Used Padovani Lathe - Cycle-Controlled for sale (50,420)

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres:1600mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Duodpewz Rywsfx Afmjw Main motor - HP

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 52 mm, turning diameter: 360 mm, center height: 180 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 750 mm, total height: 1,400 mm, spindle speed (max.): 1,750 rpm, spindle speed (min.): 60 rpm, overall weight: 1,800 kg, Conventional lathe, center high 180 mm, between centers 1000 mm, bore Ø 52 mm, 12 speed 60 - 1750 rpm, motor 4 kw, camlock 5'', ; equipement: coolant device, 3-jaws chuck Ø 200 mm, tool post MULTIFIX with 7 toolholders, steady rest, lamp, dimensions 230x115x165 cm, weight ca. 1750 kgs Duodpfjx Dl Nvjx Afmjw

Year of construction: 1996, condition: ready for operation (used), Center distance: 1500mm, max. rotational speed: 2500/min, spindle opening: 77mm, chuck diameter: 250mm, swing over bed/ slide: 510/330mm, controls: Siemens SINUMERIK 805, connected load: 20kW, weight: 3t, with stainless steel tab, steel holder and tool cone, an inspection is possible. Dodpfx Ajp Sr Rgsfmsuw

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Dsdpfey D E Rijx Afmsuw Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) Duodpfx Afoxz Tfajmsw - Speed regulation on slide. - Works great

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Dodpfx Asxdmgvofmeuw Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Dusdpfx Aszfiipjfmsw Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Duodpfeyyupmex Afmew Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: used, Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Duodpjzkkcusfx Afmow Newall 2 Axis Digital Read Out

Condition: excellent (used), Webster Bennett 48" Elevating Rail Vertical Turning Lathe Dedpfxezh Ndrs Afmsuw With Copying attachment 48" diameter table Can be shown demonstrating at our premises if you wish to view.

Condition: excellent (used), Webster & Bennett 72" Elevating Rail Vertical Turning Lathe with copying attachment 72" diameter table Can be shown demonstrating at our premises if required. Djdezh Ndfopfx Afmjuw

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Dujdev I Ddqopfx Afmew Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Dsdpfx Afoq N Ay Ajmeuw Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Duodpfxjrfx Tno Afmsw Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard Duedpfx Asnr Nl Sofmsw

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Dusdpfx Ajwmlckjfmow Can also be repainted at extra cost Cleaned and serviced

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Dsdpfx Afoy Drunjmouw Okuma OSP 7000L Control

Condition: excellent (used), Year of construction: 2017, operating hours: 6,365 h, functionality: fully functional, 2017 Citizen Cincom A320-VII CNC Sliding Head Lathe (Installed 2019) High Specification 25.4mm Sliding Head Lathe with Iemca Boss 338 Bar Feed, Mist Extraction, Swarf Conveyor, Adaptive Guide Bush & FireTrace Available now is this exceptionally well-equipped Citizen Cincom A320-VII CNC sliding head lathe, installed in 2019 and supplied complete with an Iemca Boss 338 3.7m magazine bar feeder, Mist Control 850 extraction system, Cromar 500-micron swarf conveyor, FireTrace fire suppression, Adaptive Guide Bush and 25.4mm capacity option, Air Blast Kit. Machine Specification 20mm bar capacity with 25.4mm upgrade fitted 7 controlled axes (X1, X2, Y1, Z1, Z2, C1 & C2) Switchable guide bush / guide bushless operation Maximum machining length 200mm per chucking Main spindle 10,000rpm Sub spindle 8,000rpm 21 tool positions 5 gang turning stations 4 front drilling stations 8 back drilling stations 4 live tool stations (1 driven holder included) Maximum front drilling Ø10mm Maximum back drilling Ø8mm Front tapping M8 Back tapping M6 Gang live tooling 6,000rpm (4,500rpm rated) 150-litre coolant tank LED work light USB & PC card data transfer Dusdpszkluxjfx Afmew Adjustable operator panel 2,200kg machine weight Cincom Control Features Program pre-analysis On-machine program verification Direct C-axis indexing Axis feed overlap Constant surface speed Rigid tapping Front & rear spindle C-axis control Continuous thread cutting Spindle synchronisation User macros 1MB program memory Tool life management External memory machining Network I/O Direct Drawing Dimension Programming (DDDP) Included Equipment Iemca Boss 338 (3.7m) magazine bar feeder Cromar swarf conveyor with 500-micron filtration Mist Control 850 oil mist extraction FireTrace fire suppression system Adaptive Guide Bush 25.4mm machining package Workpiece conveyor Rotary guide bush Coolant flow monitoring LED work light 3-colour signal tower Production Capability The Citizen A320-VII is renowned for producing complex turned and milled components in a single operation. Combining sliding headstock technology, Y-axis machining, driven tooling and sub-spindle capability, it offers exceptional accuracy, repeatability and productivity for both subcontract and OEM manufacturers. This machine is supplied as a complete turnkey package with quality automation and ancillary equipment, making it ready for immediate installation and production. Full specification, additional photographs and video available upon request.

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Dujdpfezhaqvex Afmsw Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Number of Tool positions 8

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Date of manufacture - 2024. Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Duodpoydlg Ajfx Afmsw Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Condition: used, Year of construction: 2012, machine/vehicle number: STA00161, XYZ CT52 2 Axis CNC Lathe Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2012 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79246 Machine Serial Number: STA00161 £19,950.00 + VAT Dujdpfx Aezkbirjfmsw Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2011, 850mm Swing, 525mm Max Cutting Diameter, 1310mm max turning length, Dusdpfx Aezhwghsfmsw 10 Station Turret, 102mm bar capacity, 2800rpm 22kW Spindle, Fanuc I series, 3 jaw chuck, Low Volt Light, Tailstock,

Condition: ready for operation (used), chuck outer diameter: 1,050 mm, turning diameter: 1,050 mm, rotational speed (max.): 117 rpm, Model: 36 EM Table Dia: 42” (Oversized) Max Swing: 42” Dedpszggfdsfx Afmouw Table Speeds: To 117 RPM

Condition: excellent (used), Year of construction: 2010, Capacity Swing over bed 750mm / 29.5" Swing over carriage 480mm / 18.9" Max. Turning diameter 750mm / 29.5" Max. Turning length 3935mm / 155" Distance between centres 4000mm / 157.5" Max. load between centres 3000kg Max. load by chucking 750kg Spindle Spindle speeds 3-1000rpm spindle speed range manual 2 steps Spindle nose type A2-11 Spindle bore 6.9mm / 6.9" Spindle taper MT6 Carriage Max travel X axis 425mm / 16.7" Max travel Z axis 3935mm / 155" Rapid traverse X axis 3m/min / 120ipm Rapid traverse Z axis 6m/min / 236ipm Ball screw (diameter x pitch) X axis 32 x 5 mm Dujdszfac Tepfx Afmow Z axis 50 x 10mm Cross side width 260mm / 10.2" Turret tool post Curvic type H-4 (Manual) Number of tool positions 4 Tool site 32 x 32mm (1.25 x 1.25") Tailstock Taper in tailstock spindle MT6 Tailstock quill stroke 200mm / 7.9" Tailstock quill diameter 112mm / 4.4" Motor Main spindle motor AC18.5/15kw (25/20HP) X axis servo motor AC1.0 kW (1.3HP) Z axis servo motor AC2.9KW (3.8HP) Lubricant pump motor for headstock 0.2kW coolant pump motor 0.18kW Lubricant pump motor for apron 0.025kW

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Duodpfszd Uv Ejx Afmew 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment