Used Remasawco Ab Rs-Logscanner 3D for sale (20,529)

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 Prsdpfsz Iypvsx Akiec - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, Year of construction: 2016, Overview Podpfxoz Hzgys Akijrc This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Immediately. Location: Spain.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Pedpfoz Dugnex Akierc Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: used, functionality: fully functional, power: 117 kW (159.08 HP), fuel type: diesel, color: gold, operation weight: 25,700 kg, Year of construction: 2011, operating hours: 15,000 h, Equipment: adjustable boom, air conditioning, cabin, rear view camera, CAT 323 D tracked excavator Year of manufacture: 2011 15,000 operating hours Pedpfxez Da Ude Akiorc 117 kW, 6-cylinder Mitsubishi engine 25,700 kg Variable geometry boom Camera Automatic climate control No quick coupler No bucket 3 m undercarriage width

Condition: excellent (used), Year of construction: 2020, operating hours: 450 h, functionality: fully functional, total height: 400 mm, total width: 800 mm, total length: 800 mm, travel distance X-axis: 5,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 5,000 mm, overall weight: 50 kg, repeat accuracy: 0.01 mm, Equipment: documentation/manual, KEYENCE WM-3000 Mobile 3D Coordinate Measuring System, Year of Manufacture 2020 For sale is a mobile 3D coordinate measuring system, KEYENCE WM-3000, year of manufacture 2020. The WM-3000 enables flexible and precise 3D measurement of components directly in production or at a testing station. Thanks to the optical tracking technology and the wireless measuring probe, the system is particularly suitable for dimensional accuracy checks and for comparing the actual and target dimensions of complex components. Technical data: Manufacturer: KEYENCE Type: WM-3000 Year of manufacture: 2020 Mobile 3D coordinate measuring system Measuring range: 5,000 mm Measuring accuracy: approx. ±28 µm Repeatability: up to approx. 10 µm Optical 3D measurement Prjdpfx Aoz Aynkekijc Wireless measuring probe Supply voltage: 220 V Weight: approx. 50 kg External dimensions: approx. 800 × 800 × 400 mm Suitable for: 3D dimensional inspection Quality control Actual vs. target comparisons Measurement of complex components Use directly in production The device is offered as used. Condition and scope of delivery, see photos or upon request. Subject to technical changes and errors.

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 800 mm, total height: 1,800 mm, Offered is a sausage hanging trolley with dimensions 180x80x80 cm. Wheels are new. 3 units available. Predpfsyh Itqex Akisc Further details upon request. Payment in cash or advance payment. Sale only to businesses. No warranty or guarantee.

Condition: ready for operation (used), Siemens 1FT6105-8AC71-4AB1 synchronous servo motor SN:YFB729378901001, used, normal signs of use, 100% functional, delivery as per photos Podpfx Akox Dutqeierc

Condition: ready for operation (used), Siemens 1FT6134-6AB71-2AL4 synchronous servomotor SN: C936096702001, used, normal signs of use, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Podpfx Asx Duxgekierc

Condition: new, Siemens 1LE1001-1AB59-0FB4 - Z Low Voltage Motor - IP55 SN: 1858351001001, unused, 100% operational, scope of delivery as per photos, Z see nameplate. Prjdox Dvrnepfx Akioc

Condition: ready for operation (used), Heidenhain / Siemens ID 736 FX2001-5JE22-3DA0 Encoder SN: 38263684A, used, in good condition, 100% functional, scope of delivery as shown in the photos Podpfx Asx Err Askijrc

Condition: used, Year of construction: 2019, * FAE Stabi FRS250 soil stabilization milling machine * Year of manufacture: 2019 * For tractor with 300 - 400 hp * PTO: 1,000 rpm * Working width: 2,560 mm * Overall width: 2,990 mm Podpfozax Uxsx Akijrc * 6,500 kg * Rotor: 1,085 mm * Max. working depth: 500 mm

