Used Muro 4 X 5000 A4/Had 4-Station Bookbinding Press For Gluing for sale (98,672)

Condition: used, 2-station notching machine and folding machine EUROMAC type Multi 220/6R Press brake, press brake, notching machine Serial no. M11941298 Year of manufacture 1998 Cutting capacity 6 mm steel at 45 kg/mm2 4 mm for stainless steel Station I (notching) Notching angle 60° to 140° (with special blade from 30° to 140°) Knife length 220 mm Table size 950 x 640 - Manual angle adjustment via hand wheels - Notching angle with built-in blade set from 60° to 140 - Hydraulic clamping of the upper and lower knives - Automatic cutting gap adjustment - sheet hold-down device - Scaled measuring tapes embedded in the table - stop rails with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 ton Table size 950 x 340 Working height 1100 mm Crsdpfxsmck Rye Aptjf - stepless lifting speed - Infinitely adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4x 90° prisms, length = 415 mm - 90° upper tool, length = 415 mm Motor power 4 kW Mains connection 400 Volt, 50 Hz Space requirement L x W x H 1150 x 1050 x 1460 mm Weight approx. 1000 kg good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Csdpsxpqy Dsfx Aptsrf Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: good (used), Equipment: type plate available, Ystral Type X 11,000 S/LDT-4-154P Disperser based on the rotor-stator principle Cjdpfozp Nvwox Apterf on a stand, without control unit The YSTRAL disperser is designed for the production of emulsions and suspensions in the medium-viscosity range. It meets high requirements for fine dispersion, even in the medium-viscosity range, and is used for batches up to 2,000 liters. Drive: 2,910 RPM / 11.0 kW

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press Cjdozp Ex Uepfx Aptorf - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Included: – Electrical Motor – Springs Crjdpfxeg Snuds Aptjf Vibrating screen will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: Parker Crsdpfx Apog Snuletof Type: T / D RAPID 1,5 x 4 Size: 1.500 x 4.000mm Decks: 3

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emission standard Long-distance driver's cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle 6x2 axle configuration Wheelbase: 5,300 mm Tyres: 315/80R22.5 Flatbed/tarpaulin body dimensions (L x W x H): 7,200 mm x 2,500 mm x 2,550 mm Tail lift: D'Hollandia 2,000 kg Unladen weight: 16,326 kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Radio remote control 5th and 6th hydraulic functions for additional attachments 2 hydraulic extensions 3.20 m / 5,400 kg 4.60 m / 3,750 kg 6.40 m / 2,650 kg Crsdexwzrgopfx Aptof 8.40 m / 2,020 kg 10.40 m / 1,540 kg (mechanical extension retrofittable by manufacturer) Hook height: approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export/net price: €59,900 All information without guarantee, errors excepted.

Condition: used, mileage: 412,600 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 16,326 kg, maximum load weight: 9,674 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 45 m³, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, DAF XF480 6X2*4 Flatbed/Tarpaulin Truck with Crane First registration: 04/2019 412,600 KM with documentation Euro 6 emissions standard Long-distance driver cab with 2 beds Automatic transmission Air conditioning, auxiliary heating Adaptive cruise control Lane departure warning system Leaf/air suspension 3rd axle is a steering axle Crjdpfxsxwzras Aptjf 6X2 axle configuration Wheelbase: 5300mm Tyres: 315/80R22.5 Flatbed/tarpaulin body: Length: 7200mm x Width: 2500mm x Height: 2550mm Tail lift D'Hollandia 2,000kg Unladen weight: 16,326kg Crane: Hiab X-HiDuo 188 B-2 Year of manufacture: 2019 Only 296 crane operating hours! Radio remote control 5th and 6th hydraulic circuits for additional attachments 2 hydraulic extensions 3.20m / 5400kg 4.60m / 3750kg 6.40m / 2650kg 8.40m / 2020kg 10.40m / 1540kg (mechanical extension retrofittable by manufacturer) Hook height approx. 12 meters The vehicle is from first ownership and is in very well-maintained condition. Export / net price: 59,900 Euro All information without guarantee, errors excepted.

Condition: used, mileage: 193,000 km, power: 338 kW (459.55 HP), first registration: 10/2019, fuel type: diesel, empty load weight: 14,250 kg, maximum load weight: 11,750 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, next inspection (TÜV): 06/2026, brakes: intarder, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, including house, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), intarder, auxiliary drive, automatic transmission, differential lock, fog lights, work lights, revolving beacon, tool box, leaf/air suspension, last axle liftable and steerable, trailer hitch with air, light, and hydraulic connections, lashing eyes, U-shaped guard, flap tailgates, roof hatch, crane behind the house, emergency stop, grapple control, foldable, elevated platform, 2-point hydraulic support, remote control, 5x hydraulic outriggers, green environmental badge. Wheelbase: 3900 mm, Body: 3-sided tipper body with aluminum side panels & Hiab X-HiDuo 188 ES-5 crane with remote control, Transmission: 12 TX 2621 TD with intarder! Load chart: 4.6m-3400kg, 8.4m-1640kg, 14.7m-840kg! Pallet fork available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Credpfx Ajy U Id Tsptsf

