Used Magni Loader/Unloader for sale (5,902)

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Isdpfjz Dmn Rex Afujbc Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket * Fork * Rotating beacon Ibedpfx Afsz E Uhujujc ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. Ibodpez E Uilofx Afuoc ?YOUR VTS TEAM

Condition: excellent (used), Year of construction: 2013, Well-maintained HMF 2420-K3 loading crane from 2013, featuring remote control and 6 hydraulic functions. Suitable for mounting on a truck and ideal for construction, transport, recycling, and industrial applications. This powerful HMF loading crane offers excellent lifting performance and is prepared for use with a rotator and grapple. A reliable and versatile crane, ready for immediate professional use. Specifications: HMF 2420-K3 Year of manufacture: 2013 6 functions (can be used with a rotator and grapple) Remote control Load capacity: 5070 kg at 4.4 m reach 3470 kg at 6.3 m reach 2600 kg at 8.2 m reach 2070 kg at 10.2 m reach About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Iedpfx Afsz Hpausuebc Lenskensdijk 5 2200 Herentals Belgium

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Year of construction: 2018, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Rear axle 2: Steerable Rear axle 3: Steerable Weights Ibedpjz Hq Rzefx Afuec Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History, and Condition APK (Technical Main Inspection): Valid until 03/2027 Technical condition: good Visual condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW, steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Condition: used, Year of construction: 2005, operating hours: 6,784 h, LIEBHERR L 506 Wheel Loader Year of manufacture: 2005 * Quick coupler * 42 kW * Max. speed: 20 km/h * Total weight: 6,300 kg Ibodpfx Afoz El Dmjusc * German machine

Condition: used, axle configuration: 3 axles, first registration: 01/2024, total length: 13,800 mm, total width: 2,500 mm, suspension: air, tire size: 445/40 R 22.5, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = Ibsdpfxozy R Eho Afujc - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 445/40 R 22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 6,870 kg Payload: 31,130 kg GVW: 38,000 kg Functional Loading platform height: 110 cm Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 01/2024, total length: 13,800 mm, total width: 2,500 mm, suspension: air, tire size: 445/40 R 22.5, wheelbase: 6,560 mm, Year of construction: 2024, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension Ibodpfx Afszy R Eueuoc = Further Information = Axle configuration Tire size: 445/40 R 22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Weights Unladen weight: 6,870 kg Payload: 31,130 kg GVW: 38,000 kg Functional Loading platform height: 110 cm Condition Damage: none

Condition: used, empty load weight: 2,220 kg, maximum load weight: 6,980 kg, overall weight: 9,200 kg, axle configuration: 1 axle, first registration: 04/2015, suspension: air, tire size: 215/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 1 axle, BPW axles, ABS (anti-lock braking system), lowered coupling, twin tires. Superstructure: Lift platform, rear platform extendable. Sold only with the truck MB Atego 1024 L 4x2 -89987- for 27,900 euros net. Ijdpfx Afozzbgloujbc Total price: 42,800 euros net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2006, bar feeder, second-hand manufacturer: IEMCA Ijdpfxsz A D D Ts Afujbc model: PRA 52/42/F year of construction: 2006 bundle-loading type magazine Please, contact us for getting more information and pictures on mail(at) or subject to sale and mistakes *

Condition: new, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses with covers, axle load scales, total loading platform length approx. 10,250 mm, lowbed approx. 7,150 mm long, loading height approx. 890 mm, 24 x lashing points, each 10 tons, 40 x lashing points, each 3 tons, loading ramps (approx. 3,100 x 760 mm), climbing rail on the outside of the ramps and rear slope, loading ramps adjustable laterally, wooden floor 68 mm thick, storage box with lid for lashing chains or tie-down straps, contour marking according to regulations, rotating beacon, spring-loaded parking brake, incl. axle load displays, vehicle hot-dip galvanized, surcharge for: hydraulic adjustment of the ramps = price: €1,000, -- subject to printing errors, mistakes and changes, sample images --, more data at: !, More Details: ! Iedpfx Afjz Sx Sxousbc

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, steel drop sides, hot-dip galvanized, lateral with central stanchion, pluggable, chassis: hot-dip galvanized, wooden floor, 16 lashing eyes in the outer frame, rear slanted, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood! Loading height: 880 mm, , Also available in loading area length 6.70 m Immediately available, , Rental price from 580 Euro, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Isdpfx Afez Sx U Heujbc

Condition: new, empty load weight: 3,780 kg, maximum load weight: 10,620 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, suspension: steel, tire size: 215 /75 R 17,5, color: other, gearing type: other, front tire size: 215 /75 R 17,5, rear tire size: 215/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, chassis: hot-dip galvanized, wooden floor, 10 lashing eyes, 2 x ramps (2,500 mm x 500 mm), ramps with spring jack, twin tyres: 8 compartment 215 /75 R 17.5, geared support winch with load and fast gear, front, 2 folding supports, rear, loading height approx. 850 mm , , , , -- Subject to printing errors, mistakes and changes, sample pictures --, More data under: !, More Details: ! Ibedpfx Ajz Sx S Ssfujc

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Ibsdoz Syc Espfx Afujc

Condition: good (used), functionality: fully functional, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 10/2019, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, suspension: air, tire size: 235.75 r 17.5, color: traffic orange, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Iodpfoxnqvcox Afuobc

Condition: excellent (used), Year of construction: 2016, Opportunity to buy this Universal Robot UR5 with G-loader to ensure automated loading and unloading of your cnc-machine. Including: UR5 robot, controller, touchscreen control unit, and connecting cables Software (GUI) Table with storage space for the controller and a mounting point for the touchscreen Product positioning system (incl. magazine for product carriers) Gripper (incl. valve) Air blow-off unit (inlc. valve) Compressed air treatment unit Signal tower Payload 5 kg Operating radius from rotation point 850 mm Orientation working range 720° Isdpfxsz Niqao Afuebc Gripping force 10 to 200 N Gripper opening 0 to 84 mm Full technical specifications in the attached document. Immediately available for delivery. Can be seen in operation upon appointment in Belgium. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. Iedpfjz Nf Dcox Afujbc •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle.

