Used National Machinery Double-Stroke Header National 61Ms for sale (80,591)

Condition: good (used), functionality: fully functional, Length: Diagonal 190 cm Horizontal 90 cm Width 30 cm Bodpfxov I Umvo Ammedc Height of posts 4 cm

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Bdedpfx Amsrfdckjmjc Oil separator Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Bdodpjxn Aagofx Ammjc

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Bodpfx Aswc A Rkommsdc

Condition: new, Year of construction: 2025, type of input current: three-phase, total height: 800 mm, total width: 2,093 mm, total length: 3,400 mm, overall weight: 3,200 kg, working height: 11 mm, warranty duration: 12 months, air pressure: 7 bar, feed rate Y-axis: 60 m/min, working width: 2,400 mm, The automatic machine for the production of packaging containers from corrugated cardboard, model KDT WG8C1-2400S, is used in manufacturing facilities of all sizes that offer specialized packaging services and use packaging in various sizes and designs. The system has been developed to automate the packaging process in your company, making it as simple and convenient as possible. With this machine, you can produce any type of carton for your products according to your specifications and your customers' requirements. Bedpfx Amjynlrgomedc

Condition: new, Year of construction: 2025, functionality: fully functional, power: 30 kW (40.79 HP), input frequency: 380 Hz, type of input current: three-phase, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 100 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 2,150 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,415 mm, total length: 4,500 mm, total width: 3,350 mm, overall weight: 5,000 kg, CNC Nesting Machining Center KN 3710DE – 3-Axis – 2150 x 3100 mm. Immediately available from stock. For sale is a high-performance new CNC nesting machining center KN 3710DE. This machine is ideally suited for processing MDF, chipboard, HPL, plastics, and composite materials. Technical specifications: • Working area: 3100 x 2150 mm • X-axis: 3100 mm • Y-axis: 2150 mm • Z-axis: 100 mm • Total power: 30 kW • 3 axes • Vacuum table for board machining • Automatic tool changer (depending on configuration) • CNC control system • Connection: 380–400 V The machine is ready for operation. Ideal for furniture production, interior fittings, and series manufacturing. Bjdpfx Aoynhlismmedc Further information and photos available upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 24 m/min, total length: 6,200 mm, overall weight: 2,600 kg, Equipment: documentation/manual, New (year of manufacture 2025). Immediately available from stock. The KDT KE-710BT is a professional solution for precise edge banding of curved (contoured) workpieces. The machine combines flexibility with the highest industrial quality. Highlights and features: • Precise CNC control: Easy programming for complex geometries. • Automatic trimming and milling: Complete edge processing in a single pass. Bdedpfxoym Arhe Ammoc • Highly efficient gluing system: Even adhesive application for perfect joints. • User-friendly interface: Intuitive operation via touchscreen.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 2,800 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 50 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 50 m/min, workpiece length (max.): 2,800 mm, workpiece width (max.): 1,000 mm, control type: CNC control, High-performance CNC drilling center KDT KD-610NHZ for six-sided machining of workpieces. Immediately available from stock. Upper and lower drilling units. Precise machining and high speed. Ideal for carcass furniture production. The machine can be inspected by appointment. Bdedpfjymz Alex Ammsc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: LR2009MAHEDEDM100PO1, type of input current: AC, total width: 1,150 mm, total length: 2,850 mm, total height: 1,900 mm, overall weight: 1,100 kg, outer diameter of label roll: 550 mm, inside diameter of label roll: 76 mm, input voltage: 380 V, compressed air connection: 6 bar, For sale is a fully automatic mask machine DM-85-P (CE version) with 380V connection – suitable for masks