Used Mhs Basic Breadslicer for sale (2,027)

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder, in good condition. Device features: - Schröder MHSU shear - Cutting capacity: see nameplate, up to 3mm steel; significantly more for aluminum - Working length: just over 2 meters - Manual backgauge approx. 750 mm / a 1000 mm backgauge is equipped with digital display - Side/angle stop - Extension arm up to 2 meters - Reversible blades - Cutting gap lighting - Sheet metal chute - Foot pedal - Weight approx. 1.3 t We also have other machines available, such as the Schechtl MAX 200 – 2.5mm, or Schechtl MA 200 – 2mm and HA series, Schröder AKV 2mm, KSV 1.5mm, and KS 1mm, as well as folding machines and shears by RAS, etc. The current net new price is approximately 25,000 EUR. You will receive an invoice with VAT shown separately; VAT is included in the invoice amount. Shipping can be arranged if requested. Forklift available on site. Free loading as shown in the pictures. Viewing and test run possible by phone appointment. Njdpfey R Efajx Aqwoda Payment in cash upon collection. If there is anything else I can assist you with, please give me a short call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number Schröder MHSU 2m 3mm 260511

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a 3-side sealed sachet. Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. Device for grouped bag output. PLC controlled, operation via touch screen. - Specifications: max. speed of the machine in neutral: 110 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62,5x50 mm; roll width tea bag material: 125 mm (optional 140 mm); suitable tea bag material: 16.5-21g/m², one side heat sealable; 3-side sealed sachet dimensions LxW: 80x70 mm; sachet material: heat sealable mono films or laminated composite film; label (LxW): 26x24 mm; thread length: 210 mm; power supply: 220/380V; power consumption: 3kW; compressed air required: 0.6 MPa; compressed air consumption: 100-300l/min; machine dimensions LxWxH: 1400x905x2475 mm; weight: 910kg. Ndedpfxsv Nm Sye Aqwsa

Condition: new, Year of construction: 2025, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a pillow bag (up to 5 tea bags in one sachet possible). Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; pillow bag dimensions LxW: 100x130 mm, L is adjustable (vffs); pillow bag material: heat sealable mono films or laminated composite film; label (LxW): 26/28x24 mm; thread length: 210 mm; power supply: 220/380V; power consumption: 2W; machine dimensions LxWxH: 1400x905x2475 mm; weight: 910kg. Ndsdpev Nlhyefx Aqwja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, SHRINKtunnel suitable to be combined with AMTEC Shrink Wrapper speed shrink 35M. High speed shrinking with 0-20 m/min for POF (Polyolefin) film. - Specifications: max. packaging size: L(customized)xW400xH250mm; tunnel size: L1500xW500xH300mm; power: 380V, max. 16kW; machine dimensions and weight: L1800xW990xH1300mm, 650kg. Ndjdpev Nl Tpefx Aqwsa Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40M (vertical) PRO-version, AMTEC Shrink Wrapper FLOWshrink W100-L High speed PRO-Version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW300xH230mm; tunnel size: L1200xW350xH380mm; machine dimensions: L2200xW900xH1160mm; power consumption: 380V, 14kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ndsdpev Nl Utjfx Aqwea

Year of construction: 2025, condition: new, Automatic packing machine for filling and packing tea into tea into common rectangle tea bags with final packing of the tea bag into a pillow bag (up to 5 tea bags in one sachet possible). Including Volume dosing unit and tag system. Tag system: both sides (label-thread and thread-bag) by heat sealing. - Specifications: max. speed of the machine in neutral: 115 cycles per minute; dosing volume: max. 6cm³; tea bag dimensions LxW: 62.5x50 mm; roll width tea bag material: 125 mm; suitable tea bag material: 16.5-21g/m², one side heat sealable; pillow bag dimensions LxW: 100x130 mm, L is adjustable (vffs); pillow bag material: heat sealable mono films or laminated composite film; label (LxW): 26/28x24 mm; thread length: 210 mm; power supply: 220/380V; power consumption: 2W; machine dimensions LxWxH: 1400x905x2475 mm; weight: 910kg. Nodpfx Aev Nm Sasqweda

Condition: good (used), 6 Head Multi-head Horizontal Bandsaw Saw pulley diameter: 915mm Sawblade width (max): 100mm Standard saw speed 35m/s Timber width Max: 305mm – 450mm Maximum opening saw to chain bed: 305mm Feed chains to saw lines 292mm Main motor: 6x 18.5kw Feed speeds (variable): 15 – 60m/min std, 7.5 – 30m/min (optional) Ndedpfey Hb Ucjx Aqwea Type of feed: internal overhead feed system with driven chains synchronised with chain bed Operators control station including speed control and start stop controls Working height 800mm

Condition: new, Year of construction: 2026, Gannomat hinge boring and hardware insertion machines are hardware manufacturer independent and designed for the precise drilling and insertion of hardware. Robustness, durability and ease of use distinguish our universal hinge drill machines. Nsdpsdx Axujfx Aqwoda Short introduction: • Independence from hardware distributors and manufacturers • Precision drilling unit with steel gears and steel clutch • Universal application: hinges, row of holes as well as line drilling, connectors and fittings, handle and through holes, holes for drawer slides, ... • Massive and stable tilt stops • Distance from the front stop to drilling spindles up to 300 mm (Basica Variabel)

Year of construction: 2026, condition: new, Modular compact press feeding solutions including decoiler, straightener feeder and integrated decoiler-straightener systems. Bosporas Machinery is a manufacturer of coil processing, press feeding and roll forming systems, delivering high-performance and customized industrial solutions worldwide. Our compact press feeding systems are designed for efficient coil feeding, material straightening and press automation in a wide range of industrial applications. These systems can be supplied as complete compact lines or as standalone units for modernization and retrofit projects. Whether for new production investments or upgrading existing equipment, we provide flexible solutions including decoilers, servo feeders, straightener feeders and integrated decoiler-straightener machines. ⚙️ AVAILABLE SOLUTIONS Compact Press Feeding Lines Complete systems including: Decoiler Straightening Servo Feeder Press Integration Automation System Ndedpfx Aqey Ak Iqswsa Standalone Machines: Decoilers Servo Feeders Straightening Servo Feeders Decoiler-Straightener Machines Press Feeding Units 🔧 SERIES OPTIONS The compact systems are available in three performance classes: L Series – Low Capacity Solutions M Series – Medium Capacity Solutions H Series – Heavy Duty Solutions Capacity, coil width and configuration are customized according to customer requirements. ⚙️ ENGINEERING FEATURES Compact space-saving design Servo motor controlled feeding systems Accurate feeding and synchronization with press operations Straightening system for improved material flatness Integrated automation system (PLC & HMI) Modular design for future upgrades Retrofit compatibility for existing production lines ⚡ OPERATIONAL ADVANTAGES Complete turnkey press feeding solutions Ideal for new investments and line modernization Reduced downtime and improved productivity Flexible machine combinations Easy installation and operator-friendly use Short lead time compared to European manufacturers 🏭 APPLICATION AREAS Press shops Metal stamping production Roll forming pre-feeding systems Automotive suppliers White goods industry General sheet metal processing 🧩 OPTIONAL CONFIGURATIONS Press included turnkey solutions Custom decoiler capacities Different feeder widths and thickness ranges Automation upgrades Tailor-made engineering solutions 📸 REFERENCE PROJECTS Images included in this listing show different compact press feeding configurations successfully manufactured and commissioned for various countries and industrial applications. Additional references and technical details can be provided upon request.

