Used Mhs Basic Breadslicer for sale (2,058)

Condition: ready for operation (used), EWM Phoenix 351 Basic Plus KW welding machine Todpfjyh Az Ajx Ac Teb For technical specifications, please refer to image no. 2. You are welcome to visit and inspect the machine. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations from the technical specifications as well as errors in the item description may occur and are subject to change.

Condition: good (used), Year of construction: 2017, operating hours: 758 h, load capacity: 1,000 kg, lifting height: 1,262 mm, fuel type: electric, mast type: duplex, construction height: 1,940 mm, empty load weight: 700 kg, mileage: 758 km, This electric triplex stacker from Still, year 2017, is in good condition. The capacity is 1,000 kg. The stacker lifts up to a height of 2,024 mm. Drive-through height is 1,565 mm. ONLY 291 operating hours on the clock. The battery is equipped with an INTERNAL charger. Make an appointment for a test drive. Watch the video on YouTube. Tjdpfx Aex Ahgbsc Tob

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays Tjdpfeyhi Hujx Ac Tob * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, For sale: a Hammer K3-Basic panel saw. This machine has been used in our showroom as a demonstration model. Therefore, it can be described as being in new condition and comes with a full warranty. Technical specifications: - Tilting circular saw 90-45° - Sliding table 800 mm - Miter fence 900 mm Todpfx Aszn I D Dec Tob - Cutting width 700 mm - 3 kW (4 hp) motor / 400 volts The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, call: 03137-3109 Related terms: circular saw, saw, table saw Reference: R-D1618

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I Tjdpfx Acoy Nnnno Teb - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier Todpfx Acey Ra Ddj Tob - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Condition: used, Technical details: jaw width: 160 mm Todpfx Acevc Dv As Tob weight of the machine approx.: 13,5 kg span width: 208 mm *

Condition: ready for operation (used), Year of construction: 1985, operating hours: 29,192 h, spindle speed (max.): 4,000 rpm, total height: 2,988 mm, total width: 4,288 mm, overall weight: 9,000 kg, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, product length (max.): 4,152 mm, number of axes: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 machine hours and includes manuals and documentation. The protective doors are partially disassembled but included. If you are looking to get high-quality machining capabilities, consider the MAHO MH 1000 C/A universal machining centre we have for sale. Contact us for further details. Tool interface ISO 50Quill stroke vertical spindle mm 100Spindle speed range rpm 20–4000Spindle speed override % 80–120Feed rate X Y Z mm/min 1–4000Feed force X Z N 8000Feed force Y N 24000Rapid traverse m/min 10Feed and rapid override % 0–140Table diameter mm 1250Table length mm 800Center bore mm 42 H7T-slots 7T-slot spacing mm 100Manual cross adjustment mm 275Table indexing ratio 1:120Table rotation per handwheel turn deg 3Table rotation per division deg 2Positioning resolution deg 0.001Increment per division mm 0.026Table swivel X-axis deg ±30Table swivel Y-axis deg ±30Table rotation deg 360Table clamping pressure bar 80Max table load kg 800Table weight kg 1100Frequency Hz 50Total connected load kVA 36Total load with coolant kVA 41Total load with coolant and tool changer kVA 46Positioning resolution mm 0.001Machine hours approx h 29192Condition currently idle not in operationDocumentation manuals availableProtective doors partially disassembled includedIncluded accessories none tool holders not includedTable axis one axis manual only not referenceable error present Tsdpfx Acoy Hizqo Tsb

Condition: excellent (used), Basic element Make Tripan (2841) 3 Type 311 Tjdpfxsmk Havj Ac Tsb Tripan steel holder basic element

Condition: good (used), Year of construction: 2011, Metalbud Nowicki MH-75 SAS Multi-Needle Injector Metalbud Nowicki supply a range of injectors with a SAS SYSTEM  Produces greater control of injection process.  SAS SYSTEM Meat Injectors are intended to implement the most complex processes of injection.The Metalbud Nowicki MH-75 SAS Multi Needle Injector is suitable for meat muscles and elements of red meat with bone or boneless, poultry and parts of white meat with bone or boneless. SAS SYSTEM advantages  High rate of repeatability throughout the operational process. Low injection rates up to 10%, as well as high injection rates up to 120%, small deviation of injection level from 0.5 to 2% high production rates in kg/h Maximum speed of injection is up to 60 cycles per minute. Injection of raw meats with different thickness without extruding brine. Allows pre-programming of injection moment, i.e. determining the layer of raw meats which will be injected and the drive of transporter is synchronised with the drive of injection head which enables many combinations of injection patterns. Multi-step filtration system Easy disassembly of injection head. Manufacturer: Metalbud Nowicki Model:MH-75 SAS Year:2011 Number of needles:75 Number of heads:1 Belt Width:370 mm Max. speed of injection:60 cycles/minute Max. output:3.000 kg/h Volume of injection:5/100% Todpfx Acow Eb S Eo Tob Machine Dimensions LxWxH:2.650x1.900x2.100 mm Machine Weight:1.000 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,200 mm, total length: 1,200 mm, total height: 1,550 mm, overall weight: 270 kg, electrical fuse: 16 A, input voltage: 400 V, power: 7.5 kW (10.20 HP), drive type: Elektromotor, TUKWIND BASIC 7 add-on air classifier with special fan impeller and solid housing design. Our smallest suction fan is suitable for extraction at one suction point. Ideally suited for fine fraction cleaning, Styrofoam extraction, and small screening machines up to 4m drum length. - Optionally can be supplemented with our PUSH blowers to increase efficiency. - Easy expansion option as a spot extractor with 10m hand suction hose. Facts: Tedpfx Acowhfqwo Tsb - Compact separation system for mounting on existing screening technology (mobile & stationary) - High suction power - continuously adjustable thanks to built-in frequency converter - Electric drive, hence very low maintenance costs - 7.5kW power requirement; Power plug: 32A CEE (16A fuse sufficient) A wide range of applications is made possible by the robust construction and individual adaptation to conveyor belts, etc. Fields of application: construction waste recycling (Styrofoam, plastic films), composting (plastic films), RDF cleaning (plastics), and more. The device can be purchased either separately or as a complete set. The set includes all necessary accessories such as: extraction hood, hoses, bends, quick clamps, net, etc.

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Tsdpjiz A Ezsfx Ac Tob Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, axle configuration: 2 axles, total width: 25,500 mm, total height: 32,600 mm, Equipment: ABS, Humbaur HBT 106224 BS Basic, sloped Technical data: Internal dimensions: approx. 6,200 mm x 2,450 mm x 400 mm Overall dimensions: approx. 8,400 mm x 2,550 mm x 3,260 mm Permissible total weight: 11,900 kg Tsdpfsyfvg Ajx Ac Tsb Payload: approx. 9,100 kg Wheelbase: 990 mm Tires: 235/75 R17.5 inches Loading height: approx. 920 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 750-1000 mm Ramp angle: approx. 16° Plank length: approx. 2,600 mm Plank width: approx. 540 mm 3 pairs of lashing rings, 3,000 kg per lashing point, lashing rings recessed in the floor 7 pairs of lashing rings, 1,000 kg per lashing point, lashing rings in the outer frame Standard equipment: Axles: axles from renowned manufacturers Suspension: low-maintenance parabolic suspension with load compensation Tires: tires according to the manufacturer's choice on steel rim Braking system: ABS braking system according to ECE directive with ALB function, ABS plug connection ISO 7638, spindle parking brake, 2 fail-safe coupling heads red/yellow ISO 1728 Towing device: drawbar with DIN screw eye Ø 40 mm, galvanized, steplessly adjustable via crank Electrical system: 24V lighting system with multi-chamber tail lights and LED side marker lights, 15-pin connector for lighting Frame: solid, welded and hot-dip galvanized frame, sloped rear area, incline 12° Floor: floor made of 40 mm softwood planks Side walls: side walls made of anodized aluminum, foldable and removable on the side, corner posts galvanized, pluggable at the front and rear Ramps: 2 foldable steel ramps, 1-piece, galvanized, laterally adjustable, ramp lift 1 gas spring per ramp, ramp locking on the rear crossmember, ramp surface made of galvanized grating Support: reinforced 12 t geared support with load and quick gear, 2 telescoping folding supports on the left and right at the rear of the vehicle Equipment: steel fenders with anti-spray mats, side impact protection up to the 1st axle, foldable, 2 chock blocks with holder, contour marking on the side and rear, space for a two-line license plate on the left ramp On request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. You can find more information on our website. ... Errors, changes and prior sale reserved!!! = Further information = GVWR: 11,900 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, - Brand: Manitou - Type : MH 25-4T BUGGIE - Year of construction: 2016 - Hours: 2544 - Engine: Kubota diesel - Drive: 4x4 Tedpfx Asx H Ayaoc Tob - Lifting capacity: 2500 kg. - Lift height: 370 cm. - Clearance height: 200 cm. - Sideshift - Work lights - Road lighting - Dutch license plate - Nice clean 4x4 forklift - Trade-in and transport possible - Safety inspection possible * Brand: Manitou *Type: MH 25-4T BUGGIE * Construction year: 2016 * Engine: Kubota diesel * Drive: 4x4 * Lifting capacity: 2500 kg. * Lifting height: 370 cm. * Clearance height: 200 cm. * Hours: 2544

