Used Mep Band Saw - Automatic - Horizontal for sale (31,369)

Condition: new, Year of construction: 2025, saw band length: 4,420 mm, saw band width: 34 mm, Double-column bandsaw, fully automatic Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle tension: Width: 180 - 280mm Bundle tension height: 50 - 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2310 KG Machine dimension 2500 x 2200mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw blade tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic band breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Pgsdpfsq St U Nex Abkjn Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min Psdjrl Irvspfx Abkegn - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder Psdpfjv Say Aox Abksgn - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm Pgjdpfjwn Dy Dsx Abkjn - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Year of construction: 2007, condition: good (used), machine/vehicle number: 073759001, Offer 22489 Technical data: - Cutting range at 90°: - Round: 320 mm - Flat: 320 x 320 mm - Material feed system - Saw band dimensions: 5095 x 34 x 1.1 mm - Cutting speed: 10 to 120 m/min - Hydraulic lifting and lowering of the saw frame Pedpfsim Ildex Abksgn - Upper stroke limit of the saw frame - Cutting pressure, infinitely adjustable - Hydraulic material clamping device - Chip conveyor - Coolant system - Chip removal conveyor: 2500 mm - Drive: 400 V / 4.0 kW - Space requirement: approx. W 2500 x H 1950 x D 2000 mm - Weight: approx. 2200 kg

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt Podsfww Sqopfx Abkjgn It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 68892, Offer 26014 Hydraulic, Two-Column Guided Mitre Band Saw Automatic Machine Technical Data: - Automatic work cycle for cutting operation, hydraulic lifting / lowering of the saw frame, manual mitre adjustment with hydraulic clamping - Automatic material feed system, motorized mitre adjustment - Saw band dimensions: 4400 x 34 x 1.1 mm - Cutting speed, infinitely variable: 15 - 150 m/min - Cutting pressure regulation, infinitely variable: 10 - 15 bar - Lowering speed: 0 - 300 mm/min - Cutting range: - 30° to 90° - at 90° round: 335 mm - square-flat: 500 x 335 mm - at 45° round: 330 mm - square-upright: 320 x 335 mm - at 30° square-upright: 170 x 335 mm - Material feed automaton - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Required space (approx.): W 2300 x H 1750 x D 2200 mm - Weight (approx.): 1800 kg Pgedpsytn Diofx Abksn

Condition: new, Year of construction: 2026, Condition: New Machine type: Twin-column bandsaw fully automatic Blade dimensions: 4,240 x 34 x 1.1 mm Cutting capacity (rectangular): 325 x 380 mm Cutting capacity (round): 325 mm Bundle cutting: 190 - 300 x 70 - 140 mm Cutting speed: 15 - 100 m/min (stepless) Main drive motor power: 3.7 kW Table height: 800 mm Coolant capacity: 75 L (19.8 gal) Clamping force: 18-28 kg/cm² Control method: Hydraulic, NC Automatic Single cut length: 0-403 mm Multiple cut length: 0-9,999 mm Residual piece: 50 mm Weight: approx. 1,950 kg Dimensions (W x D x H): approx. 2,410 x 2,250 x 2,250 mm Standard Equipment: Psdpsyc Hd Tofx Abkjgn - Touchscreen control - Stepless cutting speed adjustment (frequency inverter) via touchscreen - Up to 100 jobs programmable - Automatic kerf compensation - Double retracting vices - Display for blade height and cutting speed - Blade height encoder - Work lamp - Blade cleaning brush - Coolant gun - Broken blade detection sensor - Hydraulic blade tensioning - Hydraulic carbide blade guide - Hydraulic chip conveyor - Vibration damper - Manual in English - Machine feet - CE Options: - Variable pressure adjustment for clamping jaws - Hydraulic bundle clamping - 2 meter roller conveyor

Condition: used, Year of construction: 1973, machine/vehicle number: 959, Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 VBaujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Psdpfx Ajrmul Sebkjgn Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Podpfjwdunwsx Abkogn Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Podpeyctwmjfx Abkjgn Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: new, Year of construction: 2026, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed Pgjdpfx Aoiz S Nyobken motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit Podpfoiz S I Hox Abksgn vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Year of construction: 2020, condition: new, Available from stock Strip dimensions: 4420 x 34 x 1.1 mm Podpfx Asiryf Sobksgn Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: new, Year of construction: 2026, The CORMAK H400SA automatic bandsaw is a high-performance industrial machine designed for accurate and repeatable cutting of large steel parts, tubes and closed profiles. With its double-column structure and fully automated cutting cycle, it is ideally suited for production facilities, metal workshops and logistics centres dealing with large-scale material processing. Main Advantages Automatic operation – full cutting cycle without operator intervention: clamping, feeding, cutting and arm return. Hydraulic feed and vice system – ensuring fast, safe and precise cutting. Arm and vice position memory – shortens cycle times and increases efficiency in serial production. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Large cutting capacity – materials up to Ø400 mm or 400 × 400 mm. Construction and Technology The double-column CORMAK H400SA bandsaw is built on a robust welded steel frame with a cast-iron body, ensuring maximum rigidity and vibration damping. The saw arm is set at a 3° angle relative to the work table, which facilitates cutting of profiles and hollow sections. Precision and Productivity Hydraulically controlled arm feed with adjustable cutting pressure and precision throttle valve allows accurate adaptation to various materials. The hydraulic feeding system with electronic control enables programming of cutting length and quantity. The LCD display provides information about progress, errors, and material status. An automatic stop system halts operation in case of faults or programme completion, ensuring safe and efficient performance. Applications Pgjdpjyctr Rjfx Abkon The CORMAK H400SA model is ideal for: Metalworking and steel construction industries Profile and section processing centres Serial production in workshops and industrial plants Logistics companies cutting materials to size Standard Equipment Automatic working cycle Arm and vice position memory Hydraulic unit and feed system Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade for metal CE Declaration of Conformity Technical and Operation Manual (DTR) TECHNICAL PARAMETERS Cutting range Ø400 mm or 400 × 400 mm Blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Feeder stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 1800 kg

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table – wear-free! (The saw blade channel rotates during miter cuts) - Belt tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Easy, manual movement of the clamping bar R/L - Electrical belt tension monitoring with saw blade breakage detection - Coolant pump with dual feed to the saw blade guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: ● Cutting range: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° L round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° R round 180 mm / flat 205 x 160 mm / square 160 x 160 mm Pjdpfjctgkzsx Abksgn 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive power: 1.5 kW // 400 V // 50 Hz ● Total connected load: 3.35 kVA ● Belt speed: 20-120 m/min, stepless ● Saw blade dimensions: 2910 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request!

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox Pjdsm Rg H Rspfx Abkjgn - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: used, Year of construction: 2012, Technical data: Cutting range round / square / rectangular ø: 400 / 350 x 350 / 380 x 300 mm Saw blade dimension: 650 x 50 x 2.5 mm 3 stroke speeds: 40 / 62 / 90 strokes/min Drive power: 3.0 kW Footprint (WxDxH), approx.: 1800 x 650 x 1250 mm Weight, approx.: 1050 kg Equipment: - 3 stroke speeds - Infinitely variable cutting pressure adjustment - Minimum quantity lubrication - Pre-tensioned plate guide for the saw frame - Dustproof enclosed gearbox - Accelerated return stroke of the saw frame - Enclosed oil hydraulic system - Coolant device - Limit switch - Automatic lifting of the saw frame - Miter device up to 45° Pgedpfx Aeydittebksn - 1 new saw blade

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Ks Kesmak KME 350 Shaft cutting diameter: 350 mm Square: 340 x 340 mm Rectangle: 340 x 415 mm Hydraulic control of the bandsaw arm Hydraulic control of the vise Hydraulic blade tension sensor PLC controller Mechanical feed with rollers in the vise Electronic setting of cut part length and quantity Feed cycle up to 6000 mm, any length and quantity Membrane control panel Bundle cutting possible (upper clamp) Stepless blade speed adjustment: 20-120 m/min Roller feeder 1200 mm Psdpfxsy H Rbfs Abkjgn Documentation Year 2024

