Used Martin T 70 / 11Kw for sale (75,899)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 155 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 1,000 rpm, total length: 3,300 mm, total width: 1,985 mm, total height: 1,510 mm, overall weight: 1,100 kg, table height: 900 mm, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, • Smooth-running saw blade • Cutting width 1350 mm • Precisely operating crosscut table, length 3.3 m • Easy-to-use parallel guide • 7'' touchscreen control panel • Modern SynchroDrive drive technology Godpfx Agjzvdwpo Tjuh • Handwheel for positioning the parallel guide • Guide plate holder • Electronic preparation for retrofitting a scoring unit • Standard cross table for length stop for miter cuts up to approximately ± 47° • Table extension at the rear 700 x 855 mm – standard • Weight approximately 1,100 – 1,400 kg

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Gjdpfsyync Tjx Ag Tsuh Weight approx.: 740 kg

Condition: used, Year of construction: 1991, Slider length: 3300 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 170 mm Scoring blade: no Saw blade height adjustment: hydraulic Saw blade swivel adjustment: hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: scale Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Gusdpfx Agozdzbho Tjh Weight: approx. 1300 kg

Year of construction: 1968, condition: ready for operation (used), Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement. Gusdpfex Th Ngjx Ag Toh

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Gsdpfxoy A I Nro Ag Tjuh Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Gsdsyamrljpfx Ag Touh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 125 mm, number of blades: 4, actuation type: electric, rotational speed (max.): 5,000 rpm, total length of planing tables: 1,260 mm, total width: 1,280 mm, total height: 1,220 mm, overall weight: 1,200 kg, Equipment: CE marking, documentation/manual, • Operation: 1-axis control for planing dimensions, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence. • Buttons for manual quick and fine adjustment of the planing thickness according to the digital display. • Push buttons for starting and stopping the cutterhead. • Integrated operating hour counter. • TERSA all-steel cutterhead with 4 knives. • 2nd rubber feed roller, 85 mm, complete. • Thickness table extension, foldable, 630 x 450 mm. • Thickness table: Electric thickness table adjustment with fine adjustment, feed speed 10 mm/s, mounted on 4 support spindles to ensure stability, table surface finely planed. • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, rubber rollers are material-friendly and self-cleaning, easy roller replacement; articulated pressure bar at the infeed. • Extraction: High-pivoting, divided hood with chip extraction connection Ø 160 mm, can be connected on the left or right (on both sides in special cases), minimum extraction air volume: 27 m³/min. at 20 m/s. Guedpfszvfm Esx Ag Toh • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutterhead via grease nipples. • Weight: approx. 1,200 – 1,400 kg • Workpiece length min. 270 mm.

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Gsdpfoyymtdjx Ag Tsuh Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: Planing width: max. 630 mm Planing height: 2.8 - 300 mm Maximum planing removal: 12 mm Workpiece length min.: 270 mm Weight: approx. 1,200 - 1,400 kg Table length: 1,260 mm Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; buttons for manual quick and fine adjustment of the planing thickness according to digital display, push buttons for starting and stopping the cutterhead, integrated operating hour counter - Cutterhead: Tersa full steel cutterhead with Z 4 - Thickness table: Electric thickness table adjustment with fine adjustment, feed rate 10 mm/s, mounted on 4 support spindles for tilt stability, table surface finely planed - Feed: 2 speeds 6 / 12 m/min - Extraction: Hinged, split hood with chip extraction connection Ø 160 mm, can be connected on the left / right (in special cases on both sides); minimum extraction air volume: 24 m³/min at 20 m/s, negative pressure 1,050 Pa Planing width: split hood with chip extraction connection - Maintenance device: Central lubrication strip for oil lubrication points; lubrication of bearings / cutterhead via grease fittings Accessories: 1 grease gun, filled with long-life grease 1 oil can 1 adjustable wrench 1 tool for cutter replacement 1 pair of blank cutters 640 mm 2 pairs of TERSA reversible cutters 640 mm CV - Electrical equipment: Electronic soft start/brake device; contact for controlling the extraction; motor circuit breaker and winding protection, undervoltage protection; lockable main switch, 2 EMERGENCY STOP buttons (infeed / outfeed); required voltage supply: 3 ~, 400 V - 50Hz - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idling noise (without extraction) P1 65 Working noise (with extraction) P1 77 Idling noise (without extraction) P2 65 Working noise (with extraction) P2 77 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idling noise (without extraction) 84 Working noise (with extraction) 90 - Dust emission DGUV test "tested for wood dust" according to DGUV 209-044 / BGI 739-1 Special equipment: -Drive power 7.5 kW (10 hp) -2nd rubber feed roller, ø 85 mm, complete -Thickness table extension, foldable, 630 x 450 mm -Special speed 6,000 rpm Location: Rieth Godpez A Hhuefx Ag Touh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 15,868 h, load capacity: 1,600 kg, lifting height: 4,630 mm, free lift: 1,420 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: VW, fork length: 1,200 mm, tire condition: 10 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,158 kg, total height: 2,250 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.630 mm Closed height: 2.250 mm Free lift: 1.420 mm Godpfjz Aqhnjx Ag Tjuh Mast: Triplex (3F463) Fork length: 1.200 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (10%) / 18 x 7 - 8 (10%) Service weight: 3.158 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 15.868 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202054 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating Gusdpfxjqlck Ns Ag Teh construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connections: 80 and 120 mm INCLUDED: Laser cutting line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Gjdoxzfqbepfx Ag Teuh Weight approx. 1200 kg Note on used machines: • Errors in technical details and prior sale reserved. • Prices listed are ex-works prices – loading free of charge! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no claim to warranty. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Martin t60 panel saw carriage: 330 cm, tilt: 0-45 degrees, and motorized adjustment of the blade height, sliding table on the right side, manually adjustable up to 1250 mm with an electronic display, 3-axis scoring saw, electrically adjustable, scoring saw that extends and retracts pneumatically, main motor: 5.5 kW, 3 cutting speeds, max. blade diameter: 400 mm. Godpfx Agozzdi Ns Tsuh

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. Gujdpoqlckpofx Ag Teh upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1981, spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm Guedpfewnbfkox Ag Toh -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Condition: used, Martin t60 panel saw Guedszlnmgspfx Ag Teh carriage length: 510 cm, tilting angle: 0-45 degrees, with motorized blade height adjustment, rip fence on the right side, manually adjustable up to 1200 mm with an electronic display, 2-axis scoring saw, electrically adjustable, scoring saw extending and retracting pneumatically, main motor: 5.5 kW, 3 cutting speeds, maximum blade diameter: 400 mm.

Condition: used, Year of construction: 2014, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, total length: 2,800 mm, total width: 2,100 mm, total height: 1,700 mm, overall weight: 900 kg, Equipment: CE marking, saw blade guard, scorer, No. 04540 Sliding table saw Martin TC 660 Used, year of construction 2014 Sliding table length 2600 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 3000 / 4000 / 5000 rpm 2-axis scoring unit with manual adjustment Manual saw blade tilting 0° - 46° Electric cutting height adjustment Crosscut table approx. 1250 x 700 mm LW Tiltable crosscut fence extendable up to 3200 mm Saw blade guard can be swung away CE-compliant Incl. operating manual as a .pdf-file Transport dimensions approx. 2800 x 2100 x 1700 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Gujdpfx Agozmgkaj Teh Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Gjdpfx Agez A Dmze Touh Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Guedpfeqlclbox Ag Tjh Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 8,047 h, load capacity: 1,600 kg, lifting height: 4,580 mm, free lift: 1,430 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, motor manufacturer: VW, fork length: 1,380 mm, tire condition: 90 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,162 kg, total height: 2,200 mm, total length: 2,300 mm, total width: 1,120 mm, fuel: liquid petroleum gas (LPG), Equipment: cabin, sideshift, STILL RX 70-16 T – LPG forklifts TECHNICAL DATA Gusdpfx Aez Aqhujg Tsh Lifting capacity: 1.600 kg Lifting height: 4.580 mm Closed height: 2.200 mm Free lift: 1.430 mm Mast: Triplex (3F458) Fork length: 1.380 mm Fork carriage: 2A Drive: 4-Zyl. Treibgas Engine: VW Tyres: Superelastik SE 18 x 7 - 8 (90%) / 18 x 7 - 8 (90%) Service weight: 3.162 kg Length: 2.300 mm Width: 1.120 mm Year of manufacture: 2020 Operating hours: 8.047 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1202053 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Testing Chamber Manufacturer: CTS GmbH Model: T-70/600 Machine type: Temperature testing chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature testing chamber from the year 2018. This air-cooled unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, as well as development and stress tests. The stainless steel test chamber has a volume of approx. 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Standalone unit, air-cooled Temperature range: -70 °C to +210 °C Temperature stability over time: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 3.5 K/min Cooling rate: approx. 3.0 K/min CE marking available Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Guodpfozmrmyjx Ag Teh Dimensions and weight: Test chamber internal (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air with Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door closure Movable design with rollers Test chamber and condensate drain Note: This unit is a temperature testing chamber. Humidity control is not available. Condition: Used Optical condition according to pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature testing chamber Accessories as shown in the pictures The table shown in the photos as well as other items not explicitly mentioned are not included in the sale. Shipping via freight forwarder is possible. Loading with a forklift is possible. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), CTS T-70/600 Temperature Test Chamber Manufacturer: CTS GmbH Model: T-70/600 Year of manufacture: 10/2018 Machine type: Temperature test chamber Test chamber volume: approx. 600 liters Temperature range: -70 °C to +210 °C For sale is a used CTS T-70/600 temperature test chamber from 2018. This air-cooled, stand-alone unit is suitable for professional temperature testing, environmental simulations, material testing, quality assurance, and development and stress tests. The stainless steel test chamber has a volume of approximately 600 liters. Technical data: Manufacturer: CTS GmbH, Hechingen Model: T-70/600 Year of manufacture: 10/2018 Test chamber volume: approx. 600 liters Design: Stand-alone unit, air-cooled Temperature range: -70 °C to +210 °C Temporal temperature stability: approx. ±0.3 K Max. heat compensation at +20 °C: approx. 4,000 W Heating rate: approx. 4.03 K/min Cooling rate: approx. 3.17 K/min CE marking present Electrical data: Rated voltage: 400 V / 3/N / 50 Hz Rated power: 9.1 kW Rated current: 14.6 A Protection class: IP22 Refrigeration system: Design: air-cooled Pre-cooling stage: R452A, 2.4 kg CO₂ equivalent: 5.14 t GWP: 2,140 Cooling stage: R23, 0.8 kg CO₂ equivalent: 11.25 t GWP: 14,800 Operating pressure PS: 25 bar Test pressure PT: 27.5 bar Guedpfxszmqx Is Ag Tjh Dimensions and weight: Internal test chamber (H × W × D): approx. 850 × 850 × 830 mm External dimensions (H × W × D): approx. 1,900 × 1,120 × 1,875 mm Weight: approx. 600 kg Sound pressure level: below 58 dB(A) Equipment: Capacitive multi-touch display Integrated program generator Fixed value and program operation Stainless steel test chamber, material 1.4301 Viewing window with interior lighting Temperature measurement via inlet and outlet air using Pt100 Software temperature limiter Ethernet, RS232 and USB interface Digital outputs for test item control Lateral cable entry Lockable door latch Mobile design with rollers Test chamber and condensate drain Workshop inspection: Functional test performed Electrical connection and phase sequence tested Heating and cooling function tested Speed test performed LAN communication and buffer battery tested Inspection seal applied Note: This unit is a temperature test chamber. Humidity control is not available. Condition: Used Optical condition as shown in the pictures Normal signs of wear and tear due to age and use Scope of delivery: CTS T-70/600 temperature test chamber Operating manual and technical documentation Test and workshop documents Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder possible. Loading possible with a forklift. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Guedpfx Agszz Ahqj Tsh Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Guodpfxoh U A Eve Ag Toh Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Star-delta switch

Condition: used, Year of construction: 1990, with Tersa cutter shaft Machine in working order completely set up used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T43 Year of manufacture: 1990 Machine no.: V 177666 GS-tested GS-tested for wood dust Segmented pressure beam Rubber feed roller Rubber extraction roller Feed rate m/min: 6 9 12 18 m/min Number of cutters: 4 automatic motor brake Tersa reversible cutters Digital display for planing height electric height adjustment with tip fine adjustment Motor kW: 5.5 Planing width approx. mm: 630 Planing height approx. mm: 250 Dust extraction connection mm: 160 Space requirement approx. L x W x H mm: 1200x1250x1200 mm Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Guedpfx Agszg Nl To Tjh Handover in current condition as inspected, without warranty