Used Mr Wickeltechnik Ccm 2000 for sale (10,672)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning Hnsdpfxsw Emh Se Abkeu * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: good (used), Year of construction: 1986, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform Hedew Hyfmspfx Abkonu -Scissor lift table: with weighing unit and trolley, each without control, and weighing display -Load capacity: 2000 kg -Platform: 4000 x 1420 mm -Dimensions retracted: height 430/675 mm -Extended dimensions: height 1145/1390 mm -Rolling chassis: roller spacing for rail 1100 mm -Transport dimensions: 1420/4000/H675 mm -Weight: 2600 kg

Condition: new, turning length 2000 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25.0 - 1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 180 mm quill: 5 MK spindle bore 105 mm spindle taper DIN 55029 D 1-8 engine output 7.5 kW weight of the machine ca. 2720 kg range L-W-H 3340 x 1150 x 1610 mm Equipment: Hnjdoxabtpepfx Abkju - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, input voltage: 400 V, DGUV certified until: 09/2027, total length: 1,140 mm, overall weight: 285 kg, total width: 800 mm, total height: 1,620 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 285 kg, Beating machine Rego SM 2000 M The machine for all beating applications! Mixing machine with timer control 2 working functions: 1 x mixing / 1 x beating Manual kettle lift Simple technology Connection: 400V, 16A CEE plug Used machine, refurbished With warranty + spare parts service + Quality from a specialist company! Benefit from over 35 years of experience! Options: New kettle New beater Ring gas burner Maintenance contract Hnsdpfx Abow Tqihjkju Service package Delivery service Instruction / Commissioning Visit our large exhibition of bakery machines!

Condition: good (used), Workbench, work table, assembly bench, assembly table, worktable, wooden workbench table, aluminum workbench table -Workbench: Workbench table with drawers / solid construction, height adjustable -Width: 2000 mm -Depth: 800 mm Hnjdpszrlirjfx Abksu -Height: 760 mm, adjustable, see photos -Weight: 74 kg

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Hnodpfxezrpnle Abkou Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Dittel BM 2000 Balance - measuring device SN:239-5209, the housing has a small dent on the right side, see photo, used, in good condition, 100% functional, delivery as per photos Hjdpfex Eq Hxox Abkjnu

Condition: used, Year of construction: 2008, Technical details: Hjdpfszd Su Eex Abkjnu standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS III greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Barfeeder Interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. *

Condition: used, Year of construction: 2000, Overview This filling monoblock was manufactured in 2000 by Germany MAG Schymanski. The machine is designed for the hot filling of juice and non-carbonated beverages. The system is equipped with 28 filling valves and 4 capping heads. The machine is already dismantled and stored. Technical data - Capacity: approx. 3,500 – 6,000 bottles/hour - Formats: 0.5 L / 0.7 L / 1.0 L / 1.5 L - Application: Hot filling of juice and non-carbonated beverages - Configuration: 28 filling valves / 4 capping heads Hnjdpfjzd S Ixox Abkou

Condition: used, Mitsubishi Electric MR-S12-100B-E01 Version C Servo Drive / Controller For sale is a used Mitsubishi MR-S12-100B-E01 Version C servo drive / servo controller. The unit was removed from a working machine and shows normal signs of use. Ideal as a spare part for CNC machines, automation systems, and industrial production equipment. Hjdpfoy Ubbxox Abkjnu Technical Data Manufacturer: Mitsubishi Electric Model: MR-S12-100B-E01 Version: C Type: Servo Drive / Servo Amplifier Made in Japan Condition: Used Removed from a working machine Cosmetic condition: see pictures Scope of delivery as shown in the photos Notes 7-day functional warranty

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Through-feed drilling machine, CNC controlled, with drilling heads on the right, left, 4 above, and 7 below. Hjdpfey U H R Esx Abkenu

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 Hnedpfozuyh Uox Abkou 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 1997, operating hours: 34,000 h, travel distance X-axis: 570 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details. - Main Drive: 19 kW- Machine Control: NUM / Keller/Plus (IBM Monitor setup)- Maximum Torque Duty Cycle: 60% / 100%- Torque: 1800 / 1400 Nm- Max Rapid Traverse (Longitudinal/Cross): 10 / 5 m/min- Tool Turret: 8-position disc turret, Sauter VDI 30- Chuck: Forkardt three-jaw chuck installed, diameter 200 mm- Included Accessories: Steady rest- Operational Status: Out of service since mid-2023 due to operator retirement- Operating Hours: Approx. 34,000 hours (single-shift operation/power-on time) Hjdpfxozuyqco Abkenu Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2000, - Cutting length: 3300 mm Hodpfx Ajzuy A Sebkonu - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW Panel dividing saw Manufacturer: Holzma Type: HPL 23/X/33/22/30/L Year of manufacture: 2000 Technical specifications - Cutting length: 3300 mm - 3 air cushion tables - Lifting table: 3300 x 2200 mm - Saw blade overhang: 125 mm - Main saw: 18 kW - Scoring saw: 2.2 kW - CADMATIC control system - CADMATIC control system Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, mileage: 23 km, power: 130 kW (176.75 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,640 mm, next inspection (TÜV): 05/2028, color: grey, driver cabin: other, emission class: euro6, number of seats: 7, loading space volume: 7.9 m³, loading space length: 2,320 mm, loading space width: 1,760 mm, loading space height: 1,930 mm, construction height: 2,590 mm, working width: 2,040 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, Tow hitch up to 3.5 tons (optional), navigation via smartphone possible, warranty 5 years or 250,000 km from initial registration (according to the manufacturer's warranty conditions). Body style: High roof in vehicle color, Climatic air conditioning, central locking, exterior mirrors electrically adjustable and heated, power windows front, Multifunction display Plus, Digital Cockpit Pro (digital instrument display), hill start assist, lane keeping assist, emergency braking assistant (Front Assist) including pedestrian and cyclist detection, traffic sign recognition, distraction and fatigue detection, speed control system (cruise control), Intelligent Speed Assist including speed limiter, multifunction steering wheel, parking assistance front and rear, reversing camera, partition, spare wheel with road tires, summer tires, heated windshield, light and rain sensor, LED headlights, LED daytime running lights, digital radio reception (DAB+), infotainment with touchscreen color display 26 cm (10.4 inches), Bluetooth hands-free system with wireless charging function, audio system Composition (radio - touchscreen color display - USB interface), W-Lan / Wifi hotspot, mobile online services App-Connect Wired and Wireless, emergency call system, tire pressure monitoring system, heat-insulating glazing, storage package 2, tachometer, driver airbag, airbag driver/passenger side - passenger airbag can be deactivated, anti-lock braking system (ABS), electronic stability program (ESP), air suspension seat, comfort seats, center armrest, driver comfort ErgoActive suspension seat (20-way seat adjustment - massage function) with armrest and lumbar support, rear headrests, light assistant (Coming Home - Leaving Home), start/stop system, diesel particulate filter, service history available, sliding door loading/passenger compartment right, immobilizer (electronic), headlight range control, exterior temperature display, power steering electro-mechanical, preparation for trailer coupling (socket and cable), tinted windows, paint: Ascot Grey, wooden floor with interior paneling, mud flaps rear, passenger double seat with storage/stowage compartment and backrest that can be folded down to form a stowage table, chassis: dampers and stabilizers reinforced - front and rear, front bumper in grey with trim in vehicle color, trailer stabilization program, mobile phone interface, multimedia interface 2 USB-C (center console) with increased charging power - 2 USB-C charging ports (center - front), truck registration, non-smoker package, storage: 2 DIN compartment in front under the headliner, interior lights in the driver's cab: front reading light, permissible gross weight 3.50 t, underbody paneling with CW value, radiator grille with chrome strip on top, exterior mirror convex - left, exterior mirror convex - right, LED turn signals integrated into exterior mirror, automatic headlight activation, windshield wipers with intermittent operation - adjustable, floor covering in the driver's cab: rubber, entry handle on the rear pillar left, entry handle on the rear pillar right, grab handles A-pillars, remote control key (2) foldable, seat belt warning system (driver/passenger side), interior lights in the driver's cab: LED, interior lights in the loading/passenger compartment: LED, glove compartment with flap, preparation for alcohol interlock (Alcolock), dual-tone horn, sockets (12V connection) in the driver's cab (2 pieces), lashing eyes in the cargo area, brake assi Hnedpfx Aezizbfobkeu

