Used Pelissier Straightening Press - Single Column for sale (22,680)

Condition: new, Year of construction: 2019, pressing force: 110 t, pressure:110 t stroke:400 mm weight of the machine ca.:4,5 t dimensions:ca. 1650 x 1150 x 2800 mm return capacity:11 t total power requirement:11 kW Max Working height:500 mm :10 mm :10 mm/sec. speed rapid traverse:10 mm/sec :400 mm pestle plate:600 x 500 mm table plate:800 x 700 mm Table cut-out:150 x 150 mm table height over floor:900 mm :250 l Bedsfxygtspfx Aa Ieln Monitor SIEMENS:7 Zoll Side trim:2.800,- ? :4.800,- ? Light barriers front and back:2.400,- ?

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm Bljdjy Tvdxspfx Aa Ijn - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m punch diameter:max. 105 mm sheet thickness - max.:6 mm stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm Bledpjh Ra Rnofx Aa Ion input unit:0,01 mm

Year of construction: 1990, condition: used, pressure 100 t Bjdpfxelp U Tuj Aa Ioln throat 275 mm stroke 150 mm table surface area 860x550 mm ram surface 600x400 mm table height 810 mm tool hole in ram Ø 50 mm dayligth max. 475 mm weight of the machine ca. 7 t dimensions of the machine ca. BxTxH 2000x2500x3300 mm

Condition: new, Year of construction: 2026, pressing force: 100 t, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Bodpfx Asfu Nqxoa Ioln Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Year of construction: 1987, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 50 / 75 Hub/min ram - range of adjustment 85 mm table surface area 1150x670 mm Bjdpep Apxhofx Aa Ioln ram surface 800x380 mm hole in the table 330x200 mm table height 800 mm tool hole in ram Ø 50 mm weight of the machine ca. 8 t dimensions of the machine ca. BxTxH 2000x2000x2700 mm

Year of construction: 1986, condition: used, pressure 100 t throat 340 mm Bodpop Syczsfx Aa Ijln stroke 8-140 mm no. of strokes 50 Hub/min ram - range of adjustment 110 mm table surface area 1000x700 mm ram surface 650x450 mm hole in the table Ø 180 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 10,5 t dimensions of the machine ca. BxTxH 2300x1600x3500 mm

Condition: used, Year of construction: 1990, pressure 25 t Bljdpfxet Hw Ezs Aa Ijn throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm Bjdpfxezrpn So Aa Isln table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Blodpfovbk Rwex Aa Ijn Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Year of construction: 1996, pressure 80 t throat 320 mm stroke 6 - 118 mm no. of strokes 30 - 80 Hub/min ram adjustment 70 mm Bjdpstycdkefx Aa Isln table surface area 830 x 610 mm ram surface 650 x 400 mm column daylight (nach hinten) 630 mm total power requirement kW weight of the machine ca. 8,1 t dimensions of the machine ca. B 1,2 x T 1,9 x H 3,3 m Furnishing: - with gear transmission - fixed table - automatic stroke adjustment - automatic ram adjustment - hydr. Overload - Ejector - Grease central lubrication - Cover plate for drainage hole - Continuous speed control using a frequency converter - Machine is technically checked in our company and receives a new control cabinet with safety controls and touchscreen - current UVV test with braking time measurement

Condition: new, Year of construction: 2026, pressure 150 t throat 300 mm stroke 400 mm Blsdpfx Ajyfwxtja Ijn dayligth 600 mm table surface area 1000 x 600 mm Control Siemens S7 hole in the table 0 mm ram surface 1000 x 600 mm working feed 5 - 15 mm/sec speed down 130 mm/sek speed up 180 mm/sek power requirement 18 kW weight of the machine ca. 12,0 t dimensions 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm Blsdpfx Aeyfwywoa Isn dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine Bjdedzqptspfx Aa Isln - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm Bledjcxxwcepfx Aa Ion no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m Bodszrpppjpfx Aa Ieln with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Bodpeiuxwqjfx Aa Ioln Höhe 3.600 Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Condition: new, Year of construction: 2019, machine/vehicle number: DF0369, pressing force: 220 t, pressure:220 t passage width:1500 mm Bledpfx Aefxyivsa Ijn stroke:400 mm weight of the machine ca.:5,2 t dimensions:ca. 4000 x 1950 x 2900 mm return capacity:20 t total power requirement:30 kW Max Working height:500 mm :10 mm :10 mm/sec. Return Speed:25 mm/sec speed rapid traverse:10 mm/sec pestle plate:2000 x 400 mm table plate:2000 x 600 mm table height over floor:900 mm :500 l Oil cooling (electric):1,5 kW (max) measuring system:TURCK oder Balluff :S7 1500 oder PILZ PSS 4000 Monitor SIEMENS:oder OMRON