Condition: new, Cutting capacity, round, 0°: 127 mm Cutting capacity, flat, 0°: 125 x 130 mm Cutting capacity, round, 45° right: 90 mm Cutting capacity, square, 45° right: 90 x 90 mm Cutting capacity, round, 60° right: 45 mm Cutting capacity, square, 60° right: 45 x 45 mm Vise opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Weight, approx.: 25 kg Features: - Saw frame swivels up to 60° - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm for vibration-free operation - Low noise due to robust design - Automatic shut-off after cutting is complete via a micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results Pgsdpsilk Ekjfx Abksn - Environmentally friendly, as the use of lubricants and coolants is eliminated - Ideal for use on construction sites due to its low weight - Base frame available as an option (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at an extra cost: 129 euros net (special price)

Condition: new, Cutting range, round, 0°: 150 mm Cutting range, square, 0°: 150 x 150 mm Cutting range, flat, 0°: 150 x 165 mm Cutting range, round, 45°: 115 mm Cutting range, flat, 45°: 115 x 130 mm Cutting range, round, 60°: 60 mm Cutting range, flat, 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw frame swivels up to 60° - With 2 saw blade speeds for optimal adaptation to the workpiece - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for vibration-free operation - Lowering of the saw arm via a hydraulic lowering cylinder - Low noise due to robust design - Shut-off after the end of the cut via a micro-limit switch - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 TPI - Quick-release vice - Material stop - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off after the end of the cut - Base frame Pgsdpfxsilk E De Abken

Condition: new, Robust double-mitre band saw for professional use in metalworking and tank construction, featuring hydraulic lowering of the saw bow. Cutting capacity: - Round 0°: 355 mm - Square 0°: 300 x 300 mm - Flat 0°: 490 x 300 mm - Round 45°: 350 mm - Square 45°: 290 x 290 mm - Flat 45°: 340 x 290 mm - Round 60°: 230 mm - Square 60°: 180 x 180 mm - Flat 60°: 220 x 180 mm Blade speed: 35 / 70 m/min Saw blade: 3770 x 34 x 1.1 mm Working height approx.: 870 mm Coolant pump: 100 W Motor power: 1.9 kW Connection: 400 V Dimensions (LxWxH) approx.: 2200 x 1400 x 1500 mm Weight approx.: 625 kg Features: - Double-mitre saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, structural and solid materials such as stainless steel, steel, etc., in industrial environments - Generously dimensioned cast saw arm for low-vibration operation - Two band speeds to optimally adapt to the workpiece - Hydraulic lowering cylinder - Automatic vice release after cutting - Quick-release vice for fast and easy clamping Pgsdpfx Aew Hxckobkon - Precise, adjustable blade guides for optimal cutting results - CE/IEC certified, German documentation and support Scope of delivery: - Bi-metal saw blade 3770 x 34 x 1.1 mm - Blade tension adjustable via pressure gauge - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off after end of cut - Base frame

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting height (max.): 1,300 mm, cutting width (max.): 1,800 mm, total length: 8,000 mm, total width: 4,000 mm, table height: 700 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, saw band speed: 100,000 mm/s, table length: 3,000 mm, table width: 1,300 mm, working height: 700 mm, HEMA CoreCutter 900 from our test center - High-performance horizontal band saw - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity - 6 years of operation in the test center - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Pgsdpfxowifxds Abken Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: good (used), Year of construction: 1998, total height: 1,700 mm, total length: 2,100 mm, total width: 2,260 mm, overall weight: 1,300 kg, cutting range round steel at 90°: 260 mm, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Pgodpsmxliwsfx Abkjn

Condition: as good as new (ex-display), Year of construction: 2026, Very robust and easy-to-use semi-automatic hydraulic double miter bandsaw. Hydraulic blade feed and blade pressure adjustable separately. Vice can be operated hydraulically and manually. Standard with 2 blade speeds. Material stop is swiveling. Coolant system and chip collection container included. Key technical data: Cutting length up to 260 mm Cutting height up to 220 mm Cutting diameter up to 220 mm Power 1.4 kW Dimensions (l x w x h) 1250 x 640 x 1300 mm Also available in other sizes (320 and 450 mm). Pedogk A Rwopfx Abkegn Request a non-binding offer. We offer delivery, service, spare parts, and bandsaw blades all from one source. Our service areas in Germany are postal codes 17, 18, 19, and 23.