Used Linear Valve for sale (8,389)

Condition: good (used), Year of construction: 2019, 1x Geiger MidiLiner 15.0S Kedpszmw A Tofx Adqjdr Year of manufacture: 2019

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS Kdodezmkxhjpfx Adqsr V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, This listing is for Biotek Valve module Fluidic Component The unit is in full working condition and ready for immediate use The BioTek Valve Module is a fluidic control component designed for use with BioTek microplate washers and automated liquid-handling systems. It provides controlled switching between fluid supply lines and is suitable for laboratory washing applications. The module is supplied as an individual fluidic component. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Kodpfx Adezqf H Isqedr This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Kedpfx Ajwzzzfedqsdr Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11576, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 100 m/min, nominal power (apparent): 40 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 22,000 kg, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, Eima Gamma Linear model milling machine Spindle mount HSK 63 F Kedpfx Asx Uz H Iedqedr

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Kdedev Igtbjpfx Adqer Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,854 h, load capacity: 5,000 kg, lifting height: 3,450 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, mast type: other, construction height: 2,550 mm, battery capacity: 930 Ah, remaining battery capacity: 84 %, battery voltage: 80 V, DGUV certified until: 07/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-50 electric forklift with the following specifications: * Lifting capacity: 5,000 kg * Lifting height: 3,450 mm * Overall height: 2,550 mm * Year of manufacture: 2018 * Operating hours: 7,854 Kdedpfszivfxsx Adqer Still 5.0-ton electric forklift, very good battery, good tires (rear tires new), telescopic mast for clear visibility, side shifter, fork positioner, lighting compliant with StVZO regulations, fork length 1,200 mm, charger. Price ex works, including 1,000 hours of service according to STILL manufacturer’s specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-loader (transport costs upon request). Further information and offers can be found on our newly designed website!

Condition: good (used), Year of construction: 2006, CNC Milling / Turningcenter Machine type: DMG GMX 200 linear Control: Siemens 840D Year: 2006 SPECIFICATIONS Max. swing over bed: 560 mm Turningdiameter: 400 mm Spindle speeds: 0 - 4.000 rpm Spindle power: 45 / 36 kW Torque: 750 Nm C-Axis CNC-Spindle tilting for cutting and turningopertations Max. revolution: 12.000 rpm Spindle power: 13,2/22 kW Travel X-Axis: 485 mm Y-Axis: 80 +/- mm Z-Axis: 1.070 mm Rapid motion: (X/Y/Z): 40 / 24 / 70 m/min. Angular range: +/- 120° Tailstock: NC Quill: MK 5 Equipment Steady rest: SMW SLU-3.1 Chip conveyor paper band filter Cooling pumps: 8 bar; 20 l/min Kjdpfxsziy D So Adqsdr

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 100 mm, measuring range Z-axis: 1,000 mm, mount diameter: 100 mm, overall weight: 160 kg, path measurement accuracy: 2 mm, tool weight: 160,000 g, Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems Kjdpfx Aeyzzb Ssdqodr The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spindle nose 2 μm Repeatability ±2 μm Tool preseting Quick and precise measuring results thanks to intuitive operation Accurate measurement values for complex and helical cutters with the precise focus window User administration and access privileges Display currently in 16:9 format Cross hair fixed / floating with automatic measurement lines and automatic contour evaluation One design for the software of all equipment classes Windows 7 Professional or Ultimate, whatever you need Data exchange Post-processed data is transferred to the relevant data exchange drive either via the network or via USB. All equipment can provide tool data to almost any software (tool management, databases, CAD / CAM) via a bidirectional interface – irrespective of whether.

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Kedpfx Asnacu Dsdqedr Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty. Kodpozt Ipksfx Adqedr

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain TNC 530, TECHNICAL DETAILS Work Area Table surface: 2,300 x 1,600 mm T-slots: 22 mm Distance between T-slots: 200 mm Workpiece weight with optimal distribution: max. 6,000 kg/m² Distance between columns: 2,700 mm Distance between table surface and spindle center: max. 1,220 mm Travel / Axes Travel X-axis: 2,200 mm Travel Y-axis: 1,500 mm Travel Z-axis: 1,000 mm Feed rate X/Y-axis: 0 - 60 m/min Feed rate Z-axis: 0 - 40 m/min C-axis rotation: ± 370° A-axis rotation: ± 105° A-axis torque: max. 830 N·m C-axis torque: max. 1,200 N·m Milling Head / Spindle Milling head: TOE 29 T, 5-axis orthogonal milling head Spindle connection: HSK 63 A Spindle power: 29 / 37 kW Spindle torque: 92 / 115 Nm Kdedpfx Adjzhnk Doqor Spindle speed: max. 20,000 rpm Constant torque range: 0 - 3,000 rpm Tool Changer Tool changer: Automatic tool changer Tool holder: HSK 63 A-100 Magazine capacity: 42 stations Tool diameter: max. 80 mm Tool length: max. 350 mm Tool weight: max. 8 kg MACHINE DETAILS Control model: Heidenhain TNC 530 Cooling / Measuring Systems Tool coolant supply through the spindle: 20 bar Coolant flow rate: 25 l/min Measuring system X/Y/Z-axis: Heidenhain glass scales Measuring system C-axis: Heidenhain angle measuring system EQUIPMENT Heidenhain TNC 530 CNC control 5-axis orthogonal milling head TOE 29 T Electro spindle HSK 63 A Automatic tool changer with 42 stations Tool coolant supply through the spindle Laser tool presetting BLUM Heidenhain glass scales on X, Y and Z axes Heidenhain angle measuring system on the C-axis Thermal insulation and stabilization of the crossbeam Central lubrication 2 chip conveyors Portable handwheel Heidenhain HR 520 15" TFT color monitor with soft keys Full enclosure with CE safety standard Control cabinet with air conditioning Rinsing gun Sliding roof for loading and unloading Note: The operating hours can be found in the last picture.

Condition: used, functionality: unexamined, overall weight: 75 kg, Equipment: documentation/manual, Magnetic linear guides / positioning systems with Heidenhain Lida 101C scales “Magnetic Linear Motor Motion Systems” | "Linear Motor Motion System" Stroke guide: 1240 mm Kjdpfx Adow Evqcjqsdr Weight: 75 kg.

Condition: repair required (used), Year of construction: 2005, operating hours: 20,000 h, functionality: not functional, Machine Type: CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type: GMX 200 linear Year of Manufacture: 2005 Control System: Siemens 840 D powerline Location: Ober Ramstadt Technical Details Turning Diameter: max. 560 mm Turning Length: 1,070 mm Control System: Siemens 840 D powerline Distance between Spindles: 1,000 mm Main Spindle: Max. Speed: 5,000 min/-1 Drive Power - Main Spindle: 25 / 37 kW Max. Torque: 390 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Chuck Diameter: 200 - 315 mm Milling Spindle: Speed: max. 12,000 min/-1 Drive Power - Milling Spindle: 13.2 / 22 kW Max. Torque: 100 Nm Tool Interface: capto Holding Torque: Y-Axis: +/- 80 mm B-Axis: +/- 120 ° C-Axis: 1 ° X-Axis Travel: 485 mm Bearing Diameter: 80 / 55 mm Counter Spindle: Max. Speed: 5,000 min/-1 Drive Power - Counter Spindle: 25 / 37 kW Max. Torque: 320 Nm Spindle Diameter in Front Bearing: 120 mm Spindle Bore: 79 mm Max. Bar Diameter: 68 mm C-Axis: 0.001 ° Max. Chuck Diameter: 315 mm Tool Magazine: Number of Tool Positions: 46 pos.HSK 63 A Tool Interface: Max. Tool Diameter: 80 mm Max. Tool Diameter with Free Neighbor Position: 150 mm Max. Tool Length: 300 mm Total Power Requirement: 75 kVA Machine Weight Approx.: 14.0 t Space Requirement Approx.: 8.0 x 4.5 x 3.1 m Accessories Documentation: Chip Conveyor: Kdodpfezd Dw Ejx Adqer Coolant System: 8 / 20 bar C-Axis: B-Axis: Y-Axis: Tool Magazine: Counter Spindle: Milling Spindle:

Condition: new, Year of construction: 2025, pressing force: 500 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 500 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description Kdodpfx Ajx N T H Aedqjr The CRONOSSTECH CHP series H-type single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. The 8-guided H-frame structure ensures stable and repeatable operation by evenly distributing the high loads generated during pressing. The CHP 500 model is designed for long-lasting and reliable performance in heavy-duty manufacturing processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings provide uniform load distribution and long-term precision throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type frame with 8 robust slide guides - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - WPQR & WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine body designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen hydraulic unit oil temperature and system status monitoring - Cooling system - Off-line filtration - Dual-hand control system - Light curtain (operator safety standard) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 500 - Type: Steel construction, 8-guided H-type press frame - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 500 tons - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight Opening: 100 mm - Max. Daylight Opening: 1100 mm - Stress Relief: Vibration stress-relieving - Welding Application: WPQR and WPS certified by TÜRK-AK under EN ISO 15614-1/2017, welding applications supervised by certified welding coordination engineers in accordance with EN ISO 14731 - Max. Operating Pressure: 250 bar - Total Motor Power: 45 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø500 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Height: 5800 mm - Approx. Width: 3250 mm - Approx. Depth: 2200 mm - Bottom Table Height from Floor: 1400 mm - Front Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 23 tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 1,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications requiring high tonnage. The 8-guided H-frame structure distributes the high forces generated during pressing evenly, ensuring maximum rigidity, precision, and long service life. The CHP 1000 model has been developed to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered with heavy-duty industrial conditions in mind. The frame and main carrier constructions are stress-relieved by vibration. Thanks to bronze Zr14 slide bushings, even load distribution and high precision are achieved throughout ram movement. ⚙️ Standard Equipment - Steel construction, 8-guided H-type press frame - Vibrationally stress-relieved frame structure - Bronze Zr14 slide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Monitoring of hydraulic unit oil temperature and system status via display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 1000 - Type: Steel construction, 8-guided H-frame press type - Frame Material: St52 – ERDEMİR - Slide Bushings: Bronze Zr14 - Capacity (Ram): 1000 Tons - Movable Table Dimensions: 1500 × 2000 mm - Fixed Table Dimensions: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Stress Relieving: Vibration stress relief - Welding: TÜRK-AK accredited WPQR and WPS certified EN ISO 15614-1/2017 welding applications - Max. Operating Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/sec - Movable Table Forming Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø500 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6000 mm - Approximate Press Width: 3450 mm - Approximate Press Depth: 2400 mm - Height of Lower Table from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 55 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey. Kdsdpjx N T Rbefx Adqor