Condition: new, empty load weight: 531 kg, maximum load weight: 769 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,330 mm, loading space height: 1,680 mm, loading space volume: 5.5 m³, color: white, construction height: 2,300 mm, working width: 1,850 mm, Hydraulics, automatic reverse drive, hot-dip galvanized, with sandwich body made of PurFerro, 30 mm thick roof/walls, braked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 1300kg - Unladen weight: 531 kg - Payload: 769 kg - Interior dimensions: 251 x 133 x 168 cm (L x W x H) - Overall exterior dimensions: 392 x 184 x 230 cm (LxWxH) - Loading sill height: 54 cm - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - 100km/h: at extra charge - incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 15mm - Walls: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Roof material: 30mm PureFerro sandwich structure (sheet steel/polyurethane/sheet steel) - Chassis: ALKO rubber spring axle - Number of lashing eyes: Lashing eye rail inside on the side, incl. 4 lashing eyes - Rear door Yes, single-leaf - Tailgate: No - Tailgate material: - - Tailgate/door function: espagnolette lock, stainless steel - Interior light: Yes, with switch + LED lighting - Supports: at an extra charge Overrun device & brake: Yes, Knott - Frame/chassis: V-drawbar, hot-dip galvanized - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized - Overrun device from ALKO - Floor plate 15 mm thick - Side walls and roof : sandwich construction made of PurFerro, 30 mm thick - core made of foamed polyurethane with a top layer on both sides made of galvanized and polyester-coated sheet steel - sandwich box surrounds are made of anodized aluminium - refrigeration unit (various manufacturers installed, depending on availability) - smooth-running high-performance refrigeration machine with electronically controlled defrosting - 230 volt supply voltage with interior lighting - water-protected control panel with digital temperature display - control range from +2 - + 10 C, - Cooling capacity 1800 watts at + 30 C ambient temperature - Interior light fitted, LED + conventional - Single-leaf rear door - Galvanized espagnolette lock and hinges - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - Support wheel - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - body: splash-proof - registration papers: ZBII & COC papers Accessories can be retrofitted - please enquire: - anti-theft device - rear supports - 100km/H approval with wheel bumper - lashing straps - additional lashing eyes - slotted-hole rails for tensioning straps & locking beams - bar strip with rubber coating for tensioning straps & locking beams - steel or aluminum locking beams - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Tjdpfx Aceu Hrure Tjb

Condition: new, empty load weight: 900 kg, maximum load weight: 1,600 kg, overall weight: 2,500 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,730 mm, loading space height: 1,880 mm, loading space volume: 10.3 m³, color: white, construction height: 2,580 mm, working width: 2,280 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, with doors, refrigeration unit / Pure Ferro thermal body, * IMMEDIATELY AVAILABLE * with doors, refrigeration unit / Pure Ferro thermal body Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 2,500 kg - Unladen weight: 900 kg - Payload: 1,600 kg - Interior dimensions: 318 x 173 x 188 cm (L x W x H) - Overall exterior dimensions: 464 x 228 x 258 cm (LxWxH) - Loading sill height: 60 cm - Tires: 195/65R15 steel rim - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - Incl. vehicle documents Vehicle body: - Floor: Wood, screen printing plate 18mm - Walls: Thermo sandwich body 30mm - Roof material: Thermo sandwich body 30mm - Chassis: ALKO rubber spring axle - Number of lashing eyes: optional retrofitting in lashing rail - Rear door: Yes - Tailgate: No - Tailgate material: Thermo sandwich 30mm - Tailgate/door function: Espagnolette lock - Clearance dimension tailgate/flap: - - Interior light: 12V LED & 230V interior light - Supports: optional - Overrun device & brake: yes, Alko - Frame/chassis: V-drawbar, hot-dip galvanized - Plug lighting: 13-pin - Approval: ZBII & COC papers Standard equipment: - Sturdy V-drawbar, hot-dip galvanized in an immersion bath - Continuous side members - Load area made of multi-glued screen printing plate, 18 mm - PurFerro, Thermo-Sandwich construction - sandwich panels with a core of foamed polyurethane with a top layer of galvanized and polyester-coated sheet steel on both sides - insulation 30 mm PU core - rear door stainless steel hinges - espagnolette lock and stainless steel door holder - refrigeration unit (different makes possible, depending on the pictures) - refrigeration capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - air volume flow evaporator: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display is lockable and thus protected against unauthorized operation - Electronic digital thermostat for optimum regulation of the temperature range - 230 volt interior lighting - 12 volt interior light - Lashing rings in the frame profile, tensile force 400 kg per lashing ring, Dekra tested - ALKO overrun device and parking brake - Automatic reversing system - Plastic mudguards - 13-pin plug - Reversing lights - Large reversing light - Large rear lights - Large rear lights - Large rear lights. Plug - Reversing light - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Accessories can be retrofitted - please enquire: - anti-theft device - rear supports + front supports - 100km/H approval with wheel shock absorber - side door - motorcycle rockers, - motorcycle stand rails, - motorcycle lashing straps, - lashing straps - additional lashing eyes - slot-hole rails for tensioning straps & locking bars - bar strip with rubber coating for tensioning straps & locking bars - steel or aluminum locking bars - interior lights - reversing lights - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Todpfxju Hru Es Ac Tsb

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 4 Basic Condition: New machine Todsci Su Dspfx Ac Tjb Spindle speed (continuously variable): Range A: 120 - 2,500 rpm Range B: 60 - 1,250 rpm Normal drilling capacity: 40 mm Standard features: - Continuously variable drilling feed - Thread cutting device - Continuously variable speed control - Handle cross control - Digital display for speed, feed, and drilling depth - Drill breakage function - Operating manual with the following options: - Free cutting device

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Tedpfxsv Taq Rj Ac Tjb Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch Tjdpfxsfg U Tqe Ac Tsb - CE mark

Condition: new, number 43 Positionen weight 40 kg condition neu 0 Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs. quick clamping bolts 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm Todpfjupxbvjx Ac Tsb 2 stop and clamping angles 175mm 2 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, number 24 Positionen weight 22 kg condition neu 0 Basic set 1 / 24 pieces for table top thickness 15 and 25mm 4 clamps, clamping height 300mm, variable projection 8 clamping bolts 2 pieces stop 100mm 4 pcs. stop 150mm 2 pieces stop 225mm Tedjupxh Aspfx Ac Tjb 1 piece torch holder 1 piece perforated brush 30mm 1 piece Separating Lotion 500ml 1 pc. Welding table cleaner on a natural, biological basis 500ml

Condition: new, number 53 Positionen weight 45 kg condition neu 0 Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps Tedeupxkqopfx Ac Tob 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 2 pcs. Stop and clamping angle 75mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: new, number 32 Positionen weight 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based Tedpsupxfnsfx Ac Teb

Condition: new, number 37 Positionen 28 mm condition neu Todpfx Acogazl Re Teb weight 29 kg Basic set 1 37 pieces, 28mm system, consisting of: Clamps: 4 x 280604 Bolt: 8 x 280511 Stop: 6 x 280420.N Angle: 2 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, number 65 Positionen 28 mm condition neu weight 49 kg Basic-Set 3: 69 pieces, 28mm system, consisting of: Forceps: 10 x 280604 Todpjupw Stsfx Ac Tsb Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 3 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.