Condition: repair required (used), UDA 150 S - carton feeder or sleeve feeder suitable for mounting a printer or label applicator - widely used in the pharma industry - For parts or repair - some spares with the machine and basic wiring details. Ndedpfx Aexyyz Eoqwea READY TO SHIP WORLDWIDE Export documentation and shipping available

Condition: excellent (used), Year of construction: 2017, operating hours: 2,728 h, Doosan Puma GT2100 CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Ndsdpfx Aozt R Ucsqwea With Samchully MH-208 V1 Ø203mm 3 Jaw Power Chuck. Maximum Swing Ø600mm. Maximum Swing Over Cross Slide Ø390mm. Maximum Turning Ø390mm. Maximum Turning Length 562mm. Bar Capacity Ø65mm. Axis Travel 'X'=230mm, 'Z'=580mm. Rapid Feedrates 'X'=24m/min, 'Z'=30m/min. Spindle Nose A2-6. Maximum Spindle Speed 4,500rpm (18.5kW Motor). 12 Station Turret. Programmable Tailstock Travel 580mm, Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. S/No. ML0228-001618 (2017). Note: Low Running Hours 2,728. With Coolant System, Tool Setter, Parts Catcher, Ø165mm Collet Unit, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,940 x W1,632 x H1,700mm. Weight 3,500kg.

Condition: excellent (used), Year of construction: 2016, operating hours: 11,000 h, Ref: 11132 . 2016 Muller Martini Ventura MC 160 Latest Model, Fully Automatic Book Sewer capable of 160 cycles p/min Excellent condition - Only 11,000 hours worked! Equipped with: Touch Screen Commander control ASIR III automatic signature control Servo drives 11 stitches / opening 2+2 Venturi jets Leaf chain for thin signatures Device for thread melting Belt delivery Ndjdpfxezpv Efe Aqwja Features: Patented loop formation using blow air and an active thread cutting system Active thread divider system as standard - this is not part of the basic equipment of any other entry-level model in the market. It guarantees that threads are trimmed between the individual book blocks without tension. 1. The punch needles make the holes in the signature from below. 2. Sewing needles pull the thread through every other hole 3. Air blast blows the thread as a loop into the slotted lever 4. The hook needle grabs the loop. Then the hook needle and sewing needle pull the thread up simultaneously, creating the thread chain. Wide Range of Sizes: Designed for the most common size and fold types, it can process signatures ranging from; 120 to 425 mm in length and from 75 to 320 mm in width, and from four pages to 4 mm in thickness. User friendly: Job changes can be performed quickly and conveniently thanks to the display on the touch-screen with the proven job and setup wizard from Muller Martini. Uniform icons make it easier for machine operators to get an overview of the whole machine. With its quick job changeover times, the Ventura MC 160 is suitable for both short runs and industrial three-shift operations. Specification: Max signature length: 425mm Min signature length: 120mm Max signature width: 320mm Min signature width: 75mm Max thickness: 4mm Max. speed: 9,600/hour

Condition: used, functionality: fully functional, mileage: 402,766 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Nedpfjzv Ikgjx Aqwsda Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: like new (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, rapid traverse X-axis: 42 m/min, feed rate X-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 800 mm, workpiece weight (max.): 1,000 kg, total height: 2,700 mm, total length: 3,600 mm, total width: 2,300 mm, table width: 1,100 mm, table height: 570 mm, overall weight: 5,750 kg, spindle speed (min.): 14,000 rpm, spindle motor power: 15 W, Equipment: chip conveyor, Year of manufacture: 2015 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 850 Y-axis travel mm: 520 Z-axis travel mm: 475 Feed rates m/min: 42 Rapid traverse m/min: 42 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 1100x570 Maximum workpiece size (D x H) mm: H=800mm Max. workpiece weight kg: 1000 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 20.3/14.5 (40/100%ED) Cooling Cooling through the Spindle Center: 20 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 20 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5.7 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 Njdpfeznniaex Aqwsda Air blowing through spindle center selectable via M-function Direct measuring system XYZ Paper band filter Machine running times Under power: --- Spindle Working: ----- Rated power kVA: 19 Basic machine dimensions / weight Length mm: 3600 Width mm: 2300 Height mm: 2700 Weight kg: 5750

Condition: new, Year of construction: 2026, Pneumatic double-diaphragm pump Cobra 40 -10 Its unique design enables operation with minimal pulsation. Consistent paint flow for a perfect spray pattern and the highest surface quality. Ideally suited for processing materials that are sensitive to shear and moisture. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for processing small quantities of material and for frequent color changes. Scope of delivery: Basic unit on a stand, HD double hose 7.5m, upper container 5l Ex, AirCoat pistol AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40. Technical data: Transmission ratio: 40:1 Volume flow per double stroke: 10 cm3 Volume flow at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Njdpobuqn Hefx Aqweda Available at a special price – immediately available.

Condition: used, functionality: fully functional, mileage: 448,861 km, power: 346 kW (470.43 HP), first registration: 09/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Ndodozuwq Hopfx Aqwsa Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 408,405 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment Comfort co-driver’s seat, air-sprung Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Spare wheel, in accordance with configuration for front axle tyres Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 11 mm Njdpfozuwqyox Aqwoda Front right - 13 mm Rear left inner - 7 mm Rear left outer - 8 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: like new (used), Year of construction: 2023, machine/vehicle number: 320539B, functionality: fully functional, power: 1.7 kW (2.31 HP), type of input current: three-phase, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, number of axes: 3, number of slots in tool magazine: 4, actuation type: electric, total height: 1,890 mm, total length: 2,900 mm, total width: 1,650 mm, overall weight: 1,400 kg, table length: 99,999 mm, table width: 1,300 mm, Equipment: CE marking, We are offering this virtually new Vitap K3 throughfeed machining center, manufactured in 2023. Additional equipment: 20" LCD TFT monitor Njdszv U Ncepfx Aqweda Industrial PC WSC user interface with Lister, parameter tools, and parametric settings Graphical CAD programming TPA EDI32, basic version USB port Storage of all files Macro programming DXF file import CE compliant Advantages of the machine: Qualitative machine advantages Technical advantages of the machine: Feed rate: 25 m/min Automatic 4-position tool changer Max. Horizontal tool Ø: 12 mm Max. Vertical tool Ø: 35 mm Motor: 1.7 kW Number of independent vertical axes: 12 // number of independent horizontal axes on the X-axis: (2+2) Max. Horizontal drilling depth on X and Y axes: 35 mm // max. Vertical drilling depth: 43 mm // number of horizontal drilling spindles on the Y-axis: (2+2) Electrospindle: 5 kW with ISO30 taper (rpm 12000-24000) Max. Workpiece dimensions: Y 1250 mm, Z 50 mm Min. Workpiece dimensions: X 270 mm, Y 150 mm, Z 3 mm Additional information: Axes: 3 controlled axes (X, Y, Z) X-axis: DDT feeding system Y-axis: drilling head movement Z-axis: drilling operations Optional upgrades (at an extra cost): Tool set for production start Tool holder ISO 30 / ER 32 Lubricant cartridges PC with more powerful processor Extra pneumatic top pressure Nesting system Barcode scanner Post-processor for MPR files License for TPA office software Front and rear roller support Narrow part guides Optional clamping opening for 60 mm thickness Options for angular transmission CAD design software for furniture construction *There may be differences between the displayed data and the actual values. *There is no warranty on this machine; the price is an "as is" price. If you have any questions or would like more information, please feel free to send us a message or call us. Available for pickup in Enkhuizen around the beginning of October 2026.