Condition: new, mileage: 100 km, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes-Benz Arocs 2848 6x4 Roll-off Tipper | New Vehicle | Meiller RS21.65 | 476 hp Vehicle Description: For sale is a new Mercedes-Benz Arocs 2848 6x4 roll-off tipper with a high-quality Meiller Tectrum RS21.65 roll-off system. The vehicle impresses with its robust design, state-of-the-art assistance systems, and extensive comfort features. Ideal for municipal use, construction companies, and waste disposal and container services. Vehicle Data * Manufacturer: Mercedes-Benz * Model: Arocs 2848 * Vehicle Type: Roll-off Tipper * Axle Configuration: 6x4 * First Registration: New * Power Output: 350 kW (476 hp) * Engine Displacement: 12,809 cm³ * Emission Class: Euro VI-E * Transmission: Mercedes PowerShift Advanced Automatic * Permissible Total Weight: 26,000 kg * Wheelbase: 4,500 mm * Color: Graphite Gray Superstructure Meiller Tectrum RS21.65 * Container Length up to 6,500 mm * Hydraulic Internal Locking System * Telescopic Outrigger * Automatic Hook Height Adjustment * Load-dependent Fast Mode * Proportional Control * Aluminum Tool Box * Aluminum Mesh Box Equipment Multimedia Cockpit Interactive 2 * Navigation System * Reversing Camera * Leather Steering Wheel * Comfort Driver's Seat * Comfort Passenger Seat * Air Conditioning * Auxiliary Heater * Refrigerator * LED Main Headlights * LED Work Lights * LED Warning Lights * Light Sensor * Rain Sensor * Tire Pressure Monitoring System * Rockinger Trailer Coupling D40 * 390-liter Aluminum Tank * Digital Tachograph Generation 2 Assistance Systems Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Distance Keeping Assist * Lane Keeping Assist * Traffic Sign Assist * Attention Assist 2 * ESP * Cruise Control * Predictive Powertrain Control Highlights New Vehicle * Meiller Premium Roll-off Tipper RS21.65 * Extensive Safety and Comfort Features * Immediately Available * Financing and Leasing Possible * Flashing Lights at the Rear Podpfozi Iabjx Akiorc We are happy to provide you with further information.

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. Predpfxozimbkj Akioc On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Pedpfx Aezf N Rgokierc Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: new, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, Krone Profi Liner steel mesh semi-trailer, brand new! * Permissible total weight: 36,000 kg * Technical total weight: 39,000 kg * Tare weight: approx. 6,600 kg * Payload: approx. 29,400 kg * Loading area length: 13,620 mm * Loading area width: 2,480 mm * Saddle height unladen: approx. 1,150 mm * KRONE Profi Liner SDP 27 * New vehicle * Construction steel mesh version * 3 axles * Air suspension * Disc brakes * Lift axle * EBS with stability control system * Code XL certification * Multi Lock outer frame * Reinforced steel headboard Pedpfx Akezf Td Deiorc * Side panels 750 mm, foldable and removable * Rear panel foldable and removable * 16 lightweight, insertable side rails with integrated strap guide * Multi-Lash lashing system * Additional tensioning devices for construction steel mesh * KRONE Telematics Premium * Tire pressure monitoring system (TPMS) * LED lighting * LED reversing lights * Tool box * Storage boxes * Overwidth equipment * M+S tires If you have any questions, please do not hesitate to contact us!

Condition: used, mileage: 47,850 km, power: 125 kW (169.95 HP), first registration: 04/2025, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, Equipment: air conditioning, airbag, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill start assist, F2W Winter package, JA7 Blind spot assist, EY5 Mercedes-Benz emergency call system, F1K Coat hooks in the cab, EY6 Breakdown management, B25 Parking brake, electric, G43 9G-TRONIC, L65 Ceiling light(s) in the cab and passenger compartment with door contact, RS3 Steel wheels 6.5 J x 16, JK5 Instrument cluster with color display, Z1N Approval N1, XO9 Mercedes-Benz MobiloVan with DSB and GgD, VC4 Lashing rails on side panel to roof frame, L71 Cargo area lighting with motion sensor, XG7 Without payload restriction 3,500 kg, IR4 Wheelbase 3665 mm, HH2 Auxiliary hot air heating, electric, T75 Grab handles for driver and passenger entry, T77 Grab handle for entry into the cargo area sliding door on partition, XX4 Model year G4-II, W54 Rear doors, double-leaf, opening to the side wall, E1E Digital extra: hard drive navigation, HH9 Semi-automatic TEMPMATIC climate control system, E1D Digital radio (DAB), Y10 First aid kit, MJ8 ECO start-stop function, 805 AEJ X4/1, ES0 Jump start – connection, D03 High roof, ES5 Charging package dashboard, E1U USB socket 5 V, MS1 TEMPOMAT (cruise control), FM3 WET WIPER SYSTEM, T85 Entry handle on rear left B-pillar, HI1 Climate zone 1 (cold/comfort), T86 Entry handle on rear right B-pillar, RM0 All-season tires, V43 Wooden floor, V42 Lashing rails on side panel to bulkhead, XY5 Model year 5, C6L Multifunction steering wheel, LA2 Headlamp assistant, ZM0 Van, IT4 3.5-ton vehicle, J55 Seat belt warning system for passenger seat, H16 Seat heating for driver, J58 Seat belt warning system for driver's seat, H15 Seat heating for passenger, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, V52 Wheel arches can be loaded, W73 Step on rear door, VV2 Cargo securing rail system, ED4 Fleece battery 12 V 92 Ah, FF5 Storage compartment above. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Furthermore:!! Pedpfjznlugex Akiorc Leasing/financing and trade-in possible!! !! !! - Errors and prior sale excepted!! - All information without guarantee ... more on our homepage