Year of construction: 1991, condition: used, pressure 100 t throat 380 mm stroke 300 mm arm length 380 mm Blodpolp U Ayjfx Aa Isn table surface area 1700x700 mm ram surface 1400x700 mm dayligth 650 mm total power requirement 30 kW weight of the machine ca. 10 t dimensions of the machine ca. 2400x3600x3400 m

Condition: used, Year of construction: 1990, pressure 75 t throat 290 mm stroke 12 - 100 mm ram adjustment 80 mm no. of strokes 140 Hub/min table surface area 830 x 560 mm ram surface 630 x 300 mm total power requirement kW Bedpet Ev T Iefx Aa Ieln weight of the machine ca. 6,1 t dimensions of the machine ca. m

Condition: new, functionality: fully functional, pressing force: 28 t, stroke length: 150 mm, table width: 300 mm, table length: 325 mm, throat depth: 225 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Blsdpoyg Dr Asfx Aa Ijn Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm Bljdpszrppvefx Aa Ien table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: new, Year of construction: 2026, pressing force: 100 t, Durendus DCD-100 – Hydraulic Deep-Drawing Press in C-Frame Design 15–100 t – 800 × 600 mm For sale: a hydraulic C-frame deep-drawing press (single-column press) from Durendus with an adjustable pressing force from 15 to 100 t. This machine is designed for demanding forming, deep-drawing, and assembly tasks. It is equipped with an integrated deep-drawing cushion and a state-of-the-art Siemens control system. Featuring high travel speeds and precise control, it is ideal for both series production and flexible single-part applications. ===== Technical Data & Information: Hydraulic C-Frame Press – DCD-100 ==== General Specifications - Manufacturer: Durendus - Model: DCD-100 - Design: C-frame / single-column press - Pressing force: 15–100 t (adjustable) - Total weight: approx. 6,500 kg - Overall dimensions: approx. 1,850 × 1,845 × 3,520 mm - Table height above floor: 1,000 mm ==== Working Area - Max. distance table – ram: 1,000 mm - Stroke: 0–700 mm (adjustable) ==== Table & Ram - Table size: 800 × 600 mm - Ram size: 800 × 600 mm - T-slots: according to DIN 650, 18 mm, cross arrangement ==== Speeds - Rapid traverse speed: 180 mm/s - Working speed: 22 mm/s - Return speed: 180 mm/s ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Main pump: Bosch Rexroth, approx. 65 l/min - Motor power: 11 kW + 1.5 kW - Oil tank capacity: approx. 280 l - Hydraulic block: Duplomatic - Filter: Filtrec - Cooling: air cooler ==== Additional Functions - Deep-drawing cushion: 50 t, stroke 250 mm, speed 50 mm/s - Ram ejector: 10 t, stroke 100 mm ==== Control & Operation - PLC: Siemens S7-1200 - Touch panel: Siemens SIMATIC 10" - Programmable: up to 99 programs - Adjustable: pressure, stroke, speed, lubrication - Positioning accuracy: up to 0.1 mm - Remote maintenance available ==== Safety & Equipment - Two-hand operation - Safety PLC - Monitoring of all operation statuses via display - Oil temperature and filter monitoring - Automatic shutdown in case of overheating ===== Deep-drawing, forming, assembly operations, punching processes, series production, toolmaking Single-column press, C-frame press, deep-drawing press, hydraulic press, industrial press, tryout press, tool try-out press Bledpfx Aajyw I T Hs Ien Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety requirements. Additionally, our presses exceed Canadian and European safety standards by fully complying with the national Brazilian safety guideline NR 12, which is based on these requirements. Our core strengths are special machine construction and press automation. We supply bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: used, Year of construction: 1996, Technical details: pressure: 6,3 t throat: 170/180 mm stroke: 310 mm power capacity: 3 kW dayligth: 775 mm weight of the machine ca.: 1,5 t clamping table: 470 x 330 mm table height over floor: 800 mm C-Type 1 Station Blsdpfxotxdmwo Aa Ion *

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm Bsdpfet Hwwdjx Aa Ieln total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m