Used Langzauner Veneer Shears for sale (2,025)

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. engine output 7,5 kW Cgsdpfx Ajy Hl Rbogfju weight of the machine ca. ca 5 t dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, type plate available, Hydraulic guillotine shear Codpoy Urr Iofx Agfsgu Year: 2019 Maximum cutting width: 2 meters Maximum cutting thickness: 4 mm

Condition: used, Technical details: Codpfxsu Icn Ee Agfsgu sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm Cgsdpsu Icnrofx Agfsu back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal *

Condition: ready for operation (used), Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible. Cgedpoy Uyc Isfx Agfju

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Cgodpfx Ajza A E Isgfeu Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Cgsdoy Sbu Hspfx Agfou Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: new, Year of construction: 2026, neu 2026 090204 prompt, Zwischenverkauf v Türkei 4290 € 1 1250 mm 1.5 mm 500 mm 2250 mm 1000 mm Cjdjyz Dc Sopfx Agfogu 1150 mm 460 kg DEMO MACHINE - MINT CONDITION welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: new, Year of construction: 2026, neu 2026 090203 prompt, Zwischenverkauf v Türkei 3810 € 1 1020 mm 1.5 mm 500 mm 1950 mm 1000 mm 1150 mm Cgodpjyz Dc Ejfx Agfeu 420 kg welded steel construction with manual hold down unit back gauge adjustable by handwheel users manual in ENGLISH

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm Cgsdpjywzbdsfx Agfeu -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Cgedpfx Agjyy Tqcsfou Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: good (used), Mubea Muhr und Bender section shear combined Cgsdpfx Agjncc Huefou Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: new, Year of construction: 2026, neu 2026 090194 prompt, Zwischenverkauf v Spanien Cgedpfewirnxox Agfsu 22400 € 430.08 € 1 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: good (used), functionality: fully functional, Year of construction: 2007, Hydraulic Guillotine Shear Make: BOSCHERT Model: SX 3006 Year of Manufacture: 2007 Technical Data Csdpsy Nmh Tjfx Agfegu Manufacturer: Boschert Model: SX 3006 Year: 2007 Cutting capacity (mild steel ST 42): 6 mm Cutting capacity (stainless steel): 4 mm Cutting length: 3100 mm Throat depth: 180 mm Backgauge: 1000 mm Cutting angle: 1.35° Motor power: 12 kW Voltage: 400 V, 50 Hz Dimensions (L x W x H): 3.80 x 2.28 x 1.85 m Weight: 7 t Equipment - CNC-controlled backgauge via ELGO controller, up to 1000 mm - ELGO Electric P 87 control - Electrically adjustable cutting gap with display for selected material thickness - Pneumatic sheet support device - Electrical cutting length limiter - Angle stop - 2 support arms - Cutting line illumination - Folding finger guard, approx. 1000 mm - Rear safety light curtain - Mesh safety guard All information is subject to change and provided without liability. A demonstration under power is possible at any time in our showroom.

Condition: used, functionality: fully functional, Equipment: type plate available, SHEARING MACHINE – MARIO RIBOLDI Csdpfezbck Tjx Agfsgu 2500 X 3/4 MODEL: CEM 253 USED MACHINE INTERNAL CODE: SVR 425

Condition: good (used), punching force: 45 t, - Capacity 45 tons - Hydraulic Cgodpfx Aeu Havwogfju - 4 stations - Foot control - Emergency stop - 400 V

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Cgodsy Egkgopfx Agfeu Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, Cutting length 6.100 mm length ~ 7.260 mm Cgodpfx Agey Nn Dcofou width ~ 1.230 mm mm height ~ 1.550 mm mm Veneer saw or jointing and fine-cutting machine Scheer FM6-6100A for sawing veneer or other thin panels with automatic feed and integrated suction.

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm Cjdsy Diahjpfx Agfogu

Condition: used, Year of construction: 2008, Punching-shearing unit, complete Manufacturer: GEKA Year of manufacture: 2008 MODEL: ALPS-150 Production hours: 400 Application type: Shearing Machine type: Shearing machine Control unit brand: Fagor Cgjdsudbzyopfx Agfsu Technical specifications: General data Width: 2200 mm Depth: 1350 mm Height: 2400 mm Weight: 5000 kg Control unit Manufacturer: Fagor Model: CNC 8070 CNC main language: English CNC language customizable: Yes Main drive shear force 2500 kN Workpiece X : 15000 mm Workpiece Y: 160 mm Workpiece Z: 200 mm Max. table load: 400 kg Max. material thickness: steel 16 mm Electronic main connection 50 hz/3P Additional equipment: 3xloading table 3xside loading table 3xunloading table This GEKA ALPS-150 was manufactured in Spain in 2008 and has been in production for 400 hours. production hours. This machine is a complete automatic solution for punching, marking and shearing angles for medium and large steel profiles. With few working hours this machine is in perfect condition.

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2.5 meter guillotine shear from Durma Model: MS 2504 Capacity: 2500 x 4 mm Cgedpey Dpwgefx Agfeu Electric back gauge

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm 48 stations Csdpjy Sm Eqjfx Agfsgu 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, functionality: fully functional, Offered here is a pulverizer / demolition shear Brand: OKADA OSV-83V LENOX MS21 Suitable for 20-25t excavators Used, in functional condition. Csdpsxw N Szefx Agfogu For any questions, please contact us by phone or E-mail Shipping within Germany is possible. Please inquire about shipping costs in advance. All information is provided without guarantee or warranty. Subject to errors and prior sale. We speak French / Мы говорим по русски We speak English / Noi vorbim română Viber / WhatsApp / Skype For an additional fee, we handle all customs clearance and registration formalities. We can also transfer vehicles to the port for an additional charge. We sell exclusively according to our general terms and conditions. We do not accept any liability for errors in the vehicle description. Opening hours: Monday to Saturday 08:00 - 12:00 13:00 - 18:00 Saturday by appointment only EXPORT/NET PRICE PICK UP FROM LOCATION – DATE BY ARRANGEMENT We care for all necessary customs clearance and vehicle registrations for an additional charge. We transfer the vehicles to the port for an additional fee. We sell exclusively according to our general terms and conditions. We do not assume any liability for errors in the vehicle description. The vehicle can be laminated or labeled with advertising.

Condition: excellent (used), Year of construction: 1985, Feed rate 6 m/min. Dimensions (Length/Width/Height) 700 x 350 x 450 mm Total power requirement 0.2 kW Machine weight approx. 25 kg Year of manufacture 1985 Throat depth 420 mm - Foot pedal - Veneer thickness 0.4 - 2 mm - includes several Kuper spools Location: ex stock 54634 Bitburg - immediately available - Codpsy E T Tnofx Agfogu

Condition: used, Year of construction: 1984, total length: 3,700 mm, total width: 2,000 mm, total height: 1,650 mm, Colour: Grey Weight: 5.000 kg Cjdpfxsy Dcm Ue Agfjgu - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 8406029 - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3700mm x 2000mm x 1650mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum