Used Martin T 70 / 11Kw for sale (76,007)

Condition: used, mileage: 612,543 km, power: 419 kW (569.68 HP), first registration: 12/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2025, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Iveco Stralis 570 AS440S57T/P semi-trailer tractor unit * Intarder / tilting hydraulics * German vehicle, one owner * 612,543 km * Euro 6 Godpfx Afjzbpcvekobn * (kg): 18,000 (kg): 18,000 Unladen weight (kg): 7993 * VIN: WJMM62AW20C404055 * MOT: 01/2025 * ENGINE AND GEARBOX * 12,882 ccm, Power: 419 kW, 570 hp * Gearbox: Automatic, Intarder * TIRES AND AXLES: * Tires: 315/80 R 22.5, 385/65 R 22.5 * Axle configuration: 4x2, air suspension on the rear axle * Wheelbase (mm): 3,790 * CAB: * 2 air-suspension seats, 2 beds, auxiliary heater, automatic climate control, 2 refrigerators * Lower auxiliary headlights, external sun visor * We would be happy to prepare a personal financing/leasing offer for you! Please contact us! * FIXED PRICE...:::::PREZZO FISSO..... * Sale only to commercial businesses or for export * Errors and prior sale excepted

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Gsdpfx Aov Dz Ixjfkobn Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. Gedpfx Aey Au I Usfksbn The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: new, Condition: As new Gbodpow U Av Aefx Afkon

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight Gjdpfx Asy H Igfefkobn approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: excellent (used), Binder Climate Test Chamber MKFT 720 E3.2 Device Information Manufacturer: Binder Model: MKFT 720 E3.2 Year of Manufacture: 2017 Gbsdpfxey H H Sme Afkjn Item Number: 9020-0288 Design: Climate Test Chamber (Change-over type) Cooling: Air-cooled Description Used Binder climate test chamber. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Intended for applications in industry, research, development, and quality assurance. Technical Specifications Temperature Range: -70 °C to +180 °C Humidity Range: 10% to 98% RH Internal Volume: approx. 734 liters Max. Total Load: 160 kg Max. Load per Shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection Class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. Operating Pressure: 29 bar Performance Data - Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data - Climate Climatic range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Features Touch control panel Programmable and constant operation modes Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Scope of Delivery Binder climate test chamber MKFT 720 E3.2 Scope of delivery as shown Service prior to delivery (optional) Functional test Refrigeration service Leak test Test run with protocol Condition Used. Condition as per images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Gedey H Hk Aepfx Afkjbn Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display, digital 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chamber Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and pipe diagram Parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Supply Test chamber TSS-70/350-A Documentation (if available) Note Used equipment, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-tailored transport solution Gbjdpfxsi Ri E Uo Afksn Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader, semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with semi-circular lower part and straight connection plate, with slide-out compensation Foldable rear support Chocks with holder Aluminum side impact protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC regulations Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approx. 3000 mm long, hydraulically adjustable for crossing the gooseneck, with mechanical locking in the raised position. Operation with radio remote control Electric winch, 24 volts, pulling force 8165 kg, mounted in the center at the front of the loading platform, standing on the gooseneck, in a stainless steel box with a door (if technically possible, further verification required), operation with radio remote control, rope length 35 m x approx. 10 mm, with roller rope guide and removable guide rollers on the gooseneck and rear slope. Tie-down points, low-loader Gooseneck: 5 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 2 pairs of tie-down points in the center, each rated at 5 tons. 1 pair of tie-down mushrooms embedded at the top and outside in the outer frame on the neck slope, each rated at 10 tons. Main platform: 4 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 4 pairs of tie-down points in the center, each rated at 5 tons. 1 pair of tie-down mushrooms embedded at the top and outside in the outer frame, each rated at 10 tons. Rear slope: 4 pairs of tie-down points embedded in the outer frame, each rated at 5 tons. 5 pairs of tie-down points in the center, each rated at 5 tons. 4 pairs of tie-down mushrooms embedded at the top and outside in the outer frame, each rated at 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering joint, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a button. Air suspension with raise/lower valve, with holding function for lowering + auto-reset function Wheels and tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Vehicle stability system Axle load detection via EBS-CAN bus signal, for display on a screen in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear Lights completely in LED design 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front Additional LED work light(s) at the rear, switched via reversing light LED rotating beacon with bracket, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, low-loader, semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Foldable rear support 2 chock blocks with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Tie-down points, low-loader 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down eyes embedded in the top and side of the outer frame, each 10 tons 2 on the gooseneck 9 distributed in the low-loader area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points no more than 1100 mm 8 pairs of pocket holes embedded in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5-ton ring tie-down points) Axles + suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with raise & lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab Vehicle - driving stability system Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED-illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box embedded in the transition slope to the gooseneck followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Low-loader area including rear slope 9,200 mm Ramps Gbsdpfxsi Ri E Rj Afkjn Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor PTO with throttle, actuation on the left side in the front Hydraulic connection with SVK socket NW 10/3, without connection hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, low-loader semi-trailer Steel welded construction, fifth wheel with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Partial wheel arch fenders in front of and behind the axle assembly 1st pair of wheel recesses recessed into the gooseneck in the low-bed area, sloped for easy entry. Length at the bottom approx. 1600 mm, depth of the wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet of the wheel loader types with detailed specifications (if the overall height is exceeded). Wheel recess cover, removable from the main frame, with wooden inserts. Extensions can be pulled out to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks on the gooseneck, at the front, transversely Wooden planks 70 mm for extending to 3000 mm Tie-down points, low-loader 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down eyes recessed on the top and sides in the outer frame, each 10 tons 2 on the gooseneck, 9 distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of stake pockets recessed in the outer frame, inside 70 x 40 mm, or instead of stake pockets, 5 ton ring tie-down points recessed in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-measured to reduce tire wear and fuel consumption Air suspension Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake EBS, electronic braking system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front with raising and lowering valve Axle load detection via EBS-CAN bus signal, for display on the display in the cab, the truck must be appropriately prepared Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1 x LED rotating beacon with holder, switched via parking lights 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm, removable with plug Floor Gooseneck with steel / checkered plate Storage box recessed in the ramp to the gooseneck followed by 70 mm soft wood flooring, in the wheel recesses at the bottom and in the wheel well area, steel / checkered plate flooring Low-loader platform including rear slope 9,100 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable Gsdpfji Ri Hcsx Afkebn Additional ramp securing at the bottom

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: Gbodpfoy Hkgbjx Afken 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control Godpfey Hkd Hox Afksbn - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, power: 90 kW (122.37 HP), COMPLETE GRINDER WOLFKING in stainless steel for sale. The machine is in good condtion. Gsdpfx Aoy Ubahefkjbn The electrical panel is not included/damaged. But its a complete line for fine grinding in 2 steps.

Condition: used, Year of construction: 2003, functionality: fully functional, total width: 2,670 mm, total length: 5,000 mm, type of input current: three-phase, overall weight: 2,750 kg, workpiece height (max.): 50 mm, Gannomat Matrix 250/70 We offer this used, CNC-controlled multi-spindle boring, gluing, and dowel inserting machine, manufactured in 2003. Manufacturer: Gannomat Model: Matrix 250/70 Year of manufacture: 2003 - Suitable for flat surfaces up to a diameter of 35 mm - Suitable for end surfaces: drilling 6, 8, 10, 12 mm, gluing and inserting with a diameter of 8 mm, - Dowel length from 25 to 60 mm - X-length: 2,500 mm - Y-length: 700 mm - Maximum workpiece thickness: 50 mm - Includes miter stop - A 4-zone layout is possible with a center stop - Includes 16 suction cups and 8 clamps, as shown in the pictures - Includes vacuum pump - Simple programming directly on the machine, drilling of left and right parts is easily possible without the need for extra programming; during operation, it only needs to be positioned against the respective stop The machine is currently still in use. However, we only use it as a pure drilling machine and do not use the dowel inserting and gluing functions. An inspection can be arranged upon request. Gjdpfx Afszcf Udskobn If you have any questions or require more information, please feel free to send us a message.

Condition: good (used), functionality: fully functional, mileage: 197,000 km, power: 132 kW (179.47 HP), first registration: 08/2019, fuel type: diesel, empty load weight: 4,080 kg, maximum load weight: 3,120 kg, overall weight: 7,200 kg, tire condition: 70 %, axle configuration: 2 axles, wheelbase: 5,100 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 8,600 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 2,500 kg, permissible axle load (axle 2): 5,350 kg, loading space volume: 36 m³, loading space length: 6,050 mm, loading space width: 2,480 mm, loading space height: 2,350 mm, Year of construction: 2019, Equipment: ABS, AdBlue, Android Auto, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), lane keeping assist, onboard computer, power assisted steering, soot filter, spoiler, tachograph, tail-lift, tire pressure monitoring, truck registration, Location: Street 9, no. 33-35, 12309 Berlin-Lichtenrade (see last picture) Payload: 3120 kg 15 spaces for Euro pallets AUTOMATIC transmission AIR CONDITIONING Leaf-air suspension 1-ton tail lift Gedpfx Afszbm A Hjkebn Roof spoiler Rear view camera Electric windows Electrically adjustable exterior mirrors Multimedia radio Multi-function steering wheel Cruise control New vehicle inspection certificate Delivery possible Trade-in possible

Condition: used, Year of construction: 1988, pressure 70 t distance between columns 750 mm stroke 900 mm table surface area 700 x 1000 mm Distance table/ram, stroke up 900 mm table height over floor 680 mm ram surface 700 x 1000 mm side window 600 mm max. tool weight 5,0 t max. capacity of swivelling ram plate 2,0 t Speed down 0 - 50 mm/s Speed up 0 - 48 mm/s Working speed 0 - 8 mm/s oil volume 140 l Gsdevuumpepfx Afksbn power capacity 9,5 kW weight 8,0 t Dimensions (WxDxH) 2,2 x 1,2 x 3,7 m with swivelling ram, movable table, ejector in table

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5 water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a used temperature test chamber manufactured by Weiss Technik. This chamber is utilized for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation breakdown: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment/features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following work is carried out on our offered chambers beforehand: 1. Functional inspection and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data; specifications may vary!) If you have further questions, we are happy to assist you by phone. Gsdey El Ttjpfx Afkebn

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. Godpfx Ajy Ir Nyofkobn We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Gedpfx Aey D Nyujfkebn Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: good (used), Year of construction: 2009, operating hours: 9,714 h, load capacity: 1,800 kg, lifting height: 4,697 mm, fuel type: gas, mast type: triplex, construction height: 2,150 mm, Still RX 70-18 Triplex 470 Freelift / Sideshift / 4th Function LPG 2009 Video can be sent via Whatsapp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. carries a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You are welcome to schedule a viewing and/or test drive without obligation. Please call in advance as we are not always present. Gbsdpfxey Nbr Ts Afken Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 383,450 km, power: 335 kW (455.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,730 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ANTOS 2546 L Beverage Body, 7.70 m, with BÄR 2,000 kg Tail Lift * Body: EWERS SWIVEL WALL - Superstructure * Hydraulically steered 3rd trailing axle * ONLY IN COMBINATION WITH TRAILER VEHICLE NO. 4452, complete, net price €57,650.-- + * Vehicle No. for customer inquiries: 4449 * Engine type: Euro VI, with OBD-C * Trailing axle, 7.5 t, steered, with load compensation * Predictive Powertrain Control * Secondary water retarder * Active Brake Assist * Differential lock, rear axle * Air conditioning * Bunk, lower * Lane Keeping Assist Gedpfx Asxx D S Ssfkobn * Environmental badge (green) * Attention Assist * High Performance Engine Brake * Air suspension, rear axle * Air deflector, lockable * Axle configuration 6x2 ENA * Maintained according to service schedule * Stability Program (ESP) * Front axle with air suspension * Hot water auxiliary heater, cab * Trailer brake connection at the rear, Duo-Matic + Standard * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pin * Antos * Electronic brake system with ABS and ASR * Driver's air-suspended comfort seat * Transmission G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Tire pressure monitoring * Locking system, with central locking * External sun visor, transparent * Digital tachograph, EC, speed * Fuel tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Storage tray, low, on engine tunnel * AdBlue tank 60 l, left * Start-off assist, speed limiter 30 km/h * Roof hatch/ventilation flap, roof * Heater, electronic compressed air supply unit * M-Cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Wheelbase 4600 mm * Tires tubeless, 315/70 R 22.5 rear axle * Tires tubeless, 315/70 R 22.5 front axle/front lift axle/rear lift axle * Reversing warning signal * Preparation for toll collection * Additional stabilizer, rear/trailing axle * Aluminum rims 9.00 x 22.5, Speedline * Weight variant 26.0 t (8.0/11.5/7.1) * Preparation for low-profile coupling system No liability for printing and typographical errors Sale only to commercial customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase agreement is decisive. * TOP SERVICE + QUALITY * We will be happy to provide you with a LEASING-FINANCING-RENT-TO-OWN offer Guarantee insurance possible on request with the insurance company * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs license plates for 30 days All customs documents for export are possible, but must be requested individually * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Baden-Württemberg) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * constantly over 200 vehicles in stock

Condition: used, mileage: 383,450 km, power: 335 kW (455.47 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, loading space volume: 44 m³, loading space length: 7,730 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ANTOS 2546 L Beverage Box Body, 7.70 m with BÄR 2,000 kg Tail Lift * Body: EWERS SWIVEL WALL – Canopy * Hydraulically steered 3rd trailing axle * ONLY IN CONJUNCTION WITH TRAILER, Vehicle No. 4452, complete, net price € 57,650.00 + * Vehicle No. for customer inquiries: 4449 * Engine version Euro VI, with OBD-C * Trailing axle, 7.5 t, steered, with load relief * Predictive Powertrain Control * Secondary water retarder * Active Brake Assist * Differential lock, rear axle * Air conditioning * Bunk, lower * Lane Keeping Assist * Environmental badge (green) * Attention Assist * High Performance Engine Brake * Air suspension, rear axle * Air deflector, lockable * Axle configuration 6x2 ENA * Well-maintained, service booklet available * Stability Control Assistant (ESP) * Front axle with air suspension * Hot water auxiliary heater, cab * Trailer brake connection at the rear, Duo-Matic+Standard * Trailer brake, 2-line, brake connections on the left * Trailer socket 24 V, 15-pole * Antos * Electronic brake system with ABS and ASR * Driver's air-suspended comfort seat * Gearbox G 211-12/14.93-1.0 * Mercedes PowerShift 3 * Tire pressure monitoring system Gbedpfx Ajxx D S Eofksn * Locking system, with central locking * Exterior sun visor, transparent * Digital tachograph, EC, speed * Tank 390 l, left, 650 x 565 x 1250 mm, aluminum * Cruise control * Low storage compartment on the engine tunnel * AdBlue tank 60 l, left * Start-off assistance, speed limitation 30 km/h * Roof hatch/ventilation flap, roof * Heater, electronic compressed air supply unit * M-cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Wheelbase 4600 mm * Tires tubeless, 315/70 R 22.5 rear axle * Tires tubeless, 315/70 R 22.5 front axle/front steering axle/trailing axle * Reversing warning device * Pre-installation for toll collection * Additional stabilizer, rear/trailing axle * Aluminum rims 9.00 x 22.5, Speedline * Weight variant 26.0 t (8.0/11.5/7.1) * Pre-installation for low-profile coupling system No liability for printing and spelling errors Sales only to commercial customers Errors and prior sale reserved* Changes, prior sale and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. * TOP SERVICE + QUALITY * We will gladly provide you with a LEASING, FINANCING, HIRE PURCHASE offer. * Guarantee insurance possible upon request with the insurance company. * TÜV / UVV tail lift / tachograph test and installation of OBU device by our partners on site * Customs license plates for 30 days * All customs documents for export are possible, but must be requested individually. * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen (Württ.) train station * TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * constantly over 200 vehicles in stock

Year of construction: 2021, operating hours: 4,748 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, total operating hours: 4748.2 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Model designation explanation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (model series) Equipment features: - Stainless steel interior - Recirculating air fans - Touch control (WEBSeason) - Viewing window - Automatic/manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Gbsdpfx Ajy Dd Nqofkon Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1200 kg For your peace of mind as a buyer, the following work is carried out on our chambers prior to sale: 1. Functional inspection and replacement of any necessary components 2. New filling with legally compliant refrigerant when required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, operating hours: 5,128 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. This chamber is used to test components and materials under various temperature conditions (e.g., cold, heat, aging). Meaning of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70 °C) e = energy-optimized design 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculating air fans - Touch operation (WEBSeason) - Viewing window - Automatic / manual temperature control Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rates: Godpfx Afjy Dclwjkobn Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Connection: 400 V / 50 Hz / 3~ Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and data are subject to change and errors reserved!) If you have any further questions, we will be happy to answer them by phone.

Year of construction: 2021, operating hours: 5,018 h, condition: excellent (used), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021 Operating hours: 5018 h For sale is a used temperature test chamber from Weiss Technik. The test chamber is used for testing components and materials under various temperature conditions (e.g., cold, heat, aging). Designation meaning: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low-temperature range (-70 °C) e = energy-optimized version 5 = temperature change rate (series) Features: - Stainless steel interior - Recirculation fans - Touch operation (WEBSeason) - Viewing window - Temperature control (automatic/manual) Technical specifications: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: Cooling: approx. 6 K/min Heating: approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (H x W x D) Internal dimensions: approx. 950 x 1100 x 950 mm (H x W x D) Gbedpfxoy Dclqe Afkjn Connection: 400 V / 50 Hz / 3-phase Rated current: approx. 34 A Power: approx. 21 kW Refrigerant: R449A / R23 Weight: approx. 1300 kg For your peace of mind as the buyer, the following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications!) We are happy to answer any further questions by phone.