Condition: used, mileage: 74,053 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, with house, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lift and lower function, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, connections for air and light for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Hjdpfx Abjzbvdaoksnu Wheelbase: 4500 mm, Body: Wiedemann Super 2000 body, Capacity (sludge), 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large HD hose reel: approx. 180 m high-pressure hose DN38, a small HD hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external transfer pump (rotary lobe pump Jurop VL14) for work with large water volumes. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heater, hand washing basin (hot/cold). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Heidenhain, controller model: ITNC 530, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hedelius C60 Control system: Heidenhain iTNC 530 Year of manufacture: 2006 Travel ranges: X-axis: 2000 mm Y-axis: 620 mm Z-axis: 520 mm Clamping area: 2500x600 mm Table load: approx. 2000 kg Tool holder: SK 40 Tool magazine: 30 positions Spindle speed: 20 - 8000 rpm Accessories: - Coolant filtration system, 600 l - Internal cooling - Chip conveyor - Electronic handwheel - Magnetic chuck, 1200x600 mm - Table-mounted control panel TS27R (tool measurement) - Measuring probe RENISHAW RMP 60 - Glass scales in all axes Special features: The magnetic chuck is fully integrated into the Heidenhain control system and can be conveniently operated both via the central machine control panel and via the controls on the machine doors. This enables short setup times and easy, safe operation directly at the machine. Hnsdpfezbzqxox Abkju Subject to changes and errors in technical data and specifications, as well as prior sale.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. TECHNICAL DATA • Maximum turning length: 2000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mount: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev, 25 steps • Z-axis feed: 0.044–1.48 mm/rev, 25 steps • Tailstock quill diameter: Ø90 mm • Tailstock taper: MT5 • Tailstock quill travel: 235 mm • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm, 54 ranges • Module threads: 0.25–60 mm, 46 ranges • Whitworth threads: 7/16–80 TPI, 54 ranges • Diametral Pitch threads: 0.88–160 DP, 42 ranges • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3740 × 1140 × 1910 mm • Weight: approx. 3800 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard • Splash guard • Coolant system • Reduction sleeves • Dead centre • Tool set Hnedpfjyzz Sqox Abkeu APPLICATIONS Suitable for machining: • shafts and large cylindrical components, • tapers and stepped parts, • internal and external threads, • repair and maintenance components, • general industrial production work. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,320 mm, total width: 1,600 mm, total length: 1,600 mm, power: 15 kW (20.39 HP), SPYRA chip crusher / shredder - For reducing the size of chips containing tramp material - Warranty available upon request! - Fully operational and ready for immediate use - Tramp materials in the chips are no issue for this machine; it has been specifically engineered and patented for this application. Hnjdew N Rv Tjpfx Abkeu Throughput capacity: 0.6 - 1.2 m³ / hour Actual throughput depends on chip type, characteristics, and the quantity of tramp material.

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) Hedjwh U Avspfx Abkenu - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: good (used), Year of construction: 1994, - Hourly output: Up to 2,000 cartons Hjdpfxjwifwaj Abkenu - With NORDSON hot melt device - Machine in good condition

Condition: used, Year of construction: 2007, UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 Hnsdpfx Abexn Nlvjkju - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight-mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5 % Images are examples of a machine of the same design*

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm Hnedoxm R S Uopfx Abkju -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: good (used), Clamping plate, marking-out, welding table, welding table, straightening plate, marking-out plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1515 mm Hsdexnxnmspfx Abksnu -Table height: 800 mm -Plate thickness: 130 mm -Transport dimensions: 2000/1515/H800 mm -Weight: 3250 kg

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Hodpfx Absxxb Rroksnu For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.