Condition: used, functionality: fully functional, Year of construction: 2014, Equipment: front-end loader, Front loader compatible with Kärcher MIC84: Ibedpez Niabefx Afusc + Hydraulic front loader + Support legs + Quick-change system + Mounting kit + Rear weight with mounting bracket + ALO 160H Euro bucket Receive notifications about all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: excellent (used), power: 100 kW (135.96 HP), overall weight: 7,500 kg, tire size: 400/70R20, tire condition: 90 %, Year of construction: 2024, operating hours: 559 h, Wacker Neuson WL70 (40 km/h version) Type: RL70 Iedsz Nk Hpepfx Afuebc 40 km/h version, with ABE and road approval year: 2024 operation hours: 559 hrs Radio ROPS quick coupler bucket pallet forks Alliance Reifen 400/70R20 tyres approx 90% good CE / EPA Perkins engine 100 kW operation weight: 7.5 to. new service at 500 Hrs

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg Ibodsz N Np Njpfx Afujc - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, maximum load weight: 37,150 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2026, next inspection (TÜV): 04/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment list. Complete equipment available upon request. Gooseneck * with angled front corners approximately 45° and rear slope approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick, extendable loading platform Loading platform * extendable design with rear slope approximately 1,000 mm x 8° * 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) * 3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) * 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, diamond plate flooring over the axles Kingpin supports * JOST kingpin supports (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Tires * 235/75 R 17.5 3PMSF * TPMS: TPMS tire pressure monitoring system according to ECE R 141 * Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. * For correct display, the tractor unit must be able to transmit and display this data. Axles * BPW axles and suspension, 2 fixed axles, 1 steerable axle * Technical axle load: 12,000 kg each * Electro-magnetic parking brake activated via reverse gear and manually Air suspension * with lifting and lowering valve Braking system * in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Ibjdpfx Asz N Nwyjfuec Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Painting * Complete steel construction automatically blasted with a shot blasting system after welding * Second blasting with corundum for optimal adhesion of the coating system * Final painting with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red * in accordance with the RAL system 841GL * Rims in silver gray * Rear section metallic and in RAL 9010 (pure white) * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Electrical system * in accordance with EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Included accessories * Axle tool * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * One spare wheel holder in front of the front wall * Yellow-red air couplings on the galvanized connection bar at the front * Mounting in the rear area of the gooseneck for aluminum loading ramps * Galvanized folding supports under the slope of the loading platform * One mounting for warning signs on the gooseneck and on the rear panel, left and right * including socket loadometer for determining the axle loads including load diagram * Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized locking strips are removable. (Length of the superstructure approx. 2,560 mm) * A toolbox galvanized, integrated in the angled gooseneck * 3 pairs of WADER container pockets in the loading platform for a 20' (30') or a 40' cont

Condition: used, maximum load weight: 6,300 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 10/1983, next inspection (TÜV): 09/2027, loading space length: 5,150 mm, loading space width: 2,480 mm, loading space height: 400 mm, Year of construction: 1983, Equipment: ABS, 2-Axle Müller-Mitteltal Low-Loader Trailer Type: ETü-TA Chassis / Components: * 2 x axles with drum brakes * Leaf spring suspension * Tires: 7.5R15 * Remaining tread: front ~20/80%, rear ~80% * Drawbar, height-adjustable * Eyelet 40 mm * Jost front support Body: Ibedpfx Afjz R E Rfjujc * Low-loader * Loading ramps 2.40m * Loading area: 5,150 mm x 2,480 mm x 400 mm * Side panels 400 mm * 4 x lashing eyes per side Weights: * Total weight: 8,900 kg * Payload: 6,300 kg * Tare weight: 2,600 kg Other: * German vehicle * MOT valid until 09/2027 * §25a UStG, VAT not shown. ----New MOT/inspection and weight adjustments (increase or decrease) are possible upon request. We don't leave you alone after the purchase: We will assist you in obtaining export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us – we will be happy to help! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typing errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a variety of applications. With us, it's not just about the vehicle, but also about the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That's why we will personally and reliably support you – from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will assist you with loading your purchased vehicles. Special transports We will support you in organizing special transports. Export and short-term registration plates We will assist you in obtaining export or short-term registration plates. Customs formalities We will also support you with customs matters. Vehicle transport On request, we will arrange for the transport of your vehicle within Germany.

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 x lashing eyes, 2 x ramps each 3,100 mm long x 760 mm wide, ramps with spring lifting gear, 8 x stake pockets, loading height: 900 mm, 2 x toolbox, incl. axle load indicators, , Surcharge for: Galvanized steel bulkhead: 500 ¤, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdpfjz Stprsx Afusbc

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing points, 12 pocket slots, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators, further options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with wooden supports, hydraulic adjustment of the ramps, side and front panels, also available with a K80 towing hitch!, -- subject to printing errors, mistakes, and changes, sample images --, more data at: !, More Details: ! Ibjdpfxsz R Ngrj Afuoc

Condition: new, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing points, 12 pocket slots for securing cargo, 2 ramps, each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Additional options available at an extra charge: last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber supports, hydraulic adjustment of the ramps. Also available with a K80 tow hitch! Ibodpez Stvrjfx Afuec -- Subject to printing errors, mistakes and changes, sample images -- More data available at: !