Used Ras Gmbh Plate Shear for sale (74,478)

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Njdext Rk Dspfx Aaajla

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Nedpfx Aaox Hfgvsaola

Year of construction: 2001, condition: ready for operation (used), Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible. Nodsx Hz Nyopfx Aaaola

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear used for a maximum of 40 hours only, maximum cutting capacity 3.5 mm sheet thickness, used exclusively for 1.5 mm coated sheets, hold-down opening 25 mm (can be reset to factory specification), stroke rate 56/min, light barrier, cutting angle 1.6°, rated power 4.0 kVA, weight 860 kg Nsdpfsxal Uwex Aaaela

Year of construction: 1975, condition: good (used), Machine number: 1019 TyP / Model: NG 3B Nledpoh N S Ucofx Aaaja Working width: 2.000 mm material thickness: 3 mm table: 2.005 x 400 mm column width: 2.100 mm Stroke: Stroke rate: 50 /min backgauge: 400 mm Connection: 5,5 kW accessories/equipment: foot release Condition: good weight: 3 t dimensions: 2.600 x 1.350 x 1.500 mm

Condition: used, Year of construction: 1980, Technical data: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg Equipment: · Manual back gauge Nedpfx Astvfzceaasla · Cutting gap adjustment · Cutting angle adjustment · Cutting line illumination

Condition: used, Year of construction: 1962, Working length: 1020 mm Sheet capacity max.: 3.5 mm Dimensions (WxDxH), approx.: 1640 x 1860 x 1390 mm Nledperh D Ttjfx Aaasa

Condition: used, Year of construction: 1997, sheet width 0610 mm Nledpfjxu Nrpox Aaaea plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m

Condition: new, Year of construction: 2026, 3050 mm 12,0 mm 0,5-3,0 ° 1000 mm Nljdpfx Aoxpi Dheaaja table height 930 mm work height max. 930 mm

Condition: new, Year of construction: 2025, sheet width 1360 mm plate thickness 06,0 mm table width 455 mm Njdpfxoxpi Dbe Aaajla work height max. 880 mm cutting angle 1°30 ° rear stop 750 mm

Condition: new, Year of construction: 2024, 3050 mm Nsdjwp Tfrepfx Aaasla 06,5 mm 0,5-2,5 ° 1000 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 51600 € 975.24 € 3080 mm 6 mm 4 mm 350 mm 20 1/min 0.5 - 2 ° 16 20 to 1000 mm 200 mm/s 11 kW 125 l 3 Stk. 820 mm 494 mm 3280 mm 4100 mm 2050 mm 3650 mm 1950 mm 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots Nsdpfswirwtjx Aaasla oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, neu Nedpfswiq Epjx Aaaela 2026 090187 prompt, Zwischenverkauf v Türkei 14400 € 276.48 € 1 1350 mm 3 mm 35 1/min 550 mm 3 kW 2 Stk. 850 mm 400 mm 1900 mm 1350 mm 1260 mm 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 145000 € 2740.5 € 6080 mm 6 mm 4 mm 350 mm 10 1/min 0.5 - 2 ° 29 20 to 1000 mm 200 mm/s 22 kW 200 l 5 Stk. 900 mm Nledpfxowiqyge Aaaea 630 mm 6370 mm 7300 mm 2150 mm 3400 mm 2750 mm 25500 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port CNC controlled cutting gap adjustment by the table (patented) oil cooler manual central lubrication cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 5 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo)

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° Nsdpfsww Nccox Aaaela down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: good (used), Year of construction: 1995, Max. cutting length 3050 mm Material thickness 37 kg/mm² 12 mm Material thickness 70 kg/mm² 8 mm Cutting angle 1.8 degrees Stroke rate 8 - 13 min. Number of hold-down clamps 12 Drive power 18.5 kW Dimensions L x W x H 4150 x 1950 x 1950 mm Weight 8000 kg Accessories / Special features: • ELGO Type 71 motorized NC positioning control for the backgauge, length approx. 900 mm • If necessary, the toggle lever system allows the machine to operate with only one cylinder at a reduced cutting capacity of approximately 55% of the nominal capacity. This simultaneously increases the cutting sequence for more efficient work with thin sheet metal. Switching from fast to slow is done using a selector switch on the control panel. • Hydro-mechanical drive via a powerful toggle lever • Easy cutting gap adjustment on both sides • 2 cylinders mounted externally on the machine, easily accessible Nledjvkw Dvopfx Aaaja • Vertical, stable guides • Upper and lower blades each with 4 cutting edges • Hydraulic overload protection • Proportional force of the hold-down clamps • The machine frame is a fully welded construction and is machined in one setup (no screwed parts) • Portable electric foot switch • Blades suitable for black sheet metal and stainless steel • Ball transfer units in the table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1988, condition: used, sheet width 1500 mm plate thickness 3 mm Nsdpfx Aslp U Txsaaela weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: used, sheet width 2000 mm Nsdpfxexfwdzs Aaasla plate thickness 3 mm rear stop von Hand, 750 mm dimensions ca. 2800 x 1120 x 1510 mm weight ca. 1800 kg

Condition: used, Year of construction: 1996, sheet width 1350 mm plate thickness 3 mm Nodjwngqfjpfx Aaajla cutting angle 1° 30' no. of strokes 35 Hub/min table height 850 mm rear stop 450 weight of the machine ca. 1200 kg dimensions ca. 1700 x 1650 x 2000 mm manually operated back gauge 450 mm working lifght included safety gate included

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm Nodpjr Ngtisfx Aaaela 3 support arms 1 angle stop pneumatic hold-down device Backgauge to be operated by hand

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg Nlsdpfx Aaegg N Hbsaja - 400V

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. * Nsdpeu Icp Asfx Aaajla

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Nedpfx Aeu Icnfeaasla Positionable backgauge *

Year of construction: 1983, condition: used, sheet width 1250 mm plate thickness 3,0 mm distance between columns 900 mm power requirement 2,2 kW dimensions 3,27 x 1,69 x 1,29 m weight of the machine ca. 1,6 t used compact mech. guillotine shear Nlodpfx Aaonwr Dtsaja - strokes per minute: 50

Year of construction: 2021, condition: new, - Capacity 1350 x 3 mm - Manually operated back gauge - Foot-operated - Photocell protection of the back gauge - Raised arms - Illuminated cutting line - Brake motor - Emergency stop - Documentations - 400V Nedpfxog Tmz Uj Aaaela