. Klodpfx Ajycfnkomrju

Condition: good (used), Year of construction: 2012,

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, overall weight: 2,330 kg, input voltage: 11,000 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, empty load weight: 2,330 kg, type of output current: three-phase, output voltage: 400 V, Equipment: documentation/manual, type plate available, For sale: 1 new 11/0.4KV 630KVA transformer with small oil volume. Klsdpfx Ameyph Slsreu

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2700071001, type of input current: three-phase, input frequency: 50 Hz, nominal power (apparent): 1,600 kVA, Transformer from dismantling. Removed due to replacement with another one of higher power. Throughout its entire period of operation, the transformer underwent regular insulation resistance tests. The last test was valid until May 2025. TRANSFORMER AEG - MEFTA MEFTABLOK - used 1600 kVA TYPE: TZM 1600/15 No.: 2700071001 YEAR OF MANUFACTURE: 1997 POWER: 1600 kVA NUMBER OF PHASES: 3 Kljdpfx Ajxm S Spomreu FREQUENCY: 50 Hz

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 28461, overall weight: 3,860 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: EMIT 1000kVA Transformer Type: TA0o1000/15, serial no. 28461 50Hz HV 15,750V ±5% - 2x5%; LV 400/231V; Short-circuit voltage 5.34%; No-load losses 2080W; Load losses 11,090W; Total weight 3860kg; 50 Hz; active part 2200kg; oil 940kg; Current 3; Duty type C; Standard PN69/E06040 S1min Kjdpfx Amjyt Er Derelu Net price 12,000 EUR Price negotiable

Condition: used, Year of construction: 1980, functionality: fully functional, overall weight: 3,730 kg, input frequency: 50 Hz, nominal power (apparent): 1,000 kVA, Equipment: type plate available, For sale: 1000kVA Transformer BEZ BRATISLAVA CZECHOSLOVAKIA Type a T0394/22 Kedpfxoyt El Rj Amrolu 50Hz 15750±5%; 400/231V; 36.66A; 1444A Oil 840kg Total weight 3730kg S1min Net price: €12,000 Price negotiable

Condition: new, Year of construction: 2021, functionality: fully functional, type of input current: AC, overall weight: 100 kg, input voltage: 380 V, input frequency: 50 Hz, total height: 200 mm, total width: 300 mm, total length: 300 mm, nominal power (apparent): 20 kVA, secondary voltage: 44 V, temperature: 100 °C, input current: 55 A, type of output current: AC, output voltage: 44 V, Equipment: type plate available, New - 3 transformers. Kodjx D Uw Aepfx Amrolu 380/400/415V to 44V(460A)

Condition: excellent (used), For sale: ABB dry-type transformer. Type: DTE 100 / 1.1 3-phase dry-type transformer, 50 Hz Ksdpfx Amox Tzcysrjlu Year: 2003 Power: 100 kVA Connection: Dyn5 Voltage drop: 5.82% Weight: 745 kg Voltage: 400 V Condition: very good

Year of construction: 2009, condition: new, functionality: fully functional, Zinc electrolysis rectifier group supplied by Siemens consisting of : 1. Transformer 500 kA - power rating 2 x 16.78 MVA, primary voltage 6.3 kV, 50 Hz, secondary voltage 238 V, transformer cooling OFAF, 4 fans, 2 pumps 2. Two rectifiers DC100 kA, 125 V - number of thyristors mounting places 60 / 10 per phase, number of installed thyristors 54 / 9 per phase, thyristor T4301 N22 TOF, control range 85V to 125V DC, phase effect - per rectifier: 6-pulse, per group 12-pulse 3. Four DC – switches Ritter, Germany, type 2 x HCD-AI-D-100, 2 x HCD-AI-D-110, nominal current: 2 units 100 kA, 2 units 110 kA, motor drive 3 x 400V / 50Hz, auxiliary contacts 6 NO; 6 NC 4. Cooling group - cooling capacity 360 kW, type WFAF /water forced air forced/, internal water circuit 65% deionised water, 35% glycol, number of fans - 8 fans on outdoor heat exchanger, 2 coolers, conservator, cooling block group with pumps, heat exchanger with fans, pipes and consoles for cooling group 5. Control cubicled Kedpfeudxb Rex Amrolu 6. Overall rectifier control is carried out with a Simatic S7-300 PLC, with a CPU317-2DP, as central unit For more details, please feel free to contact us!

Condition: excellent (used), Year of construction: 2011, Buderus GB312 gas condensing boiler Output: 160Kw Viewing by telephone only! Kljdpfx Amsmnqb Eoreu Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: ready for operation (used), SSB Antriebstechnik DV-SgBH053-0480.600.40 geared motor SN: 96020557001, used, normal signs of wear, 100% functional, delivery as shown in photos. Kjdpfx Amsx Dwcherolu

Condition: ready for operation (used), Cooler KUBA Type: SGBE 63-F62 Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 Air flow: 16 800 m3/h Surface: 195 m2 Fin spinning: 7 mm Klodsh Atf Ijpfx Amrsu Electric heating Fans: 2 x 630 mm Dimensions: 3020 x 850 x 1000 Refrigerant: Freon Volume: 45 L Pieces in stock: 5 Stock number: CH 328 Condition: Used We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Evaporator GEA KUBA -Type: SGBE 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -Electric heating -Fans: 2 x 630 mm -Dimensions: 3020 x 1000 x 1000 mm -Block made of stainless steel -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 1 -Stock number: CH 597 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work Kledpsyx S Evjfx Amrju

Year of construction: 2018, condition: used, Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm Kjdpfx Aexpuv Ajmrolu -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: ready for operation (used), Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly. Klodpfx Amemt Efnsrou

Condition: new, Manufacturer: SBA TrafoTech GmbH Type: DS-UL-G140 Device type: Three-phase autotransformer Frequency: 50–60 Hz Kledpfezcgy Iex Amreu Protection class: I Degree of protection: IP23 Insulation class: B/F Maximum ambient temperature: 40 °C Design: UL-compliant transformer series DS-UL-G140

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Kedpfx Amozdktterslu Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: used, Available for sale via auction: 194 ABB industrial robots. The robots are available for immediate sale as a package and will be sold loaded onto flatbed trucks for transport from Castle Bromwich, UK. As part of its operational transformation to support the production of luxury electric vehicles under its Reimagine Strategy, JLR is repurposing used equipment. Keeping equipment in use helps reduce waste and supports the company’s sustainability goals. Auction sale in proud association with Gordon Brothers. Kjdpfozd R Rxex Amrjlu

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Klodpovtcvisfx Amreu Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Ksdpfx Amjy St Sdjrjlu Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 345 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. In addition, it has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. This model also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 Duos ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Kjdeh Ucrujpfx Amrolu On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 Kjdpfx Ajwvaidomrjlu 3,1 kW / 51 A. / 61 V. 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 345 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. And this model’s table has a lowering depth of 160 mm. You can give our managers a call for additional details! Wattsan 1290 Duos LT characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Kledervimxepfx Amreu Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK

Condition: used, Year of construction: 2020, The XYZ Machine Tools XYZ CT65 LTY CNC turning centre in excellent condition with 12-station VDI 30 live tooling turret, Y-axis capability, hydraulic tailstock, chip conveyor, through-tool coolant, and automatic lubrication system. Designed for high-precision turning and mill-turn applications with bar capacity up to 65 mm. Machine Specification: ----- CONTROL Seiemns 828D with Shopmill Conversational and G-code programming capability Electronic handwheel for setup and jogging Fully interlocked safety guarding ----- CAPACITY Chuck size (main spindle): 200 mm Maximum swing: 400 mm Maximum machining diameter: 220 mm Maximum turning length: 490 mm Maximum bar capacity: 65 mm ----- TRAVEL Travel (X axis): 220 mm Travel (Y axis): ±35 mm Travel (Z axis): 500 mm Rapid traverse rate: 20 m/min Cutting feed rate: 0.01–10 m/min ----- MAIN SPINDLE Spindle nose: A2-6 Maximum spindle speed: 4,500 rpm Spindle bore: 76 mm ----- TURRET Turret type: 12-station VDI 30 power turret Number of tools: 12 Turning tool size: 20 x 20 mm Maximum boring bar diameter: 32 mm Live tooling maximum speed: 4,500 rpm ----- TAILSTOCK Tailstock taper: MT4 Quill diameter and travel: 60 mm x 90 mm Hydraulic tailstock Programmable hydraulic tailstock (optional) ----- COOLANT & LUBRICATION Through-tool coolant system Flood coolant system Automatic lubrication system Coolant tank capacity: 80 litres Klsdpfx Asy S A D Nsmrju Oil skimmer (optional) Oil mist device (optional) Coolant gun (optional) ----- ACCESSORIES Chip conveyor and chip bin Parts catcher system Renishaw automatic tool setting arm Air gun Transformer Leveling bolts and blocks Tool kit ----- MACHINE SIZE Machine dimensions (L x W x H): 3240 mm x 1788 mm x 1838 mm Door opening width: 668 mm Machine weight: 4,400 kg Control: Siemens 828D Spec: Spindle bore 65 mm | Max Swing 400 mm | Travel X 220 Z 500 Y +-35 mm Accessories: Chip conveyor and chip bin, Parts catcher system, Renishaw automatic tool setting arm, Air gun