Type II and IIR. The mask machine is designed to process multi-layer fabrics into various masks by means of forming folds, ultrasonic welding, ear loop welding, and nose wire welding. The fully automatic mask machine Lianrou LR-DM-85-P is a late-generation model and is also a patented product by LIAN ROU. Bdjdpfx Aeya Hdbemmsc Compared to traditional disposable mask machines, it offers the following advantages: First, the LR-DM-85-P requires only one unit to complete the entire mask production process, which significantly reduces the space required for the production line; second, it features an integrated production design with an aesthetically clean and organized structure. Most importantly, it is equipped with a range of reliable safety features, thus ensuring a safe operating environment for the operator. In summary, this machine stands out for its excellent cost-performance ratio and high reliability. Technical data / Notes: Model: DM-85-P Design: Electric-Pneumatic Voltage: 380V Certification: CE Manufacturer’s documentation and wiring diagrams included If interested, please get in touch – viewing by appointment possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: chip conveyor, documentation/manual, CNC-Drehmaschine Chuan Chay CT2-52YM mit Top Automazioni Stangenlader Baujahr: 2014 | Top gepflegt | Standort: Baden-Württemberg _____ Zum Verkauf steht eine sehr gepflegte und voll einsatzbereite CNC-Drehmaschine des Typs Chuan Chay CT2-52YM, ausgestattet mit einem automatischen Stangenlader von Top Automazioni. Die Maschine stammt aus einem Konzernbetrieb, in dem sie regelmäßig gewartet und sorgfältig gepflegt wurde. Sie befindet sich in technisch wie optisch sehr gutem Zustand und ist sofort verfügbar. _____ Technische Daten • Hersteller: Chuan Chay • Modell: CT2-52YM • Baujahr: 2014 • Steuerung: Mitsubishi • Max. Stangendurchlass: Ø 52 mm • Achsen: C-Achse & Y-Achse • Gegenspindel • Angetriebene Werkzeuge • Späneförderer & Teilefänger • Stangenlader: Top Automazioni Bedpfxjwg Dabe Ammedc • Standort: Baden-Württemberg _____ Zubehör • 16 Werkzeughalter für Außenbearbeitung • 12 angetriebene Werkzeuge • 10 Werkzeughalter für Innenbearbeitung • ca. 30 Spannzangen • 2 Spannzangenköpfe • 8 Greifer-Armbacken in verschiedenen Größen _____ Highlights • Sehr gepflegter Zustand • Laufend gewartet (bisher im Konzernbetrieb im Einsatz) • Sofort einsatzbereit • Optimal für Klein- und Mittelserien • Attraktive Komplettausstattung _____ Besichtigung nach Absprache möglich. Die Maschine ist ab sofort verfügbar. Transportorganisation und Verladung können auf Wunsch unterstützt werden. Bei Fragen oder Interesse freuen wir uns auf Ihre Kontaktaufnahme. _____ CNC Turning Machine Chuan Chay CT2-52YM with Top Automazioni Bar Feeder Year of Manufacture: 2014 | Excellent Condition | Location: Baden-Württemberg, Germany _____ We are offering for sale a well-maintained and fully operational CNC turning machine of the type Chuan Chay CT2-52YM, equipped with a Top Automazioni automatic bar feeder. The machine was previously operated in a corporate environment, where it was regularly serviced and carefully maintained. It is in very good technical and visual condition and is immediately available. _____ Technical Data • Manufacturer: Chuan Chay • Model: CT2-52YM • Year: 2014 • Control System: Mitsubishi • Max. Bar Capacity: Ø 52 mm • C-axis and Y-axis • Sub-spindle • Driven tools • Chip conveyor & parts catcher • Automatic bar feeder by Top Automazioni • Location: Baden-Württemberg, Germany _____ Included Accessories • 20 external turning tool holders • 12 driven tools • 10 internal turning tool holders • approx. 30 collets • 2 collet heads • 8 gripper arms in various sizes _____ Highlights • Excellent overall condition • Regularly serviced (previously operated in a corporate environment) • Ready for immediate use • Ideal for small and medium series production • Well-equipped with useful accessories _____ The machine is immediately available. Viewing can be arranged by appointment. Support with loading and transport logistics is available on request. We look forward to your inquiry and will be happy to provide further information.