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 20,600 kg, maximum load weight: 5,400 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,550 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,340 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Lg. Haus. Features include: 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, left and right electric windows, air conditioning, sun visor, radio-CD, cruise control, navigation system, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, automatic transmission, hydraulic lifting and lowering, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, trailer coupling with air and electric connectors, aluminum fuel tank, steerable and liftable rearmost axle (hydraulically steered), lashing rings, container locking system, underrun protection, side aluminum underrun protection, swinging tailboards, roof hatch, rear-mounted crane, emergency stop, grab control, folding type, 4-point hydraulic outriggers, radio remote control, 8x hydraulic extensions, green environmental sticker. Wheelbase: 5,550 mm. Body: flatbed body with aluminum side panels, TwistLock locks for 20" containers, rear-mounted Hiab X-HiPro 548 E-8 crane, radio remote, 8.5t front axle, ABS, EBS, full emergency braking assistant, Eco retarder, disc brakes on front and rear axles, MAN EasyStart hillholder, emergency braking signal, MAN TipMatic 12.26 DD gearbox with retarder 35, steered and liftable trailing axle, stabilizer on front and rear axles, LED daytime running lights, cornering light, high beam assistant, 4kW additional water heater, lower sleeper berth, refrigerator, ESP, ASR, lane departure warning, driver alert system, MAN Media System Navigation Professional, NTX/10c auxiliary drive. Load diagram: 2.2 m – 18,000 kg; 4.6 m – 9,900 kg; 6.1 m – 7,200 kg; 7.8 m – 5,300 kg; 9.6 m – 4,100 kg; 11.4 m – 3,300 kg; 13.4 m – 2,680 kg; 15.5 m – 2,240 kg; 17.5 m – 1,940 kg; 19.6 m – 1,720 kg! Loading height approx. 1,200 mm! Winch available for an additional charge (€25,000 net)! A detailed specification is available on request. New vehicle from stock with day registration 09.08.2023. Accessories information provided without guarantee; subject to change, prior sale, and errors excepted. Codpfx Ajzbiy Ujptorf

Condition: ready for operation (used), Indramat CLM 01.3-X-0-4-B controller, serial number: 24787010914, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Csdoi Ebbxspfx Aptorf

Condition: ready for operation (used), ABB Robotics, 2 x PS 60/4-50-P-LSS-3985 servo motor combination, serial numbers: 910.8090020-063 / 910.8090020-029, professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Crsdpfxsi D Eyce Aptef

Condition: excellent (used), Technical specifications: Retrofit in 2026 Crsdpfx Aszbcwmoptjf Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Crsdpjzfvvvofx Aptjf Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use Codpfxjza D U Dj Aptjrf The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting Crjdovpalajpfx Aptof parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Crjdpfxjwkaalo Aptef Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), machine/vehicle number: 940957, Year of construction: 1992, Technical data: Csdpfx Aozqzubepterf - Load capacity: 4 t - Usable height: 690 mm - Overall height: 800 mm - Crossbeam support made of steel structural hollow profile: 140 x 140 mm - 3 load-bearing hooks - Grid spacing with 5 holes on the left and right: 200 mm - Overall length (approx.): 2100 mm - Overall width (approx.): 200 mm - Weight (approx.): 130 kg

Condition: good (used), Year of construction: 2005, Offer 23060 Technical Data: - Load capacity approx. 5000 kg - Solid rubber tires 6.00 - 9 - Platform length approx. 2980 mm Credpfozqzrmox Aptof - Platform width approx. 2430 mm - Platform height approx. 650 mm - Overall length with drawbar approx. 5850 mm - Overall width 2530 mm - Weight approx. 600 kg

Condition: good (used), functionality: fully functional, working width: 1,040 mm, sheet thickness (max.): 4 mm, 4 mm bending capacity, manual operation with a large counterweight, large protective housing, additional bending tools. Crodpfozr Nrqex Aptef

Condition: used, Year of construction: 2023, operating hours: 744 h, Bobcat E17 mini excavator, manufactured in 2023, with only 744 operating hours and 4 buckets! ---- * Manufacturer: Bobcat * Model: E17 * Year of manufacture: 2023 * Operating hours: approx. 744 Crodpfx Ajzp Ayveptsf * Includes 4 buckets * Quick coupler * Fully enclosed cabin * Adjustable undercarriage * Operating weight: 1,711 kg * Kubota diesel engine * Price: 16,900 euros, net + 19% VAT ---- For further questions, please call: Erik Kortum: WhatsApp All information is subject to change without notice and does not constitute a guarantee. Errors and prior sale are reserved.

Condition: ready for operation (used), Press technology for laminated veneer lumber (LVL) and similar products. BSH press Crodpfozqdytex Aptjf Cross-laminated timber (CLT) press Glued laminated timber (glulam) press

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Csdpfx Apein Et Neterf Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: used, first registration: 07/2009, Year of construction: 2009, Equipment: ABS, SCHMITZ GOTHA BDF cradle, galvanized, standard • 4 units available • Drawbar adjustable by 600 mm • GVW: 18,000 kg • Unladen weight: 2,700 kg • 2 x 9-ton SAF axles • Fully air-suspended • Tires: 385/65 R 22.5 • Excellent tread pattern! • Galvanized/anodized frame • Lifting/lowering system • German trailer! • 1st owner! • MOT/TÜV/SP: NEW! Cjdjwmpa Tjpfx Aptjrf Subject to errors and prior sale! = Further information = Damage: none = Further information = Payload: 18,000 kg Damage: none

Condition: used, first registration: 08/2016, Year of construction: 2016, H&W galvanized carriages for bridges up to 7.82 m long with forklift mount and lifting axle 3 available!! For all bridge lengths (7,150 / 7,450 / 7,820 mm)!! Forklift mount!! • Fully galvanized / anodized carriages • Very low Cedpjwmn Uiefx Apterf • 2 x air-sprung 9-ton SAF axles • Lifting / lowering system • Tires 435/50 R 19.5 • Disc brakes • Lifting axle (1st axle)! - German carriages! - 1st hand - TÜV / SP: NEW! Subject to errors and prior sale.