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 11,000 kg, table length: 1,700 mm, table width: 620 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 1,300 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 1600 machining center in cross-table configuration stands for high precision, robust design, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock Nodpfx Aqehy Atiewsda ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24 months warranty Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated belt chip conveyor ✔ Preparation for the integration of a rotary table ✔ Complete enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create a customized offer.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 7,500 kg, table length: 1,150 mm, table width: 550 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 32,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 15,000 rpm, spindle nose: SK 40 BIG PLUS (BVD 40), tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 1050 machining center in a cross table design stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from the warehouse ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and lease-purchase options available on request ✔ 24 months warranty Technical equipment: Control: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Includes the following accessories: Ndedpfxehy Ar Ts Aqwsa ✔ Longitudinal articulated band chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, type of input current: AC, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rotational speed (max.): 12,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 400 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The LAGUN L 850 machining center in a cross table design stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and job manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel included ✔ Financing and leasing options available upon request ✔ 24-month warranty Nedpfxsm Tv Sbj Aqwjda Technical equipment: Control system: ✔ HEIDENHAIN TNC 7 Basic ✔ HEIDENHAIN TFT screen 16" ✔ HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal hinged band chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC C-axis (for groove) AND T-axis Bed size 1500x3000mm Ndsdpfx Aqszi T Uqowea Selection of cups and tools included This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Can show buyer the basics on how to use machine. Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required

Condition: used, functionality: fully functional, mileage: 214,374 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Gearbox: I-shift Automated 12-speed - GCW 60 tonne Engine type: NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries : 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro standard: Euro VI SCR, EGR and particulate filter Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCooling : Without Parking heater (Webasto): 1.8kW Air to air Fridge: 33 litre under bunk mounted fridge / freezer with dividers Air conditioning: Electrically controlled air conditioning with sun sensor Driver attention support: Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.1 tonne Adaptive cruise control: NO I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Advanced Emergency Brake System Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: without Nedpfx Aqeztnd Ujweda Volvo Extended Front cab: PART OF AERO CAB Technology Display, media display: Infotainment System Telematics connection gateway: GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Headlights Automatic - LED headlights Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 14 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 241,496 km, power: 368 kW (500.34 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,809 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Battery 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI SCR, EGR and particulate filter Rear view camera: Without Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver attention support: NO Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver-side Technical specifications Ndjdpfx Aoztm I Soqwoa Wheelbase: 3800 mm Fifth wheel height: 160mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Full air cab: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system Fuel tanks capacity (left, right): 450L fuel tank - right hand side, 650 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 90 litre for 710mm diameter fuel tanks Additional roof lights: Without Tyres Front tyre 385/65R22.5, Drive axle tyre 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: NO Headlights: Halogen H7 Roof lights: without Side Skirts: Without Deflectors: Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Basic finish - Satin badges, Grey grille, instep, bumper & spoiler, mirror housing and sun visor Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: KUKA, This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information. Additional equipment • Resolver Cable: 16m • Motor Cable: X7.x flexible, 15m; X30 flexible, 15m • Three-phase Servo Motor: TYP-K/1FK7103 • Reference Switch Assembly: 25m angled / Reference Switch Unit: Cable trailing 15.0m • Adjustment Equipment Set for Additional Axes • SmartPAD: 1.0 / SmartPAD Holder: Medweiß 610 / Extension Cable SmartPAD: 25m and 10m • Scope of delivery: Robot, control cabinet & cable. Machine Benefits Technical Machine Benefits Ndodpfx Aszvv E Seqwja • Production hours: less than 1000 machine hours • Positioning robot: kr c4 / special paint finish: mechanics and base / cooling: standard medwhite 610 / krc4 basic enclosure: eu medwhite / disconnector: 8 kva 380/400/440-400/230v, 25a • Mains supply: eu han6 transformer 8 kva mbc / enclosure paint: siemens white 610 /labeling set: de/en kr c4 • Ethernet interface: x67. 1-3 / reference switch interface: x42 / external power supply interface: x55 / csp standard: 2xusb3. 0 / rj45 - ksi • Controller: mcc-30s med / kss: 8. 3/ safe operation: 3. 2 / ethernet krl: 2. 2 / robot sensor interface: 3. 2 / remote service: 1. 1 / profinet controller/device: 3. 1 • Load: 270 kg / range: 2696 mm