Year of construction: 2018, condition: as good as new (ex-display), Offer here as new machine for gluing shafts including corner gluing machine and many high quality tools. Box sizes: Minimum: 80x65x10 mm Maximum: 430x350x120 mm More details and price after personal consultation Bjdog U Irwspfx Ammedc

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Bedpfxoyzbzrj Ammjdc Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Year of construction: 1996, condition: good (used), machine/vehicle number: 25295, Capacity (mm): 24x150 Production (max): 120 ppm Optional Warm Former Bdsdpfx Aedv T Hlommoc

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Bodpowg Sd Ujfx Ammodc Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Bedpewg R Rtsfx Ammedc

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Bdsdpfewg Sgcsx Ammsc Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Bedoyhhx Aopfx Ammodc Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Year of manufacture: 2015 Bdjdpjx Nc Ddofx Ammsc Fully operational

Condition: good (used), Various measurement cards & racks from NI available, see listing: To be sold completely or in parts Photos are exemplary NI PXI-1045 189105K-01L 2 units NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix 2 units NI PXI-6251 M Series Multifunction DAQ Bjdpfx Aswpgy Ajmmedc NI PXI-8331 MXI-4 2 units NI PXI-6232 M Series Multifunction DAQ 10 units NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Contr 191435B-712 without Expresscard NI PXI-6229 M Series Multif DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 terminal board TBX-68 83420 DAQ Termination Board 3 units SCXI-1331 184268C-01 Rev. 3.1 2 units Cable 188841B-02 SH37F-SH37M-2 10 units See also my other test and measuring equipment. We also buy.

Year of construction: 2018, condition: excellent (used), DOUBLE-SIDE MILLING MACHINE RMD 6030M MINIMUM LENGTH OF WORKING MATERIAL 250MM MAXIMUM LENGTH OF WORKING MATERIAL 3000MM minimum thickness - 5mm maximum thickness - 85mm tools: Bedpfx Ameiu Ia Nsmedc - scoring tool can be set vertically, horizontally and at an angle, outer diameter 160-180 mm, opening 25.4-40mm (with a washer) - cutter - the cutter can be moved up and down. left and right and angled. the machine includes a receiving table, a feeding table (separate photo) If you have any questions, please contact me. The machine is practically unused

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Bsdepwdwbopfx Ammjdc Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Repair required: Bearings on one spindle which is already outside.

Condition: new, Year of construction: 2026, overall weight: 4,750 kg, rotor diameter: 350 mm, number of blades: 62, total length: 1,850 mm, total height: 2,170 mm, total width: 2,670 mm, rotor length: 920 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. Bdsdpfx Asg Dcq Tjmmjc • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Year of construction: 2026, condition: new, Ready-to-deliver press feeding line for scaffolding plank production with 4 Ton decoiler, straightener feeder and 200 Ton C-type press. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide with strong R&D capabilities. This scaffolding plank feeding line is available from stock and ready for fast delivery. The system is designed for perforating, punching and feeding operations in scaffolding plank production and similar metal forming applications. The line combines stable coil feeding, precise straightening and high-capacity press performance in a compact and efficient production solution. Ideal for companies looking for immediate production capacity without long manufacturing lead times. ⚡ FAST DELIVERY ADVANTAGE Stock machine – ready for shipment Fast delivery opportunity Reduced investment waiting time Ready for industrial production setup ⚙️ TECHNICAL CONFIGURATION Coil Width: up to 600 mm Mechanical Decoiler: 4 Ton Capacity Straightening Servo Feeder System C-Type Mechanical Press: 200 Ton Capacity Servo synchronized feeding operation Heavy-duty industrial structure 🔧 LINE COMPONENTS 4 Ton Hydraulic Decoiler Straightening Unit Servo Feeder System 200 Ton C-Type Press Electrical & Automation System Operator Control Panel ⚙️ ENGINEERING FEATURES High precision feeding performance Stable straightening and synchronized press operation Heavy-duty press structure for continuous production Servo motor controlled feeding system Compact and operator-friendly design Suitable for integration with roll forming systems ⚡ OPERATIONAL ADVANTAGES Immediate availability from stock Reliable and continuous production Reduced setup and commissioning time Flexible use for punching and perforation applications Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Scaffolding plank production Perforated metal production Sheet metal punching applications Roll forming pre-feeding systems Construction industry components Bdsdsy Nnftjpfx Ammec

Condition: excellent (used), Double bench grinder Bdjdpfx Amsk Iwx Ejmoc

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590 Bodpfx Ajpu A D Asmmsdc