Condition: new, Year of construction: 2025, pressing force: 1,200 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specifically designed for deep drawing, flow forming, shaping, and heavy-duty pressing operations. Thanks to its eight-slide H-frame construction, it provides maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model offers reliable and long-lasting performance for industrial production lines requiring high force. The frame structure is stress-relieved via vibration, ensuring that loads generated during pressing are distributed evenly to maintain parallelism and squareness tolerances. ⚙️ Standard Equipment - Steel construction, 8-slide H-frame press design - Vibration-relieved stress body structure - Bronze Zr14 slide bearings - WPQR and WPS welding applications certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration Kdodpfx Asx N T Rusdqjr - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-slide H-frame press design Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1200 tons Movable Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Stress Relief: Vibro-stress-relieved Welding Application: WPQR and WPS applications certified by TÜRK-AK in accordance with EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cc – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/s Movable Table Drawing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height From Ground: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 2,500 t, stroke length: 1,000 mm, table width: 1,800 mm, table length: 2,600 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2500 H-Type Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic presses are engineered for heavy-duty forming, deep drawing, and spinning applications that require extremely high tonnage. With its 8-guided H-frame construction, the press provides maximum rigidity during operation; parallelism and perpendicularity tolerances are reliably maintained throughout the full stroke length. The CHP 2500 model, featuring large bolster dimensions, a multi-cylinder main pressing structure, and a high-capacity hydraulic system, is specifically designed for the automotive, heavy industry, defense, and high-tonnage tooling sectors. The frame structure is stress-relieved by vibration to ensure durability and reliable long-term operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Stress-relieved frame via vibration method - Bronze Zr14 slide bearings - Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” touchscreen panel (DELTA) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 2500 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2500 tons Moving Bolster Size: 1800 × 2600 mm Fixed Bolster Size: 1800 × 2600 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Min. Daylight: 200 mm Max. Daylight: 1200 mm Weld Stress Relief: Vibration method Kdsdpfx Adex N T S Esqsr Welding Certification: WPQR and WPS certified by TÜRK-AK (EN ISO 15614-1/2017) Max. Operating Pressure: 250 bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Bolster Fast Descent Speed: 150 mm/s Moving Bolster Drawing Speed: 12 mm/s Moving Bolster Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø565 mm – Ck45 (4 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6,500 mm Approx. Press Width: 3,950 mm Approx. Press Depth: 2,600 mm Lower Table Height from Floor: 1,500 mm Primary Filling Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Displacement Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 120 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8 Guideways General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame design, they provide high stability and repeatable precision during pressing operations. CHP Series – Structural Features CHP series presses are engineered with heavy-duty operation in mind. The frame and carrier components are stress-relieved by vibration. The bronze Zr14 material used in slide bearings ensures long service life and stable operation. Highlighted Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welding applications in accordance with ISO standards - PLC control with touchscreen interface - Operator safety and process stability oriented design ⚙️ Standard Equipment - Steel construction, 8-guideway H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK accredited WPQR & WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system and off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 100 Tonnes Kdsdpfx Adex N Tx Ssqor Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/mtr Perpendicularity Tolerance: 60 micron/mtr Ram Stroke: 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified welding process accredited by TÜRK-AK (certified welding supervised by engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/sec Moving Table Pressing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approx. Height of Press: 3400 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Table Height from Floor: 1250 mm Pre-Fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Tonnes Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 600 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial press solutions developed for sheet metal forming, straightening, assembly, and die stamping applications, offering high rigidity. Thanks to its 8-guided H-frame structure, loads occurring during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 200 model is specifically designed for medium to high-tonnage applications, providing reliable performance and long service life. CHP Series – Structural Features The CHP series presses are engineered considering heavy-duty operational conditions. The main frame and supporting parts are stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth ram movement and long-term precision. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guides - Stress-relieved main frame and carrier parts by vibration - Bronze Zr14 guide bushings - WPQR & WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination indicator - Monitoring of hydraulic unit oil temperature and system status via the screen - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 200 Type: Steel construction, H-frame press with 8 guides Frame Material: St52 – ERDEMİR Guide Bushing: Bronze Zr14 Capacity (Ram): 200 Tons Movable Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Kdjdpfox N T D Uex Adqor Stress Relief: Vibration stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, with EN ISO 15614-1/2017 welding certificate (supervised by certified welding coordination engineers per EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 22 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Rapid Down Speed (Movable Table): 150 mm/sec Bumping Speed (Movable Table): 12 mm/sec Return Speed (Movable Table): 170 mm/sec Main Cylinder Inner Diameter: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 3800 mm Approximate Press Width: 2950 mm Approximate Press Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 8 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 2,000 t, stroke length: 1,000 mm, table width: 1,500 mm, table length: 2,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided Slide General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications requiring very high tonnage. The rigid H-frame structure with 8 guiding slides ensures maximum rigidity during pressing operations and maintains parallelism and perpendicularity tolerances throughout the full stroke. The CHP 2000 model, featuring large table dimensions, a high-capacity hydraulic system, and a powerful motor, offers a reliable and durable solution for the automotive, defense, heavy industry sectors, and high-tonnage production lines. The frame is stress-relieved via vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, H-frame body with 8 guided slides - Vibration stress-relieved body structure - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR and WPS certified welding procedures (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) Kdsdpfx Aox N T Srsdqsr - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 - Type: Steel construction, H-frame body with 8 guided slides - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Moving Table Size: 1500 × 2500 mm - Fixed Table Size: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress-Relief: Vibration stress-relieved - Welding Application: WPQR and WPS certified by TÜRK-AK, according to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approx. Height of Press: 6300 mm - Approx. Width of Press: 3850 mm - Approx. Depth of Press: 2500 mm - Lower Table Height from Floor: 1500 mm - Main Fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC System: DELTA - Touch Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 150 t, stroke length: 500 mm, table width: 800 mm, table length: 1,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines designed for sheet metal forming, straightening, assembly, and die pressing applications. Featuring a rigid steel frame and an 8-slide H-body structure, they ensure stable, balanced, and repeatable operation during pressing tasks. The CHP 150 model is specifically developed to deliver reliable performance and long service life for medium-capacity applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty industrial use. The frame and supporting components are stress-relieved by vibration. Bronze Zr14 slide bearings provide precise load transfer and extended operational stability. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guide slides - Stress-relieved frame and support components by vibration - Bronze Zr14 slide bearings - WPQR & WPS approved welding applications with TURK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - Display of hydraulic unit oil temperature and system status on the screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 150 Type: Steel construction, H-frame with 8 guide slides Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Size: 800 × 1000 mm Fixed Table Size: 800 × 1000 mm Parallelism Tolerance: 120 micron/m. Perpendicularity Tolerance: 60 micron/m. Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TURK-AK; EN ISO 15614-1:2017 welding certificate (audited by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height: 3650 mm Approx. Width: 2950 mm Approx. Depth: 2000 mm Lower Table Height from Floor: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Ksdpfx Adex N T Dzeqsdr Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 400 t, stroke length: 800 mm, table width: 1,200 mm, table length: 1,500 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 400 H-Frame Single-Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-frame single-acting hydraulic presses are high-rigidity industrial press solutions developed for sheet metal forming, straightening, assembly, and die press applications. Thanks to the 8-guide H-frame construction, high loads generated during pressing are evenly distributed, ensuring stable and repeatable operation. The CHP 400 model is designed to deliver long-lasting and reliable performance for heavy-duty applications that require high tonnage. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved through vibration. Bronze Zr14 slide bearings contribute to long-term precision by ensuring uniform load distribution during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - TÜRK-AK accredited WPQR & WPS certified welding applications (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and production in compliance with CE standards - PLC controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 400 Tons Movable Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 microns/meter Squareness Tolerance: 60 microns/meter Ram Stroke: 800 mm Min. Clearance: 100 mm Max. Clearance: 900 mm Stress Relief: Vibratory stress relief Welding Application: TÜRK-AK accredited WPQR & WPS certified EN ISO 15614-1/2017 welding application certificate (supervised by certified welding coordination engineers in accordance with EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Down Speed: 150 mm/sec. Movable Table Forming Speed: 12 mm/sec. Movable Table Return Speed: 170 mm/sec. Main Cylinder Internal Diameter: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Machine Height: 5600 mm Approx. Machine Width: 3250 mm Approx. Machine Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Ruler: NOVATECHNIK or TURCK PLC: DELTA Kjdpfxox N T Hps Adqjdr Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 800 t, stroke length: 800 mm, table width: 1,500 mm, table length: 2,000 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guided slide H-frame construction ensures balanced distribution of high forces generated during pressing, providing maximum rigidity and long service life. The CHP 800 model has been developed targeting reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered considering heavy industrial conditions. The frame and main supporting components are stress-relieved using vibration methods. Bronze Zr14 slide bearings ensure even load distribution and precise movement throughout the ram stroke. ⚙️ Standard Equipment • Steel construction with 8-guided slides in H-type press frame • Stress-relieved frame structure by vibration • Bronze Zr14 slide bearings • Welded joints approved with WPQR & WPS certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing in compliance with CE standards • PLC-controlled hydraulic system • DELTA 7” touchscreen panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning system • On-screen monitoring of hydraulic oil temperature and system status Kdedpox N T Nkefx Adqsr • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (standard for operator safety) • SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 800 • Type: Steel construction, 8-guided slide H-frame press • Frame Material: St52 – ERDEMİR • Slide Bearing: Bronze Zr14 • Capacity (Ram): 800 tons • Movable Table Size: 1500 × 2000 mm • Fixed Table Size: 1500 × 2000 mm • Parallelism Tolerance: 120 micron/meter • Perpendicularity Tolerance: 60 micron/meter • Stroke (Ram): 800 mm • Min. Clearance: 100 mm • Max. Clearance: 900 mm • Welded Structure Stress Relief: Vibration stress relieving • Welding Process: WPQR and WPS certified by TÜRK-AK (according to EN ISO 15614-1:2017; inspected by certified welding coordination engineers per EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 75 kW – IE3 • Main Pump: 70 cm³ – REXROTH or PARKER • Movable Table Fast Approach Speed: 150 mm/sec • Movable Table Drawing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Inner Diameter: Ø390 mm – Ck45 (2 units) • Auxiliary Acceleration Cylinders: 2 units • Approx. Press Height: 6000 mm • Approx. Press Width: 3350 mm • Approx. Press Depth: 2700 mm • Lower Table Height from Floor: 1450 mm • Pre-fill Valve: NG 200 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Scale: NOVATECHNIK or TURCK • PLC Application: DELTA • Touchscreen Panel: DELTA 7” • Electrical Components: SIEMENS – SCHNEIDER • Approximate Weight: 45 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 600 mm, table width: 1,000 mm, table length: 1,200 mm, operating pressure: 250 bar, Equipment: documentation/manual, safety light barrier, CRONOSSTECH CHP 300 H-Type Single Acting Hydraulic Press – 8-Guided Sliders General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are high-rigidity, industrial press solutions developed for sheet metal forming, straightening, assembly, and die-stamping applications. The 8-guided H-frame construction ensures that the high loads generated during pressing are evenly distributed, resulting in stable and repeatable operation. The CHP 300 model is designed to provide long-lasting and reliable performance for medium to high tonnage production requirements. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and carrier components are stress-relieved via vibration methods. Bronze Zr14 slide bearings ensure even load distribution during ram movement, contributing to the preservation of precision over extended periods. ⚙️ Standard Equipment Kdodox N T E Espfx Adqsr - Steel construction, H-type frame press with 8 guided sliders - Stress-relieved frame and carrier components by vibration - Bronze Zr14 slide bearings - Welding applications certified by TÜRK-AK with WPQR & WPS approval (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in compliance with CE standards - PLC-controlled hydraulic system - 7'' DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically controlled filter contamination warning - Monitoring of oil temperature and system status of the hydraulic unit via display - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 300 Type: Steel construction, 8-guided H-frame press Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 300 Tons Movable Table Dimensions: 1000 × 1200 mm Fixed Table Dimensions: 1000 × 1200 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress relief Welding Application: Welding applications certified by TÜRK-AK with WPQR and WPS approval per EN ISO 15614-1/2017 (inspected by certified welding coordination engineers in line with EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Fast Descent Speed: 150 mm/s Movable Table Forming Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Inner Diameter: Ø390 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Press Height: 4400 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1350 mm Pre-Fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Encoder: NOVATECHNIK or TURCK PLC Application: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 10.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.