Condition: refurbished (used), Risco 200 litres mixer Product capacity 100 / 150 litres Prsdjzmaahjpfx Akiec Twin paddle mix arms End door discharge Forward and reverse mix arms Refurbished condition

Condition: used, TEDAK 3 Dust Filtration Unit Specifications: Psdpfx Akezmd Troierc Manufacturer: TEDAK AB Country of origin: Sweden Model: TEDAK 3 Article No.: 111200 Serial No.: 13246 Operating pressure: 30 kPa Electrical control cabinet included Filter housing included Suitable for filtration of wood dust, chips and other dry materials in the woodworking industry

Condition: new, functionality: fully functional, machine/vehicle number: NM0KKTP66XSE90490, mileage: 191 km, power: 243 kW (330.39 HP), fuel type: diesel, empty load weight: 6,925 kg, maximum load weight: 29,000 kg, tire size: 315/60 R 22.5 154/148L, tire condition: 100 %, axle configuration: 4x2, wheelbase: 5,500 mm, axle spacing: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, suspension: air, number of seats: 2, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2025, operating hours: 8 h, Invoice number: 90009 Prsdpfxjzqa Ako Akiec Chassis: NM0KKTP66XSE90490 Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - Truck Center Limburg - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV 1 + 1 year warranty Available for immediate delivery

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished) Podpfx Akozqf I Eoierc

Condition: new, maximum load weight: 18,800 kg, overall weight: 22,000 kg, Year of construction: 2026, RSM Roll-Off Container 38m³ with Hydraulic Tailgate and Grain Pusher Pedpfx Akjwgcrpoijrc * Type ECO-2 * Year of Manufacture 2025 * Volume 38m³ * Dead weight 3,200 kg * Payload 18,800 kg * Load capacity 22,000 kg * Hydraulic volume tailgate * Grain pusher * All-round net hooks The RSM universal container, the all-rounder for all requirements, complies with the standards of DIN 30722 Part 2 and is an ECO Type 2 with a permissible total weight of 22,000 kg. We are happy to provide you with further information.

Year of construction: 2024, condition: new, weight max. in kg 300 kg dimensions 1200 x 900 x 1300 mm weight 125 kg For attaching to the forks. fastening with safety bolts, checker plate floor, entry door, safety grille, storage basket for tools, Fork pockets 190 x 100 mm, powder-coated. Prsdpfx Aksxcywrjijc Approved for a maximum of 2 people, approved by the dekra. Basket height 1050 mm Basket width 1100 mm Basket depth 700 mm

Condition: new, bore capacity in steel (diameter) 60.0 mm threading M 42 throat 350 mm bore stroke 200 mm turning speeds 60 - 1530 U/min table: 720 x 510 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 200 mm feed 0.15-0.2-0.3-0.36 mm/U distance spindle /table 159 / 884 mm engine output 3.6 / 4.3 kW weight 605 kg Machine height 1950 mm Furnishing : - automatic feed with electromagn. Feed clutch - 4 feed levels 0.15 / 02, - 0.3 - 0.36 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation - digital speed display - machined base plate Prodpfx Akoxabgieioc including special equipment: - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 - LED machine light pos. 12.

Condition: new, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 615 x 430 mm turning speeds 100 - 1800 U/min column diameter 145 mm thread M 24 ST60 thread M 30 GG20 feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 138 / 688 mm engine output 1.4 / 2.2 kW weight 470 kg Predpfx Aksxab Nkoisc Machine height 1865 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - Electromagnetic feed clutch * with overload protection and electrical * Comfort cross-handle switch * Feed rates selectable 0.1-0.2-0.3-0.4 mm / rev - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 12. LED machine light - 24. Coolant system A * in the machine base

Condition: used, Year of construction: 2005, x-travel 2000 (775 + 600) mm y-travel 620 mm z-travel 520 mm Control Heidenhain iTNC 530 turning speed range - main spindle 12.000 min/-1 power capacity - main spindel 18 kW table surface area 1.200 x 600 mm rotary table diameter Ø 500 mm swivellable +15/-95 ° rotatable 0- 360 ° max. table load 1000/350 kg tool taper SK 40 number of toolpositions 30 pos. internal coolant system feed 20 bar rapid traverse ( X / Y / Z ) 30 m/min dimensions 5,0x 2,5 x 3,3 m weight of the machine ca. 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe Psdpfx Akjxbh D Doijrc - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spindle in 2016 at 20.800 Spindle hours